NM WTB: Shims (spacers?) for the brass door align wedges on the pillars - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DeadheadNM** · 04-22-2016, 10:29 AM

After a set of OEM shims (spacers?) for the brass door alignment wedges that are affixed to the door pillars. Will buy single examples or complete set. Thanks. Pete

tjsblazer · 04-22-2016, 02:50 PM

Pete, don't hold out for it but once I get my doors hung if I have spares I will let you know. It will be a while though.

jobrla · 04-22-2016, 06:18 PM

I think I have 2 left over from hanging my doors, you can have them

jobrla · 04-22-2016, 06:23 PM

Pete, sorry, just checked and only have one, it is yours, PM me with address and will send

**DeadheadNM** · 04-22-2016, 06:30 PM

Thanks guys! Sending PM. Jeff - please keep me in mind. Will keep chasing one more in the meanwhile.

**davischevy** · 04-23-2016, 10:12 AM

I may have one or two but it will be Monday before I can look.

**DeadheadNM** · 04-23-2016, 01:17 PM

Please do and thanks for your help.

**davischevy** · 05-02-2016, 09:02 PM

I looked today and didn't come up with anything. I will keep an eye open.

**DeadheadNM** · 05-03-2016, 12:55 AM

Thanks for the follow-up and I appreciate the effort. Jobrla set me up with one, after one other. Thanks guys!

**davischevy** · 05-03-2016, 02:01 PM

Do you have all you need?

**A1971Blazer** · 05-03-2016, 02:48 PM

what's the spec on those wedges? Mine aren't even close to making contact.

**richard2717** · 05-03-2016, 03:41 PM

I saved this website a while back. I have not bought any but they appear to be the same as the Blazer ones.

https://www.opgi.com/cutlass/1969/do...inges/CH24776/

**DeadheadNM** · 05-03-2016, 05:21 PM

In need of one more OEM example. One down one to go. Richard I'll check that thanks.

EDIT - Dang those look identical. I don't need a set but good for someone who does if dimensions are same. Thanks for sharing.

tjsblazer · 05-03-2016, 10:12 PM

Quote:

Originally Posted by richard2717

I saved this website a while back. I have not bought any but they appear to be the same as the Blazer ones.

https://www.opgi.com/cutlass/1969/do...inges/CH24776/

I have this part from opgi. I bought it a while back when another posted about them.
Be aware the brass piece is the same dimension but the silver piece that screws to the door is not. It is smaller overall and the hole pitch is smaller. You could probably make them work if you couldn't find oem but for sure new holes would be required on the door side.
These would be ok if you just needed to replace the brass piece that is the part that wears.
One last item, the included shims are about 1/2 the thickness of the oem ones.

Bottom line is they could work but not an exact replacement.

**richard2717** · 05-04-2016, 06:57 AM

Quote:

Originally Posted by tjsblazer

I have this part from opgi. I bought it a while back when another posted about them.
Be aware the brass piece is the same dimension but the silver piece that screws to the door is not. It is smaller overall and the hole pitch is smaller. You could probably make them work if you couldn't find oem but for sure new holes would be required on the door side.
These would be ok if you just needed to replace the brass piece that is the part that wears.
One last item, the included shims are about 1/2 the thickness of the oem ones.

Bottom line is they could work but not an exact replacement.

Good to know, thanks for the info

04-22-2016, 10:29 AM	#1
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,319	WTB: Shims (spacers?) for the brass door align wedges on the pillars After a set of OEM shims (spacers?) for the brass door alignment wedges that are affixed to the door pillars. Will buy single examples or complete set. Thanks. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland Last edited by DeadheadNM; 04-22-2016 at 10:35 AM.

04-22-2016, 02:50 PM	#2
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: WTB: Shims (spacers?) for the brass door align wedges on the pillars Pete, don't hold out for it but once I get my doors hung if I have spares I will let you know. It will be a while though. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

04-22-2016, 06:18 PM	#3
jobrla Registered User Join Date: Jan 2015 Location: Las Cruces, NM Posts: 190	Re: WTB: Shims (spacers?) for the brass door align wedges on the pillars I think I have 2 left over from hanging my doors, you can have them

04-22-2016, 06:23 PM	#4
jobrla Registered User Join Date: Jan 2015 Location: Las Cruces, NM Posts: 190	Re: WTB: Shims (spacers?) for the brass door align wedges on the pillars Pete, sorry, just checked and only have one, it is yours, PM me with address and will send

04-22-2016, 06:30 PM	#5
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,319	Re: WTB: Shims (spacers?) for the brass door align wedges on the pillars Thanks guys! Sending PM. Jeff - please keep me in mind. Will keep chasing one more in the meanwhile. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-23-2016, 10:12 AM	#6
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,795	Re: WTB: Shims (spacers?) for the brass door align wedges on the pillars I may have one or two but it will be Monday before I can look. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

04-23-2016, 01:17 PM	#7
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,319	Re: WTB: Shims (spacers?) for the brass door align wedges on the pillars Please do and thanks for your help. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-02-2016, 09:02 PM	#8
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,795	Re: WTB: Shims (spacers?) for the brass door align wedges on the pillars I looked today and didn't come up with anything. I will keep an eye open. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

05-03-2016, 12:55 AM	#9
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,319	Re: WTB: Shims (spacers?) for the brass door align wedges on the pillars Thanks for the follow-up and I appreciate the effort. Jobrla set me up with one, after one other. Thanks guys! __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-03-2016, 02:01 PM	#10
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,795	Re: WTB: Shims (spacers?) for the brass door align wedges on the pillars Do you have all you need? __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

05-03-2016, 02:48 PM	#11
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,118	Re: WTB: Shims (spacers?) for the brass door align wedges on the pillars what's the spec on those wedges? Mine aren't even close to making contact. __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

05-03-2016, 03:41 PM	#12
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,914	Re: WTB: Shims (spacers?) for the brass door align wedges on the pillars I saved this website a while back. I have not bought any but they appear to be the same as the Blazer ones. https://www.opgi.com/cutlass/1969/do...inges/CH24776/ __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

05-03-2016, 05:21 PM	#13
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,319	Re: WTB: Shims (spacers?) for the brass door align wedges on the pillars In need of one more OEM example. One down one to go. Richard I'll check that thanks. EDIT - Dang those look identical. I don't need a set but good for someone who does if dimensions are same. Thanks for sharing. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland Last edited by DeadheadNM; 05-03-2016 at 05:24 PM. Reason: More info



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.