GA WTB Dual Tank Harness

[lo72]

I need a dual tank NON fuel injected wiring harness to use on a 85 Silverado. Thanks Greg

[RandyP]

Switch back? Or how much to where? I think our 84 parts truck still has the dual tank harness. I'll look tomorrow when I get to the shop.

[lo72]

Switch to valve to tanks the whole thing dash to tanks

[RandyP]

I guess my helper already had removed all the tank wiring, I dug in the bed to see if I could find it, no luck. I'm guessing he tossed it since he was not going to run dual tanks on his '79. Sorry, really thought I had it.

[lo72]

Thanks anyway

[MONTEZ]

I'm dropping tanks on an 83 tonight. I have the harness you need.

[lo72]

Great what is the condition and how much? This will be from dash switch to gauge to valve and to tank for senders. i'm converting a single tank to a dual set up so i need it all...thanks Greg

[MONTEZ]

Originally Posted by lo72

Great what is the condition and how much? This will be from dash switch to gauge to valve and to tank for senders. i'm converting a single tank to a dual set up so i need it all...thanks Greg

At a glance everything looked to be unharmed. It didn't look like anyone had ever tampered with any of it. I sold the tanks and crossover lines but still have the wiring, switch and cross over mechanism (don't know what it's actually called). I ll take $25 for all of it plus shipping. Once I get it out I'll take pics so you can have a look at it. Let me know if you interested.

[lo72]

I'm interested send some pics when ya can and let me know how you want to be paid...thanks again greg

[MONTEZ]

Originally Posted by lo72

I'm interested send some pics when ya can and let me know how you want to be paid...thanks again greg

I'll do my best to get some tonight.

[lo72]

Cool, just let me know!

[MONTEZ]

I found that one section was skinned a bit near the firewall. I have a close up pic of that. There are pics of the rest. I have no idea if the crossover valve is any good, but hey it's free. Also the dash switch should probably be replaced. The only section of wire i didn't pull was the one that goes to the gauge itself. The one on your gauge should plug into this harness. It's the single pinkish/red wire the goes into the junction box on the fire wall. If you need that wire to, I can pull it, but it's gonna have to be spliced back into your junction box.

[lo72]

This looks like what i need, if i could get the gauge wire as well that would be cool. Let me know how to pay you and we will do this...thanks for your time greg

[MONTEZ]

Originally Posted by lo72

This looks like what i need, if i could get the gauge wire as well that would be cool. Let me know how to pay you and we will do this...thanks for your time greg

I'll pull it, but I'm not sure I can get it out without damaging the pin outs to the junction box. You may have to replace the pin on the inner and outter fire wall part of the junction box.

Also I sent you a pm.