Paint job on the CHEAP!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dave2953 · 09-30-2007, 08:04 PM

$25 to be exact. I got tired of my truck looking like Fido's backside, so I figured it was time for a change. Not a professional job by any stretch of the imagination, but I think it's much improved. My fiance did a lot of the work. (She's a lot better at painting than I am

) Here's a before and after:

CG · 09-30-2007, 08:27 PM

No shot of the fiance doing the painting?

Btw, I like your truck both ways.

**Palf70Step** · 09-30-2007, 08:32 PM

BHRS · 09-30-2007, 08:38 PM

Looks Good!!!

Hot Rod did an article a few months back showing how to "roll" Rustoleum on an old Falcon. It was pretty interesting how they did it. It took several coats, some wet sanding, and some buffing. I think they did it for less than $100.00.

SacramentoJoe · 09-30-2007, 09:04 PM

I like the matching emblem.

dave2953 · 09-30-2007, 09:05 PM

Here you go CG. It was after we were done, but it's close enough. She also painted a lot of the front end parts when I did the disc conversion.

**jerry moss** · 09-30-2007, 09:48 PM

that last pic looks much better

72armyswbtruck · 09-30-2007, 10:15 PM

cool lookin paint job

68gmsee · 09-30-2007, 11:04 PM

Amazing how much nicer that truck looks on that last pic...

Good job...

ABN82MP · 09-30-2007, 11:07 PM

Quote:

Originally Posted by BHRS

Looks Good!!!

Hot Rod did an article a few months back showing how to "roll" Rustoleum on an old Falcon. It was pretty interesting how they did it. It took several coats, some wet sanding, and some buffing. I think they did it for less than $100.00.

http://board.moparts.org/ubbthreads/...t=1&PHPSESSID=

71big block · 09-30-2007, 11:10 PM

What truck?

Jerry Jones · 09-30-2007, 11:34 PM

Gongrats on both! Ya done good!

Premium72 · 10-01-2007, 08:39 AM

damn i woulda left it the orangeish color. i wish i wouldhave never painted mine. nice work.

shifty · 10-01-2007, 04:05 PM

not bad, but woulda looked a hundred times better if you'da taped off/taken off the gas cap and C10 badge!

68GMCCustom · 10-01-2007, 04:31 PM

67_C-30 · 10-01-2007, 05:03 PM

Looks great! How much of a drop are you running?

dave2953 · 10-01-2007, 10:34 PM

Quote:

Originally Posted by 67_C-30

Looks great! How much of a drop are you running?

I have 1 coil cut from the front and a 5" drop spring in the rear.

Shifty, the gas cap was pretty much trashed so I just painted over it, and the badges have screws run through them and are pretty much hosed as a result. I plan to replace them eventually.

Morgsie · 10-01-2007, 10:52 PM

I personally would have left it orange, maybe got some orange paint and blended it (or just left it). Blotchy flat black looks like:

CG · 10-02-2007, 12:44 AM

Quote:

Originally Posted by dave2953

Here you go CG. It was after we were done, but it's close enough. She also painted a lot of the front end parts when I did the disc conversion.

Wooot!! You have a lady that helps you with your ride...you have a keeper.

shifty · 10-02-2007, 10:24 AM

Quote:

Originally Posted by dave2953

Shifty, the gas cap was pretty much trashed so I just painted over it, and the badges have screws run through them and are pretty much hosed as a result. I plan to replace them eventually.

New, chrome gas cap is $6 at NAPA auto parts.

Badges can probably be had for $10/ea in the classifieds. or send a PM to user uncle or PICKMUP and see if they have something.

$25 to make your ride look ten times better!!

09-30-2007, 08:04 PM	#1
dave2953 Dave's not here, man Join Date: Jun 2004 Location: Winder, Georgia Posts: 2,000	Paint job on the CHEAP!! $25 to be exact. I got tired of my truck looking like Fido's backside, so I figured it was time for a change. Not a professional job by any stretch of the imagination, but I think it's much improved. My fiance did a lot of the work. (She's a lot better at painting than I am ) Here's a before and after: __________________ - 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250 Last edited by dave2953; 09-30-2007 at 08:13 PM.

09-30-2007, 08:27 PM	#2
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,131	Re: Paint job on the CHEAP!! No shot of the fiance doing the painting? Btw, I like your truck both ways. Last edited by CG; 09-30-2007 at 08:27 PM.

09-30-2007, 08:32 PM	#3
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,468	Re: Paint job on the CHEAP!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

09-30-2007, 08:38 PM	#4
BHRS Registered User Join Date: Sep 2007 Location: Wylie TEXAS Posts: 81	Re: Paint job on the CHEAP!! Looks Good!!! Hot Rod did an article a few months back showing how to "roll" Rustoleum on an old Falcon. It was pretty interesting how they did it. It took several coats, some wet sanding, and some buffing. I think they did it for less than $100.00. __________________ 1972 Cheyenne C10 Unrestored Original-3 Owner-RUST FREE Texas Truck Big Block-TH400-PS-PB-AC-AM/FM Radio

09-30-2007, 09:04 PM	#5
SacramentoJoe Always Fixing Things Join Date: Mar 2007 Location: Roseville, CA Posts: 390	Re: Paint job on the CHEAP!! I like the matching emblem. __________________ Just an Average Joe ‘68 GMC 307 3spd – My dad's original truck 310,000 miles

09-30-2007, 09:05 PM	#6
dave2953 Dave's not here, man Join Date: Jun 2004 Location: Winder, Georgia Posts: 2,000	Re: Paint job on the CHEAP!! Here you go CG. It was after we were done, but it's close enough. She also painted a lot of the front end parts when I did the disc conversion. __________________ - 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250

09-30-2007, 09:48 PM	#7
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,959	Re: Paint job on the CHEAP!! that last pic looks much better __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

09-30-2007, 10:15 PM	#8
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: Paint job on the CHEAP!! cool lookin paint job __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

09-30-2007, 11:04 PM	#9
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: Paint job on the CHEAP!! Amazing how much nicer that truck looks on that last pic... Good job...

09-30-2007, 11:10 PM	#11
71big block 1971 GMC 3/4 ton, 572 CID Join Date: Aug 2007 Location: Green Bay, WI Posts: 293	Re: Paint job on the CHEAP!! What truck? __________________ 71 GMC 3/4 572 CID, 1988 GMC 1/2 2006 Saturn Vue "We always have parts left over on a job this size"

09-30-2007, 11:34 PM	#12
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: Paint job on the CHEAP!! Gongrats on both! Ya done good! __________________ RIP El Jay! Love you brother!

10-01-2007, 08:39 AM	#13
Premium72 Registered User Join Date: Sep 2005 Location: Villa Rica Ga Posts: 889	Re: Paint job on the CHEAP!! damn i woulda left it the orangeish color. i wish i wouldhave never painted mine. nice work. __________________ WombatFire, Art-Design-MADNESS Follow My Build and Adventures on Instagram

10-01-2007, 04:05 PM	#14
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Paint job on the CHEAP!! not bad, but woulda looked a hundred times better if you'da taped off/taken off the gas cap and C10 badge! __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

10-01-2007, 04:31 PM	#15
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Paint job on the CHEAP!! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

10-01-2007, 05:03 PM	#16
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Paint job on the CHEAP!! Looks great! How much of a drop are you running? __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!



Register or Log In To remove these advertisements.

10-01-2007, 10:52 PM	#18
Morgsie Registered User Join Date: Apr 2005 Location: BC, Canada Posts: 122	Re: Paint job on the CHEAP!! I personally would have left it orange, maybe got some orange paint and blended it (or just left it). Blotchy flat black looks like:

Register or Log In To remove these advertisements.