new info on the drop spindles vs control arms thread - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dropt72Shortbed · 12-01-2002, 02:59 PM

i emailed DJM to ask them about their lower arms and if they maintained stock geometry. this was the reply..

Subj: Re: question about dropped lower arms for 72 chevy c-10
Date: 11/26/2002 7:27:44 AM Pacific Standard Time
From: djm@dslextreme.com
To: Dropt72shortbed@aol.com
Sent from the Internet (Details)

Hi,
The spindle remains in the same position. The upper arm is now angeled upward to allow your truck to lower

12-01-2002, 02:59 PM	#1
Dropt72Shortbed Registered User Join Date: May 2002 Location: Huntington Beach CA Posts: 678	new info on the drop spindles vs control arms thread i emailed DJM to ask them about their lower arms and if they maintained stock geometry. this was the reply.. Subj: Re: question about dropped lower arms for 72 chevy c-10 Date: 11/26/2002 7:27:44 AM Pacific Standard Time From: djm@dslextreme.com To: Dropt72shortbed@aol.com Sent from the Internet (Details) Hi, The spindle remains in the same position. The upper arm is now angeled upward to allow your truck to lower



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.