KS 15x8 6 lug steel wheels 4 nub

[nickv6266]

I have a set of 4 15x8 6 lug steel wheels. These are the 4 nub to clear disc brakes and accept dog dish hub caps. Shipping is high on wheels usually around $35 each, I can't help that so keep that in mind if considering these. Wheels have really nice white finish with no pitting , sorry for being dirty in pics just came off truck today . I can get additional pics. Looking to get $100 each plus $35 shipping per wheel I'll do $190 on pairs plus shipping for a little break. First I'll take them puts you up to buy. Just specify how many. Thanks.

[undertaker72]

what is there 2 different pair , will the ones in first pic clear disk , they must be aftermarket

[nickv6266]

Originally Posted by undertaker72

what is there 2 different pair , will the ones in first pic clear disk , they must be aftermarket

I took them off and left them together as they came off. First pic was pair on front with brake dust. Truck had disc brakes. If I need to be corrected I'm fine with that just tell me . I don't want anyone getting something described wrong. Thanks.

[thepenguin99]

What is different about the first two other than dirt? Look like they are all the CUCV Blazer style wheels which clear disk brakes and accept dog dish caps.

[nickv6266]

Originally Posted by thepenguin99

What is different about the first two other than dirt? Look like they are all the CUCV Blazer style wheels which clear disk brakes and accept dog dish caps.

I'm not sure they all look the same to me as well.

[DeadheadNM]

I'd take one for use as a spare if no one takes all four or maybe another member wants to share a pair? Thanks, Pete

[nickv6266]

Originally Posted by DeadheadNM

I'd take one for use as a spare if no one takes all four or maybe another member wants to share a pair? Thanks, Pete

I have one that was used as a spare that's 15x8 just not this style. 66 and older steel wheel in same condition as these. I'll do $110 shipped on it. I won't have pic until morning.

[DeadheadNM]

Originally Posted by nickv6266

I have one that was used as a spare that's 15x8 just not this style. 66 and older steel wheel in same condition as these. I'll do $110 shipped on it. I won't have pic until morning.

Thank you but it's the style currently shown with 4" inch backspace to clear disc brakes that I need - backup in case another gets damaged. LMK

[nickv6266]

Originally Posted by DeadheadNM

Thank you but it's the style currently shown with 4" inch backspace to clear disc brakes that I need - backup in case another gets damaged. LMK

Yeah that makes sense.

[bluek5]

I'll take the second pair if you split them up. They are different, take a look at the valve stems.
Paul

[nickv6266]

Originally Posted by bluek5

I'll take the second pair if you split them up. They are different, take a look at the valve stems.
Paul

Good eye , that's weird. 2nd pair are yours . shoot me a pm and we can exchange info. Thanks..

[nickv6266]

Originally Posted by DeadheadNM

Thank you but it's the style currently shown with 4" inch backspace to clear disc brakes that I need - backup in case another gets damaged. LMK

How about $125 shipped on one wheel in first pic. Will this be OK for your spare?

[DeadheadNM]

Originally Posted by nickv6266

How about $125 shipped on one wheel in first pic. Will this be OK for your spare?

Nick I would gladly do so if they matched my steelies, which are like those in the (sold) second set with an offset where the valve stem is. I'll have to pass.

I had a set of 16.5 x 9.75" steel wheels that had been widened and lack the offset shown on the second set. Could your pair have been widened? Are there circumferential weld seams inside the wheel?

[nickv6266]

Originally Posted by DeadheadNM

Nick I would gladly do so if they matched my steelies, which are like those in the (sold) second set with an offset where the valve stem is. I'll have to pass.

I had a set of 16.5 x 9.75" steel wheels that had been widened and lack the offset shown on the second set. Could your pair have been widened? Are there circumferential weld seams inside the wheel?

Ill have to look into this tomorrow and see I'm kinda stumped on this. Thanks for your guys advice and making this clear for everyone else. I got some research to do. Thanks.

[undertaker72]

im no wheel expert , I think your first pictured pair are of a aftermarket wheel co. , like the old crome smoothy, the other 2 are factory , and I didn't stay on post last night , I should have went for the latter pair or a single if you have any more let me know thanks kevin

[nickv6266]

Originally Posted by undertaker72

im no wheel expert , I think your first pictured pair are of a aftermarket wheel co. , like the old crome smoothy, the other 2 are factory , and I didn't stay on post last night , I should have went for the latter pair or a single if you have any more let me know thanks kevin

Yeah I'm not sure what the deal is . The first pic of the pair that were on front with disc brakes don't appear to ever have been widened and have a 15x8 JJ coded on inside of wheel . they appear to be factory wheels. Don't know if certain years had any differences? Anybody have any info? Thanks.

[nickv6266]

OK all wheels are sold. I had a local board member that has a matched pair to the other set on here. Thanks.

[bluek5]

Nick,
Got the wheels the other day. They look great.
Thanks again, Paul