Request: Pictures of Blazer/Jimmy doors for comparison on where to cut - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captkaos** · 01-23-2007, 07:30 PM

Anyone care to post some close-up pics of Jimmy/Blazer doors so I can see where pickup doors will need to be cut? I would like to see from the window opening up, the whole vent wing, and the rear of the door, and a detail of both areas preferable from the side.

jaros44sr · 01-23-2007, 08:43 PM

Quote:

Originally Posted by Captkaos

Anyone care to post some close-up pics of Jimmy/Blazer doors so I can see where pickup doors will need to be cut? I would like to see from the window opening up, the whole vent wing, and the rear of the door, and a detail of both areas preferable from the side.

If no one posts up I can do it for you tomorrow night, I have original doors and aftermarket repops. J

krue · 01-23-2007, 09:27 PM

I believe the assembly manual has drawings w/measurements.

LUV2XCLR8 · 01-23-2007, 09:53 PM

bouncytruck · 01-23-2007, 10:23 PM

Yup. Order a factory assembly manual and get the dimensions direct from GM.

**Captkaos** · 01-23-2007, 11:03 PM

well, this is for putting the new one piece glass in a door, and I just need to verify where to cut it. I can get if off a buddies Blazer Sunday, just figured someone may have it...

JimKshortstep4x4 · 01-24-2007, 11:13 AM

Here is a picture of the instructions from the Assembly Manual. I could not find anything on the rear cut but it is pretty straight forward. The rear cut is parallel to the door and is cut 1/8" above the door, (probably for saw blade clearance).

Jim

**Captkaos** · 01-24-2007, 11:23 AM

Is there anyway I could get you to take those individual views and email them to me at webmaster@73-87chevytrucks.com ?
MUCH appreciated!

65-72 chevytoys · 01-24-2007, 01:16 PM

If you can wait until tomorrow, I have it at home bring it to work with tomorrow scan it to PDF and email.

**Captkaos** · 01-24-2007, 01:25 PM

I can wait. Just trying to get a door cut down to test the new 67-72 kits in for the "Blazer" kit.

bouncytruck · 01-24-2007, 01:53 PM

Am I understanding that you are developing a one piece door glass kit for the Blazer? That would be cool if you can get it to work...

**Captkaos** · 01-24-2007, 03:41 PM

Quote:

Originally Posted by bouncytruck

Am I understanding that you are developing a one piece door glass kit for the Blazer? That would be cool if you can get it to work...

That would be correct, I am gathering the info for OPP (company that is selling the 67-72 kit) He thinks it should be availble pending any major issues in March at the earliest.

krue · 01-24-2007, 05:09 PM

wedgemon · 01-24-2007, 07:51 PM

I'd appreciate copies of the PDF scans as well.

- Dave

Pop's72 · 01-24-2007, 07:52 PM

Since we are asking questions...

Would that be a one piece window kit with no triangle of any kind?

**Captkaos** · 01-25-2007, 04:59 PM

Quote:

Originally Posted by Pop's72

Since we are asking questions...

Would that be a one piece window kit with no triangle of any kind?

Yes, it would be this one we are discussing here:
http://67-72chevytrucks.com/vboard/s...d.php?t=223482

65-72 chevytoys · 01-25-2007, 06:03 PM

Here is a pdf of the truck door cut locations for blazers

**Captkaos** · 01-25-2007, 06:12 PM

SWEET!!! Thanks. Now to cut one down...

Jvan · 01-27-2007, 02:55 PM

Would be interested in the one piece window when it happens. Would you post info when available?

**Captkaos** · 01-27-2007, 09:59 PM

I will defintiely post the info when the Blazer option is availible.

**Captkaos** · 02-07-2007, 05:12 PM

Ok, here is the info. I just talked to him today (thanks to 65-72 chevytoys for the PDF). The Blazer/Jimmy kit will be availible at the initial release at the end of this month. It will be an aditional option on top of the standard kit, should be about $60, stayed tuned for final pricing.

BTW, is the cap piece on top of the door availible? (plastic thing that is always broken?)

70gmcjimmy · 02-07-2007, 08:01 PM

Hey Chris,
I just ordered a set of those door caps from Mikes Bump and Grind Garage last weekend so I havent gotten them yet. Definitely the best price on them that I have seen at $35 for the pair.

Later---DAC

gringoloco · 02-08-2007, 12:07 AM

Quote:

Originally Posted by Captkaos

The Blazer/Jimmy kit will be availible at the initial release at the end of this month.

SSSWEEEEEEEEEEEETTT!!!!!

01-23-2007, 07:30 PM	#1
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Request: Pictures of Blazer/Jimmy doors for comparison on where to cut Anyone care to post some close-up pics of Jimmy/Blazer doors so I can see where pickup doors will need to be cut? I would like to see from the window opening up, the whole vent wing, and the rear of the door, and a detail of both areas preferable from the side. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

01-23-2007, 09:27 PM	#3
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut I believe the assembly manual has drawings w/measurements. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

01-23-2007, 09:53 PM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-23-2007, 10:23 PM	#5
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut Yup. Order a factory assembly manual and get the dimensions direct from GM. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

01-23-2007, 11:03 PM	#6
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut well, this is for putting the new one piece glass in a door, and I just need to verify where to cut it. I can get if off a buddies Blazer Sunday, just figured someone may have it... __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

01-24-2007, 11:13 AM	#7
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut Here is a picture of the instructions from the Assembly Manual. I could not find anything on the rear cut but it is pretty straight forward. The rear cut is parallel to the door and is cut 1/8" above the door, (probably for saw blade clearance). Jim Attached Images

01-24-2007, 11:23 AM	#8
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut Is there anyway I could get you to take those individual views and email them to me at webmaster@73-87chevytrucks.com ? MUCH appreciated! __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

01-24-2007, 01:16 PM	#9
65-72 chevytoys Registered User Join Date: Dec 2006 Location: Wesley Chapel, Florida Posts: 1,113	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut If you can wait until tomorrow, I have it at home bring it to work with tomorrow scan it to PDF and email. __________________ 2004 Chevy Silverado 1500LS SWB 5.3L 2004 Corvette Z16 #770 Wish I had not sold 72 blazer

01-24-2007, 01:25 PM	#10
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut I can wait. Just trying to get a door cut down to test the new 67-72 kits in for the "Blazer" kit. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

01-24-2007, 01:53 PM	#11
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut Am I understanding that you are developing a one piece door glass kit for the Blazer? That would be cool if you can get it to work... __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

01-24-2007, 05:09 PM	#13
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

01-24-2007, 07:51 PM	#14
wedgemon Registered User Join Date: Jul 2004 Location: Spanish Springs, NV Posts: 1,171	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut I'd appreciate copies of the PDF scans as well. - Dave __________________ 2003 Silverado K1500 Z71 - Arrival Blue 1973 K5 Cheyenne Blazer 350/TH350/NP203 Kids Trucks:92 K1500 Blazer 5.7/700R4 4" lift. RETIRED: 1980 Scottsdale 4x4 Founding Member: "TILT WHEEL BELLY." Club Last edited by wedgemon; 01-24-2007 at 07:52 PM.

01-24-2007, 07:52 PM	#15
Pop's72 It's ok to stare... Join Date: Dec 2004 Location: San Jose, CA Posts: 669	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut Since we are asking questions... Would that be a one piece window kit with no triangle of any kind? __________________ -Matt 1971 Blazer/Jimmy : Factory 2WD, Factory AC, Crate 350

01-25-2007, 06:12 PM	#18
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut SWEET!!! Thanks. Now to cut one down... __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

01-27-2007, 02:55 PM	#19
Jvan Registered User Join Date: Jan 2007 Location: chappaqua, NY Posts: 43	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut Would be interested in the one piece window when it happens. Would you post info when available?



Register or Log In To remove these advertisements.

01-27-2007, 09:59 PM	#20
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut I will defintiely post the info when the Blazer option is availible. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

02-07-2007, 05:12 PM	#21
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut Ok, here is the info. I just talked to him today (thanks to 65-72 chevytoys for the PDF). The Blazer/Jimmy kit will be availible at the initial release at the end of this month. It will be an aditional option on top of the standard kit, should be about $60, stayed tuned for final pricing. BTW, is the cap piece on top of the door availible? (plastic thing that is always broken?) __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

02-07-2007, 08:01 PM	#22
70gmcjimmy GMCDAC Join Date: Apr 2006 Location: Rapid City, SD Posts: 837	Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut Hey Chris, I just ordered a set of those door caps from Mikes Bump and Grind Garage last weekend so I havent gotten them yet. Definitely the best price on them that I have seen at $35 for the pair. Later---DAC __________________ 1970 GMC K5 Jimmy Custom 4X4 Mom's driver from 1971 to 2001!! Under rebuild! 1972 GMC C2500 Pickup owned since 1979 Needs a rest and refurbish! 1955 GMC 100 2nd design driven almost daily! Rest In Peace Mom. "Dolly" 7/15/23 - 5/18/09 GMC driver for 30 years!

Register or Log In To remove these advertisements.