VA Wtb: Power steering pump and pulley - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 05-01-2013, 12:19 AM

I have the brackets but the new pumps I have purchased don't fit it and the old ones I know nothing about their condition and/or they have brackets attached and press-fit pulleys that I can't remove to get the brackets off.....looking for a good, working PS pump and pulley. I have sold several but now need one

For a small block with short water pump. I have the lines but will take those if you prefer if they are in good condition. Or if anyone knows the best one to get aftermarket that they can verify they fit our trucks' brackets and work with a short water pump....but I also need the pulley..not just the pump and reservoir.

Bhelton · 05-01-2013, 05:47 AM

I have pump, pulley and hoses if interested.
Posted via Mobile Device

Sammy · 05-01-2013, 08:09 AM

Should be able to borrow a pulley puller at your local chain store Autozone, O'Riellys etc) with a small return deposit.

VA72C10 · 05-01-2013, 11:47 AM

Quote:

Originally Posted by Bhelton

I have pump, pulley and hoses if interested.
Posted via Mobile Device

How much shipped to 23112? Do you know the pulley to be straight and pump to work? Thanks

Quote:

Originally Posted by Sammy

Should be able to borrow a pulley puller at your local chain store Autozone, O'Riellys etc) with a small return deposit.

I know, but I just don't have time to do that right now with everything else going on. Need to get this truck finished and I am out of town over half the month for work. Thanks for mentioning that though.

chevytruckluver · 05-01-2013, 10:31 PM

I have a p/s pump with pulley from a 71 V-8, if Bhelton does not work out

VA72C10 · 05-01-2013, 10:33 PM

Quote:

Originally Posted by chevytruckluver

I have a p/s pump with pulley from a 71 V-8, if Bhelton does not work out

how much to 23112?

Bhelton · 05-01-2013, 10:38 PM

Sorry getting back to ya late, all I have is a pulley. The pump I'm reusing
Posted via Mobile Device

chevytruckluver · 05-01-2013, 10:48 PM

Quote:

Originally Posted by VA72C10

how much to 23112?

40.00 to your door sir

VA72C10 · 05-01-2013, 11:08 PM

Quote:

Originally Posted by chevytruckluver

40.00 to your door sir

sounds good, is it a good working pump and a non-bent pulley? If so, I'll take them. Pm me payment info. Thanks!

chevytruckluver · 05-01-2013, 11:29 PM

Quote:

Originally Posted by VA72C10

sounds good, is it a good working pump and a non-bent pulley? If so, I'll take them. Pm me payment info. Thanks!

pm sent

**70STOVEBOLT** · 05-03-2013, 12:18 PM

Quote:

Originally Posted by Bhelton

Sorry getting back to ya late, all I have is a pulley. The pump I'm reusing
Posted via Mobile Device

Do you know the offset on the pulley, and is it a press-on or does it have a keyway for a threaded shaft? If it is for a threaded shaft and it has appx. 1.25" rearward offset, I am interested.

Thanks,
Mark

05-01-2013, 12:19 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Wtb: Power steering pump and pulley I have the brackets but the new pumps I have purchased don't fit it and the old ones I know nothing about their condition and/or they have brackets attached and press-fit pulleys that I can't remove to get the brackets off.....looking for a good, working PS pump and pulley. I have sold several but now need one For a small block with short water pump. I have the lines but will take those if you prefer if they are in good condition. Or if anyone knows the best one to get aftermarket that they can verify they fit our trucks' brackets and work with a short water pump....but I also need the pulley..not just the pump and reservoir. __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-01-2013, 05:47 AM	#2
Bhelton Registered User Join Date: May 2012 Location: Hickory NC Posts: 2,351	Re: Wtb: Power steering pump and pulley I have pump, pulley and hoses if interested. Posted via Mobile Device

05-01-2013, 08:09 AM	#3
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Wtb: Power steering pump and pulley Should be able to borrow a pulley puller at your local chain store Autozone, O'Riellys etc) with a small return deposit. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

05-01-2013, 10:31 PM	#5
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: Wtb: Power steering pump and pulley I have a p/s pump with pulley from a 71 V-8, if Bhelton does not work out __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

05-01-2013, 10:38 PM	#7
Bhelton Registered User Join Date: May 2012 Location: Hickory NC Posts: 2,351	Re: Wtb: Power steering pump and pulley Sorry getting back to ya late, all I have is a pulley. The pump I'm reusing Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.