Some stuff for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Redden05 · 11-10-2008, 05:59 PM

I have some things I want to get rid of.

1. A set of 6 cylinder 2WD motor mount stands: $10 plus shipping

2. A Edelbrock Intake for 86 and older SBC V8 that has been drilled to fit on newer small blocks. It also has a bolt broken off in it where the alternater bracket bolts on: SOLD

3. A 6 cylinder 3 speed manual tranny with the bellhousing and starter. This is the older kind with the mounts on the bellhousing. I also think the bellhousing is for a 4 speed manual as the hole where the shaft comes through is too big for the transmission. It worked nice when I took it out. Make me an offer. I dont want to ship this, but if you want the bellhousing and starter, I will take them off and sell them seperate. And I will ship the bellhousing/starter.

I will add more stuff as I find it.

Redden05 · 11-10-2008, 06:31 PM

4. I have a inside wiring harness from a 6 cylinder truck without gauges. There are no wires cut, but the ignition plug has come apart. It also includes the engine harness in the engine bay, that has been cut. And also the harness that goes across the radiator support: $30 plus shipping

5. 1971 5 lug axles out of a coil spring truck. It is the axles only in very good shape: $40 plus shipping

6. A complete TBI setup with wires, throttle body, all sensors, intake, and anything else I thought was related to it. It was an 1987 C10 2WD 350 V8 700R4 transmission: $200 plus shipping.

I will get pictures if you request them. Thanks.

zooza1 · 11-10-2008, 06:35 PM

put me in line for the intake... pending pictures send them to tomcat_37096@yahoo.com or post here

Redden05 · 11-10-2008, 09:07 PM

If the prices are too high, make an offer.

7. I also have a nice spare tire holder. It comes with the screw part which is bent and needs straightened. See the pictures. $30 plus shipping.

Redden05 · 11-10-2008, 09:13 PM

more pics:

I also found the other harness piece that goes to the firewall around the front to the battery and alternator. I will throw it in with the rest.

zooza1 · 11-10-2008, 11:26 PM

i'll take the intake if shipping isnt crazy! its to 37096 linden, tn. do you take paypal?

Redden05 · 11-11-2008, 07:26 PM

I will have to get a wieght on the intake before I get a quote. I will do it tomorrow morning. Yes I take Paypal.

zooza1 · 11-11-2008, 09:48 PM

thanks i'm being patient no prob!

Redden05 · 11-12-2008, 12:07 PM

It will be $15 to ship it to you zooza1 through FedEx.

Redden05 · 11-12-2008, 02:28 PM

I was just looking at the Intake and one of the holes where it has been drilled out (you can see it in the 2nd picture) it is cracked. It will not hurt the operation of the intake, i just wanted to let you know.

Redden05 · 11-13-2008, 04:42 PM

Intake is sold to zooza1.

Redden05 · 11-14-2008, 05:12 PM

ttt

Redden05 · 11-17-2008, 05:26 PM

bump

Redden05 · 11-19-2008, 01:09 PM

bump

Redden05 · 11-20-2008, 08:46 PM

make an offer!

rob32472 · 11-20-2008, 08:49 PM

what is the length of the axiles? I want them if they are right length

Redden05 · 11-20-2008, 10:47 PM

I will measure them tomorrow. Where do you want them measured from? Or just a total overall length?

Redden05 · 11-21-2008, 07:23 PM

rob: PM sent

Redden05 · 11-24-2008, 08:14 PM

ttt

Redden05 · 11-27-2008, 06:07 PM

bump

Redden05 · 11-29-2008, 08:08 PM

I will throw in, with the wiring harness, the wire harness that goes from the front to the rear of the truck for a shortbed. It has not been cut, it was just painted red.

Redden05 · 12-01-2008, 10:07 PM

bump

Redden05 · 12-04-2008, 08:34 PM

ttt

Redden05 · 12-10-2008, 07:08 PM

bump

Redden05 · 12-12-2008, 07:12 PM

ttt

11-10-2008, 05:59 PM	#1
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Some stuff for sale I have some things I want to get rid of. 1. A set of 6 cylinder 2WD motor mount stands: $10 plus shipping 2. A Edelbrock Intake for 86 and older SBC V8 that has been drilled to fit on newer small blocks. It also has a bolt broken off in it where the alternater bracket bolts on: SOLD 3. A 6 cylinder 3 speed manual tranny with the bellhousing and starter. This is the older kind with the mounts on the bellhousing. I also think the bellhousing is for a 4 speed manual as the hole where the shaft comes through is too big for the transmission. It worked nice when I took it out. Make me an offer. I dont want to ship this, but if you want the bellhousing and starter, I will take them off and sell them seperate. And I will ship the bellhousing/starter. I will add more stuff as I find it. Last edited by Redden05; 11-29-2008 at 08:02 PM.

11-10-2008, 06:31 PM	#2
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale 4. I have a inside wiring harness from a 6 cylinder truck without gauges. There are no wires cut, but the ignition plug has come apart. It also includes the engine harness in the engine bay, that has been cut. And also the harness that goes across the radiator support: $30 plus shipping 5. 1971 5 lug axles out of a coil spring truck. It is the axles only in very good shape: $40 plus shipping 6. A complete TBI setup with wires, throttle body, all sensors, intake, and anything else I thought was related to it. It was an 1987 C10 2WD 350 V8 700R4 transmission: $200 plus shipping. I will get pictures if you request them. Thanks. Last edited by Redden05; 11-29-2008 at 08:00 PM.

11-10-2008, 06:35 PM	#3
zooza1 Registered User Join Date: Sep 2004 Location: Linden, Tn. Posts: 232	Re: Some stuff for sale put me in line for the intake... pending pictures send them to tomcat_37096@yahoo.com or post here

11-10-2008, 09:07 PM	#4
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale If the prices are too high, make an offer. 7. I also have a nice spare tire holder. It comes with the screw part which is bent and needs straightened. See the pictures. $30 plus shipping. Last edited by Redden05; 01-13-2009 at 07:48 PM.

11-10-2008, 09:13 PM	#5
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale more pics: I also found the other harness piece that goes to the firewall around the front to the battery and alternator. I will throw it in with the rest. Last edited by Redden05; 11-29-2008 at 08:02 PM.

11-10-2008, 11:26 PM	#6
zooza1 Registered User Join Date: Sep 2004 Location: Linden, Tn. Posts: 232	Re: Some stuff for sale i'll take the intake if shipping isnt crazy! its to 37096 linden, tn. do you take paypal?

11-11-2008, 07:26 PM	#7
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale I will have to get a wieght on the intake before I get a quote. I will do it tomorrow morning. Yes I take Paypal.

11-11-2008, 09:48 PM	#8
zooza1 Registered User Join Date: Sep 2004 Location: Linden, Tn. Posts: 232	Re: Some stuff for sale thanks i'm being patient no prob!

11-12-2008, 12:07 PM	#9
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale It will be $15 to ship it to you zooza1 through FedEx.

11-12-2008, 02:28 PM	#10
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale I was just looking at the Intake and one of the holes where it has been drilled out (you can see it in the 2nd picture) it is cracked. It will not hurt the operation of the intake, i just wanted to let you know.

11-13-2008, 04:42 PM	#11
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale Intake is sold to zooza1. Last edited by Redden05; 11-21-2008 at 07:24 PM.

11-14-2008, 05:12 PM	#12
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale ttt

11-17-2008, 05:26 PM	#13
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale bump

11-19-2008, 01:09 PM	#14
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale bump

11-20-2008, 08:46 PM	#15
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale make an offer!



Register or Log In To remove these advertisements.

11-20-2008, 08:49 PM	#16
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: Some stuff for sale what is the length of the axiles? I want them if they are right length

11-20-2008, 10:47 PM	#17
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale I will measure them tomorrow. Where do you want them measured from? Or just a total overall length?

11-21-2008, 07:23 PM	#18
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale rob: PM sent

11-24-2008, 08:14 PM	#19
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale ttt

11-27-2008, 06:07 PM	#20
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale bump

11-29-2008, 08:08 PM	#21
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale I will throw in, with the wiring harness, the wire harness that goes from the front to the rear of the truck for a shortbed. It has not been cut, it was just painted red.

12-01-2008, 10:07 PM	#22
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale bump

12-04-2008, 08:34 PM	#23
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale ttt

12-10-2008, 07:08 PM	#24
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale bump

12-12-2008, 07:12 PM	#25
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Some stuff for sale ttt

Register or Log In To remove these advertisements.