1SIK69 build.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1SIK69 · 02-28-2009, 11:46 AM

Ok I started this a few weeks ago. It is coming along slowly but surely. Between work and waiting on parts and the weather. I have a deadline of 18 March to get it on the road for Tex Mex in Somerville,Tx. Here are some pics of what I have so far.

1SIK69 · 02-28-2009, 11:49 AM

Here is some bad I pulled the windshield and glass yesterday and found some cancer. The area around the bad window is pretty much immaculate. I don't think it is too bad for a 40 year old truck.

1SIK69 · 02-28-2009, 11:50 AM

Here is a pic of some of the stuff that is getting installed soon.

1SIK69 · 02-28-2009, 11:54 AM

Some of my plans are 22's laying rockers. Repaint the motor with all that billet. Smooth firewall. Leather buckets and console. Raise bed floor above notches so I dont have to cut the floor. Calicombo with LEDs in the roll pan. Frenched in tag bucket. Phantom billet grill, tilt hood, 4 inch chop top, Eventually tubular control arms and Z the frame.

bigguy69 · 02-28-2009, 01:58 PM

man that thing is coming along good

STOCKISH · 02-28-2009, 03:51 PM

Looks good, we are definately going to need more pics.

Spray-Bomb · 02-28-2009, 07:58 PM

Sweet, I like those wheels

1SIK69 · 02-28-2009, 08:08 PM

Well today I got the 5 lug stuff bolted up in the front. When I cut the fender the wheels are gonna tuck nice. I am running drop spindles and cut lowers, I think I still have a lot of travel before the control arms bottom out.

1SIK69 · 02-28-2009, 08:09 PM

Thanks for the comments guys. I am liking those wheels more and more. I may get some 22's like'em.

1SIK69 · 03-01-2009, 10:07 PM

Ok here is what I got done today. Me and my buddy pulled the front end off and yanked out the motor and tranny for some fresh paint and new seals on the tranny. I took some pics without jack stands to see how she was gonna lay out. What do yall think? I know the firewall looks nasty. I am gonna smooth her out before I install the motor and tranny.

nuke1 · 03-02-2009, 02:45 AM

wow, those are some SIK rims you have there, and a pretty fast deadline coming up also. i like the plans for the truck so far, great ride height and bling. I definelty want to see if you get your goal met, i hope you do, just so you can show that ride off.

*1sik52* · 03-02-2009, 03:05 AM

I will be at TexMex. Maybe I will see you there

1SIK69 · 03-02-2009, 11:41 PM

Did not do much to it today except started stripping the candy red paint off the motor. Grrrrrrr. I am looking for a Edelbrock intake and carb before I drop the motor back in. I have like less than 3 weeks to finish this damn thing.

LuckyHenriksen · 03-02-2009, 11:45 PM

Looks good. Im glad you want to raise the bed to cover the notches, that looks alot better IMO

1SIK69 · 03-02-2009, 11:49 PM

Quote:

Originally Posted by LuckyHenriksen

Looks good. Im glad you want to raise the bed to cover the notches, that looks alot better IMO

Thanks bro. Still trying to figure out how much room I am gonna have for the fuel cell. I don't want it sticking out over the bed rails. I guess I will see when the time comes to put the bed on. I may have to recess the fuel cell in the bed. I hope not though. We will see.

1SIK69 · 03-03-2009, 06:56 AM

Quote:

Originally Posted by 1sik52

I will be at TexMex. Maybe I will see you there

Quote:

Originally Posted by nuke1

wow, those are some SIK rims you have there, and a pretty fast deadline coming up also. i like the plans for the truck so far, great ride height and bling. I definelty want to see if you get your goal met, i hope you do, just so you can show that ride off.

Thanks guys, It is a little over whelming but I start leave tomorrow so I think I can get it done. It will be some some long hours and late nights but I am used to that. I did the same thing last year on an S-10 that I bagged.

1SIK69 · 03-03-2009, 06:58 AM

Quote:

Originally Posted by 1sik52

I will be at TexMex. Maybe I will see you there

Hey look for me. Hopefully the 69 will be all flat black and look for our banner with Draggin Ass Customs. Come say whats up or something. My name is Monty btw.

1SIK69 · 03-04-2009, 10:27 PM

Ok this is what I have been working on the past few days. Got the motor cleaned up and paint and the tranny got new seals and a new kick down cable. Still gotta get the water pump painted and PS pump and pullies. Another day gone.

my67chevytruck · 03-05-2009, 05:06 PM

keep at it...

1SIK69 · 03-05-2009, 05:57 PM

Got anm Edelbrock intake, carb and some aluminum pullies today. I will post up some pics once I get it all together

STOCKISH · 03-05-2009, 09:00 PM

Looking good

BIG HEAD · 03-05-2009, 10:41 PM

Are you staying with the stock rear trailing arms?

1SIK69 · 03-06-2009, 09:22 AM

Quote:

Originally Posted by BIG HEAD

Are you staying with the stock rear trailing arms?

No, I got a heavy duty unversal triangulated 4 link from *****************.
I am gonna get them welded in hopefully today and I will post some pics.

64shortc10 · 03-06-2009, 05:35 PM

Truck is lookin good! Where did you get the notch and what size is it?
Tony from Norcal

1SIK69 · 03-06-2009, 09:23 PM

Quote:

Originally Posted by 64shortc10

Truck is lookin good! Where did you get the notch and what size is it?
Tony from Norcal

Thanks bro, I appreciate it.
I got it from ***************** and I haven't measured it but I think it is like a 8-10 inch notch. They call it a monster notch.

02-28-2009, 11:46 AM	#1
1SIK69 Registered User Join Date: Feb 2009 Location: Killeen, TX Posts: 55	1SIK69 build.... Ok I started this a few weeks ago. It is coming along slowly but surely. Between work and waiting on parts and the weather. I have a deadline of 18 March to get it on the road for Tex Mex in Somerville,Tx. Here are some pics of what I have so far.

02-28-2009, 11:49 AM	#2
1SIK69 Registered User Join Date: Feb 2009 Location: Killeen, TX Posts: 55	Re: 1SIK69 build.... Here is some bad I pulled the windshield and glass yesterday and found some cancer. The area around the bad window is pretty much immaculate. I don't think it is too bad for a 40 year old truck.

02-28-2009, 11:50 AM	#3
1SIK69 Registered User Join Date: Feb 2009 Location: Killeen, TX Posts: 55	Re: 1SIK69 build.... Here is a pic of some of the stuff that is getting installed soon.

02-28-2009, 11:54 AM	#4
1SIK69 Registered User Join Date: Feb 2009 Location: Killeen, TX Posts: 55	Re: 1SIK69 build.... Some of my plans are 22's laying rockers. Repaint the motor with all that billet. Smooth firewall. Leather buckets and console. Raise bed floor above notches so I dont have to cut the floor. Calicombo with LEDs in the roll pan. Frenched in tag bucket. Phantom billet grill, tilt hood, 4 inch chop top, Eventually tubular control arms and Z the frame.

02-28-2009, 01:58 PM	#5
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: 1SIK69 build.... man that thing is coming along good __________________ members met: redbaron69, billsbowtie,nc67

02-28-2009, 03:51 PM	#6
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 1SIK69 build.... Looks good, we are definately going to need more pics. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-28-2009, 07:58 PM	#7
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: 1SIK69 build.... Sweet, I like those wheels __________________ Just not low enough... ----------------------------- Sinister Killer

02-28-2009, 08:08 PM	#8
1SIK69 Registered User Join Date: Feb 2009 Location: Killeen, TX Posts: 55	Re: 1SIK69 build.... Well today I got the 5 lug stuff bolted up in the front. When I cut the fender the wheels are gonna tuck nice. I am running drop spindles and cut lowers, I think I still have a lot of travel before the control arms bottom out.

02-28-2009, 08:09 PM	#9
1SIK69 Registered User Join Date: Feb 2009 Location: Killeen, TX Posts: 55	Re: 1SIK69 build.... Thanks for the comments guys. I am liking those wheels more and more. I may get some 22's like'em.

03-01-2009, 10:07 PM	#10
1SIK69 Registered User Join Date: Feb 2009 Location: Killeen, TX Posts: 55	Re: 1SIK69 build.... Ok here is what I got done today. Me and my buddy pulled the front end off and yanked out the motor and tranny for some fresh paint and new seals on the tranny. I took some pics without jack stands to see how she was gonna lay out. What do yall think? I know the firewall looks nasty. I am gonna smooth her out before I install the motor and tranny.

03-02-2009, 02:45 AM	#11
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: 1SIK69 build.... wow, those are some SIK rims you have there, and a pretty fast deadline coming up also. i like the plans for the truck so far, great ride height and bling. I definelty want to see if you get your goal met, i hope you do, just so you can show that ride off. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

03-02-2009, 03:05 AM	#12
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: 1SIK69 build.... I will be at TexMex. Maybe I will see you there

03-02-2009, 11:41 PM	#13
1SIK69 Registered User Join Date: Feb 2009 Location: Killeen, TX Posts: 55	Re: 1SIK69 build.... Did not do much to it today except started stripping the candy red paint off the motor. Grrrrrrr. I am looking for a Edelbrock intake and carb before I drop the motor back in. I have like less than 3 weeks to finish this damn thing.

03-02-2009, 11:45 PM	#14
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: 1SIK69 build.... Looks good. Im glad you want to raise the bed to cover the notches, that looks alot better IMO __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

03-04-2009, 10:27 PM	#18
1SIK69 Registered User Join Date: Feb 2009 Location: Killeen, TX Posts: 55	Re: 1SIK69 build.... Ok this is what I have been working on the past few days. Got the motor cleaned up and paint and the tranny got new seals and a new kick down cable. Still gotta get the water pump painted and PS pump and pullies. Another day gone.



Register or Log In To remove these advertisements.

03-05-2009, 05:06 PM	#19
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 1SIK69 build.... keep at it... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

03-05-2009, 05:57 PM	#20
1SIK69 Registered User Join Date: Feb 2009 Location: Killeen, TX Posts: 55	Re: 1SIK69 build.... Got anm Edelbrock intake, carb and some aluminum pullies today. I will post up some pics once I get it all together

03-05-2009, 09:00 PM	#21
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 1SIK69 build.... Looking good __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-05-2009, 10:41 PM	#22
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: 1SIK69 build.... Are you staying with the stock rear trailing arms? __________________ MY POND TRUCK BUILD http://www.67-72chevytrucks.com/vboa...d.php?t=297393

03-06-2009, 05:35 PM	#24
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: 1SIK69 build.... Truck is lookin good! Where did you get the notch and what size is it? Tony from Norcal

Register or Log In To remove these advertisements.