'67 C20 LWB Rolling Chassis & Long Bed

[The Hard Way]

Ok Guys, I've got a '67 Chevy C20 chassis with trailing arms and an HO52 rear end. I bought the truck to use the cab and front clip, but the cab is pretty rotten, I'm only using some of it. It also has a long bed on it. The bed sides are straight, but there's a bumper on it that extends back to cover the lower portion of the bedsides. The bumper is ugly and it bolts to the bed, so there will be holes in the bed there. I didn't plan on using the long bed, so I didn't give it a really serious looking over, but it looks decent compared to the cab. The bed floor is intact, and it's rusty and dented, but it will hold water, that much I know. No tailgate. The chassis is rusty, but there are no rust holes, it looks to be pitted only. It has brakes (that work) and all of the steering components on it, but I will be removing the steering column as well as the rear panel of the cab to use as a patch for my new cab. The rest of the cab has been almost totally stripped and it's not pretty. Both rockers are nasty and the header panel is badly rusted. It's a small window, and the dash has been cut at the radio opening. That's the bad part. The chassis is located in Lake Forest, CA, and I can help you load it on a trailer after work during the week M-Th. It's free. That's the good part.