swb wide bed f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 06-27-2009, 04:27 PM

this is a good soild bed very little rust mostly surface. floor is perty straight cross seals are good as well. pass. side ft. had a dent i have gotton most of it out but it got to hot to work on it. the bottom same side under dent needs pulled back out a little. this bed is not full of bondo. wheel arches are soild. $650.00 without tailgate or if you need one i have a couple to choose from $50 to $150.00. you can also see a good swb 72 frame set up for sb eng auto trans. and auto rear end $500.00.

billsbowtie · 06-27-2009, 04:28 PM

billsbowtie · 06-27-2009, 04:29 PM

billsbowtie · 06-27-2009, 04:31 PM

billsbowtie · 06-27-2009, 04:32 PM

billsbowtie · 06-27-2009, 04:33 PM

billsbowtie · 06-27-2009, 04:34 PM

billsbowtie · 06-27-2009, 04:36 PM

billsbowtie · 06-27-2009, 04:37 PM

heres a few pic.s of the frame.

billsbowtie · 06-27-2009, 04:38 PM

billsbowtie · 06-27-2009, 04:38 PM

billsbowtie · 06-27-2009, 04:39 PM

billsbowtie · 06-27-2009, 04:39 PM

mas09ts · 06-27-2009, 10:23 PM

Hey Bill how much would you take for the power steering setup? I can pick it up.

billsbowtie · 06-28-2009, 01:03 AM

i have a power steering set up on another truck that i will sale when some of the bigger parts sale frist. pump with brackets and hoses and steering box $100.00 for all. or if i run across another one before i will give you frist chance at it.

Bishops Trucks · 06-28-2009, 01:43 AM

Oh man i need that bed. I know I asked you this before on another post but how far is Rosehill from Manassas.

billsbowtie · 06-28-2009, 01:55 AM

i am not sure where you are but i am about 4 to 450 miles from richman if that helps any. my zip code is 24281.

mas09ts · 06-28-2009, 10:44 AM

Quote:

Originally Posted by billsbowtie

i have a power steering set up on another truck that i will sale when some of the bigger parts sale frist. pump with brackets and hoses and steering box $100.00 for all. or if i run across another one before i will give you frist chance at it.

okay Bill, I could come and get it Monday or Tuesday if you got it. But another time is fine.

mas09ts · 06-28-2009, 11:15 AM

Also Bill you got any pics of that setup.

Bishops Trucks · 06-28-2009, 11:54 AM

Quote:

Originally Posted by billsbowtie

i am not sure where you are but i am about 4 to 450 miles from richman if that helps any. my zip code is 24281.

Sorry, should have said Manassas, Va. I'm 2 hours north of Richmond. Thats a long haul to Rosehill.

*c10_1971* · 06-28-2009, 06:14 PM

possibly interested if you would consider trading, I have an NOS fleetside tailgate to trade with.

billsbowtie · 06-29-2009, 02:23 AM

c10 1971 i send you and email about how much you want for the tailgate.

*c10_1971* · 06-29-2009, 11:12 PM

looking to get $650 for the gate, if you are not interested and you know anyone that would be in the gate send them my way

billsbowtie · 06-30-2009, 12:02 AM

ok i will pass on it i could use the money out of the bed right now.

*c10_1971* · 06-30-2009, 10:35 PM

Bill found a bed down here I would like to buy will take $450 for it if that helps.

06-27-2009, 04:27 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	swb wide bed f/s this is a good soild bed very little rust mostly surface. floor is perty straight cross seals are good as well. pass. side ft. had a dent i have gotton most of it out but it got to hot to work on it. the bottom same side under dent needs pulled back out a little. this bed is not full of bondo. wheel arches are soild. $650.00 without tailgate or if you need one i have a couple to choose from $50 to $150.00. you can also see a good swb 72 frame set up for sb eng auto trans. and auto rear end $500.00. __________________ i have 67/72 chevy truck parts f/s.

06-27-2009, 04:28 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s __________________ i have 67/72 chevy truck parts f/s.

06-27-2009, 04:29 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s __________________ i have 67/72 chevy truck parts f/s.

06-27-2009, 04:31 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s __________________ i have 67/72 chevy truck parts f/s.

06-27-2009, 04:32 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s __________________ i have 67/72 chevy truck parts f/s.

06-27-2009, 04:33 PM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s __________________ i have 67/72 chevy truck parts f/s.

06-27-2009, 04:34 PM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s __________________ i have 67/72 chevy truck parts f/s.

06-27-2009, 04:36 PM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s __________________ i have 67/72 chevy truck parts f/s.

06-27-2009, 04:37 PM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s heres a few pic.s of the frame. __________________ i have 67/72 chevy truck parts f/s.

06-27-2009, 04:38 PM	#10
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s __________________ i have 67/72 chevy truck parts f/s.

06-27-2009, 04:39 PM	#12
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s __________________ i have 67/72 chevy truck parts f/s.

06-27-2009, 10:23 PM	#14
mas09ts Registered User Join Date: Jul 2008 Location: Gate City VA Posts: 576	Re: swb wide bed f/s Hey Bill how much would you take for the power steering setup? I can pick it up. __________________ Mitch 22yrs. Young 1970 GMC Short-Step 350/TH350 Combo. . . . Sold Dec 2011 Current Project 68 Gmc "Second Chance" Go to my 68 GMC Shorty Rebuild Thread http://67-72chevytrucks.com/vboard/s...39#post6341739 Last edited by mas09ts; 06-27-2009 at 10:25 PM.

06-28-2009, 01:03 AM	#15
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s i have a power steering set up on another truck that i will sale when some of the bigger parts sale frist. pump with brackets and hoses and steering box $100.00 for all. or if i run across another one before i will give you frist chance at it. __________________ i have 67/72 chevy truck parts f/s.

06-28-2009, 01:43 AM	#16
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: swb wide bed f/s Oh man i need that bed. I know I asked you this before on another post but how far is Rosehill from Manassas. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

06-28-2009, 01:55 AM	#17
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s i am not sure where you are but i am about 4 to 450 miles from richman if that helps any. my zip code is 24281. __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

06-28-2009, 11:15 AM	#19
mas09ts Registered User Join Date: Jul 2008 Location: Gate City VA Posts: 576	Re: swb wide bed f/s Also Bill you got any pics of that setup. __________________ Mitch 22yrs. Young 1970 GMC Short-Step 350/TH350 Combo. . . . Sold Dec 2011 Current Project 68 Gmc "Second Chance" Go to my 68 GMC Shorty Rebuild Thread http://67-72chevytrucks.com/vboard/s...39#post6341739

06-28-2009, 06:14 PM	#21
c10_1971 Account Suspended Join Date: May 2009 Location: Asheville, NC Posts: 75	Re: swb wide bed f/s possibly interested if you would consider trading, I have an NOS fleetside tailgate to trade with.

06-29-2009, 02:23 AM	#22
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s c10 1971 i send you and email about how much you want for the tailgate. __________________ i have 67/72 chevy truck parts f/s.

06-29-2009, 11:12 PM	#23
c10_1971 Account Suspended Join Date: May 2009 Location: Asheville, NC Posts: 75	Re: swb wide bed f/s looking to get $650 for the gate, if you are not interested and you know anyone that would be in the gate send them my way

06-30-2009, 12:02 AM	#24
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s ok i will pass on it i could use the money out of the bed right now. __________________ i have 67/72 chevy truck parts f/s.

06-30-2009, 10:35 PM	#25
c10_1971 Account Suspended Join Date: May 2009 Location: Asheville, NC Posts: 75	Re: swb wide bed f/s Bill found a bed down here I would like to buy will take $450 for it if that helps.

Register or Log In To remove these advertisements.