parking brake levers in hub - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bradnree · 11-03-2015, 04:55 PM

are 1/2 ton and 3/4 ton parking brake levers in the hub the same fit in a 1967 2WD

hangman · 11-11-2015, 07:16 PM

my 1970 3/4 was missing one, could not fine one. ended up at the junkyard
found the lever off a 87 1/2 worked with a longer pin up top and I had to
grind a little dimple off the edge. but it worked

bradnree · 11-12-2015, 06:07 PM

Quote:

Originally Posted by hangman

my 1970 3/4 was missing one, could not fine one. ended up at the junkyard
found the lever off a 87 1/2 worked with a longer pin up top and I had to
grind a little dimple off the edge. but it worked

Thanks....brad

11-03-2015, 04:55 PM	#1
bradnree Registered User Join Date: Sep 2015 Location: atchison ks Posts: 19	parking brake levers in hub are 1/2 ton and 3/4 ton parking brake levers in the hub the same fit in a 1967 2WD

11-11-2015, 07:16 PM	#2
hangman Registered User Join Date: Sep 2015 Location: Louisville KY Posts: 3	Re: parking brake levers in hub my 1970 3/4 was missing one, could not fine one. ended up at the junkyard found the lever off a 87 1/2 worked with a longer pin up top and I had to grind a little dimple off the edge. but it worked



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.