picked up th350c for pg swap - any help?

[Irishbleueyes]

pg to th350c swap, its probably been a long while for a lot of you but anyone remember what needs to be done? Its out of a 1980 corvette, two prong tcc switch. Any help would be greatly appreciated men! Thank you

[lha1992]

I'm doing a Th350 swap from a powerglide in my truck too. Getting the TH350 from a 80 camaro. Hopefully its not a C model th350.

[Irishbleueyes]

Originally Posted by lha1992

I'm doing a Th350 swap from a powerglide in my truck too. Getting the TH350 from a 80 camaro. Hopefully its not a C model th350.

I wanted the c, locking converter will drop rpm about 200 when it locks.

[Captainfab]

You might contact a mod and see if they can move this to the 'Engine and Drivetrain' section. You will get a quicker response over there on how to wire up your TC lockup.

[tincan1966]

I am currently running one in my '65 with a 305 TBI in front of it.

You can run it without the TCC with no ill results.

In order to install as designed you will need the firewall mounted vacuum switch, and a different brake light switch. Since you have your donor application, just get those from your local parts store. I chose to use a manual engagement with a switch I can turn on and off, but having it controlled correctly would be more convenient.

[1963c-10]

I need a column shift powerglide shift rod if anyone is converting and not using the old rods...

[Irishbleueyes]

Originally Posted by Captainfab

You might contact a mod and see if they can move this to the 'Engine and Drivetrain' section. You will get a quicker response over there on how to wire up your TC lockup.

I will do that, thank you