shortening A-Arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mexgrhd68 · 04-29-2009, 04:42 PM

i have a 1979 GMC 1/2 ton, running 15x10 inch enkies all around. tire rubs a little on fenders, has anyone ever shortened a-arms to cure this problem? or can it be done?

Captkaos · 04-29-2009, 09:03 PM

That isn't the solution. You will change the geometry of the suspension doing that. You have too little backspacing for the front. I am guessing 3.5 or 3.75" and with a 10" wheel there is no way to keep it from rubbing.

smashingchuck · 04-30-2009, 11:46 AM

bad idea.

Malo83 · 04-30-2009, 02:42 PM

Quote:

Originally Posted by mexgrhd68

i have a 1979 GMC 1/2 ton, running 15x10 inch enkies all around. tire rubs a little on fenders, has anyone ever shortened a-arms to cure this problem? or can it be done?

That's the way it used to be done back in the day, guy by the name of McCoy down in SoCal, had a shop called the Drop Shop and they would section the lower A-arm's by removing a strip of metal near the ball joint and reweld it back, this worked in conjucntion with cutting the coils to get your drop and keep the alignment specs within, this was before they came out with drop coils and lowering Aarms for our trucks.

Captkaos · 04-30-2009, 04:28 PM

No, the Drop Shop didn't shorten them, they raised the balljoint up, basically lowering the spring pocket, I did the same thing to mine... In 1988.....

04-29-2009, 04:42 PM	#1
mexgrhd68 Registered User Join Date: Apr 2007 Location: Visalia, CA. Posts: 327	shortening A-Arms i have a 1979 GMC 1/2 ton, running 15x10 inch enkies all around. tire rubs a little on fenders, has anyone ever shortened a-arms to cure this problem? or can it be done? __________________ 68 c-10 1/2 ton swb fleetside, 79 GMC Sierra Grande 1/2 ton swb fleetside, 99 Dodge Durango 4x4(wifes ride),53 and 55 chevy trucks(dads trucks ) 54 caddy 62 series 4 door(younger sons ride, aka 54caddy ) 70 caddy 2 door, 89 chevy silverado stepside(older sons rides )

04-29-2009, 09:03 PM	#2
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: shortening A-Arms That isn't the solution. You will change the geometry of the suspension doing that. You have too little backspacing for the front. I am guessing 3.5 or 3.75" and with a 10" wheel there is no way to keep it from rubbing. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

04-30-2009, 11:46 AM	#3
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: shortening A-Arms bad idea. __________________ 78 Build Thread 4Runner Build

04-30-2009, 04:28 PM	#5
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: shortening A-Arms No, the Drop Shop didn't shorten them, they raised the balljoint up, basically lowering the spring pocket, I did the same thing to mine... In 1988..... __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.