GA '72 model frame cuts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1969guy** · 01-11-2017, 06:29 PM

I've got a '72 3/4 ton frame I'm cutting up. Looks relatively straight.

A arm cross member is off of it already with arms gone.
Looking for $30 plus shipping and pp fees

Any cuts in front of the trailing arm support is $20 a cut plus shipping and pp fees

From the trailing arm support to the rear is $30 a cut plus shipping and pp fees

Let me know what you need

Thanks

**1969guy** · 01-12-2017, 04:49 PM

Ttt

**hybridchevy71** · 01-12-2017, 09:57 PM

I take the power steering box reinforcement section/plate , pending price and condition shipped to 92704. Thanks

Anthony14 · 01-13-2017, 02:59 AM

How much for this? I need the whole rear section for my 72 C10 - assuming this section of frame is the same?, cut as close as possible to the cross member that has the arrow.

Also, would need a shipping quote to Canada...

Anthony14 · 01-13-2017, 03:03 AM

I do have a place in the states that I could ship it too if that makes it easier

**1969guy** · 01-13-2017, 04:11 PM

Quote:

Originally Posted by Anthony14

How much for this? I need the whole rear section for my 72 C10 - assuming this section of frame is the same?, cut as close as possible to the cross member that has the arrow.

Also, would need a shipping quote to Canada...

Would want $50 plus ship for that big section. Shipping in the states would be better and probably cheaper. If you're still interested then I can get shipping quote after I cut it off.

Thanks

**1969guy** · 01-13-2017, 04:12 PM

Quote:

Originally Posted by hybridchevy71

I take the power steering box reinforcement section/plate , pending price and condition shipped to 92704. Thanks

I can get a pic later but only want $20 plus shipping for one front cut.

Anthony14 · 01-13-2017, 04:14 PM

Quote:

Originally Posted by 1969guy

Would want $50 plus ship for that big section. Shipping in the states would be better and probably cheaper. If you're still interested then I can get shipping quote after I cut it off.

Thanks

Ok hang tight, I have a local shop my way that may have this section, I don't want you to work hard if you don't have too haha. I'll let you know as soon as I do.

If they don't then we have a deal.

**hybridchevy71** · 01-13-2017, 04:41 PM

Great , I take it for $20 plus shipping thank you

Anthony14 · 01-14-2017, 02:04 PM

So I got the parts from a local shop, thanks anyways!!

**zicc1835** · 01-14-2017, 02:21 PM

Evan
ill take the rear most crossmember and the pan hard bar C member if they are not pitted i don't need the frame but if you want to cut instead of removing the rivets ill do that if you would you could wrap them together for shipping like u did the trailing arms .....to 07981 see what you think shoot me a price ....ill take them if they are clean some close up pics would help
Jess

**57taskforce** · 01-14-2017, 05:52 PM

How are the front frame horns? Only need first 4 inches of driver side

**1969guy** · 01-15-2017, 02:53 PM

Quote:

Originally Posted by Anthony14

So I got the parts from a local shop, thanks anyways!!

Ok good deal.

**1969guy** · 01-15-2017, 08:31 PM

Quote:

Originally Posted by hybridchevy71

I take the power steering box reinforcement section/plate , pending price and condition shipped to 92704. Thanks

This is it, correct?

**1969guy** · 01-15-2017, 08:34 PM

Quote:

Originally Posted by zicc1835

Evan
ill take the rear most crossmember and the pan hard bar C member if they are not pitted i don't need the frame but if you want to cut instead of removing the rivets ill do that if you would you could wrap them together for shipping like u did the trailing arms .....to 07981 see what you think shoot me a price ....ill take them if they are clean some close up pics would help
Jess

Here's a pic. $45 plus ship for both pieces if you still want them.

Rear cross member is still painted.

**1969guy** · 01-15-2017, 08:37 PM

Quote:

Originally Posted by zicc1835

Evan
ill take the rear most crossmember and the pan hard bar C member if they are not pitted i don't need the frame but if you want to cut instead of removing the rivets ill do that if you would you could wrap them together for shipping like u did the trailing arms .....to 07981 see what you think shoot me a price ....ill take them if they are clean some close up pics would help
Jess

Pan hard bar mount is surface rusted.

**hybridchevy71** · 01-15-2017, 08:37 PM

Yes pm for payment thank you

**1969guy** · 01-15-2017, 08:38 PM

Quote:

Originally Posted by 57taskforce

How are the front frame horns? Only need first 4 inches of driver side

Frame horns are decent.
If you want a pic I'll have to get it tomorrow.

Just $20 plus ship if you still want it.

**zicc1835** · 01-15-2017, 10:09 PM

Quote:

Originally Posted by 1969guy

Pan hard bar mount is surface rusted.

ok will take them u understand i do want the whole pan hard crossmember and the rear most one looks good LMK total with ship and i will get that to you
thanks

**57taskforce** · 01-16-2017, 11:35 AM

Quote:

Originally Posted by 1969guy

Frame horns are decent.
If you want a pic I'll have to get it tomorrow.

Just $20 plus ship if you still want it.

Great shipping to 87455(post office) or 87417 for ups/FedEx.

**1969guy** · 01-16-2017, 10:34 PM

Quote:

Originally Posted by hybridchevy71

Yes pm for payment thank you

Pm sent

**hybridchevy71** · 01-16-2017, 10:40 PM

Payment sent , thank you!!!!
Hector

**1969guy** · 01-16-2017, 10:48 PM

Quote:

Originally Posted by 57taskforce

Great shipping to 87455(post office) or 87417 for ups/FedEx.

Pm sent.

**1969guy** · 01-16-2017, 10:49 PM

Quote:

Originally Posted by hybridchevy71

Payment sent , thank you!!!!
Hector

Thank you I'll get you a tracking # as soon as I get it out.

**57taskforce** · 01-17-2017, 12:04 AM

Quote:

Originally Posted by 1969guy

Pm sent.

Pm returned

01-11-2017, 06:29 PM	#1
1969guy Senior Member Join Date: Mar 2012 Location: Royston, Ga Posts: 625	'72 model frame cuts I've got a '72 3/4 ton frame I'm cutting up. Looks relatively straight. A arm cross member is off of it already with arms gone. Looking for $30 plus shipping and pp fees Any cuts in front of the trailing arm support is $20 a cut plus shipping and pp fees From the trailing arm support to the rear is $30 a cut plus shipping and pp fees Let me know what you need Thanks __________________ Evan - 1969 C10 LWB fltsd 307 3spd man.steer 3.73 rear orig.white/turquoise poly with drk turquoise int - 1972 Custom Deluxe10 LWB fltsd 350/TH350 pwr. steer/brks A/C 3.07posi rr orig.med blue with blue cloth trim.

01-12-2017, 04:49 PM	#2
1969guy Senior Member Join Date: Mar 2012 Location: Royston, Ga Posts: 625	Re: '72 model frame cuts Ttt __________________ Evan - 1969 C10 LWB fltsd 307 3spd man.steer 3.73 rear orig.white/turquoise poly with drk turquoise int - 1972 Custom Deluxe10 LWB fltsd 350/TH350 pwr. steer/brks A/C 3.07posi rr orig.med blue with blue cloth trim.

01-12-2017, 09:57 PM	#3
hybridchevy71 Registered User Join Date: Mar 2009 Location: Anaheim, CA Posts: 177	Re: '72 model frame cuts I take the power steering box reinforcement section/plate , pending price and condition shipped to 92704. Thanks

01-13-2017, 02:59 AM	#4
Anthony14 Registered User Join Date: Apr 2014 Location: Brantford, Ontario Posts: 87	Re: '72 model frame cuts How much for this? I need the whole rear section for my 72 C10 - assuming this section of frame is the same?, cut as close as possible to the cross member that has the arrow. Also, would need a shipping quote to Canada... Attached Images

01-13-2017, 03:03 AM	#5
Anthony14 Registered User Join Date: Apr 2014 Location: Brantford, Ontario Posts: 87	Re: '72 model frame cuts I do have a place in the states that I could ship it too if that makes it easier

01-13-2017, 04:41 PM	#9
hybridchevy71 Registered User Join Date: Mar 2009 Location: Anaheim, CA Posts: 177	Re: '72 model frame cuts Great , I take it for $20 plus shipping thank you

01-14-2017, 02:04 PM	#10
Anthony14 Registered User Join Date: Apr 2014 Location: Brantford, Ontario Posts: 87	Re: '72 model frame cuts So I got the parts from a local shop, thanks anyways!!

01-14-2017, 02:21 PM	#11
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,410	Re: '72 model frame cuts Evan ill take the rear most crossmember and the pan hard bar C member if they are not pitted i don't need the frame but if you want to cut instead of removing the rivets ill do that if you would you could wrap them together for shipping like u did the trailing arms .....to 07981 see what you think shoot me a price ....ill take them if they are clean some close up pics would help Jess __________________ Grand Theft Auto https://67-72chevytrucks.com/vboard/...d.php?t=855961 Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

01-14-2017, 05:52 PM	#12
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,593	Re: '72 model frame cuts How are the front frame horns? Only need first 4 inches of driver side __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

01-15-2017, 08:37 PM	#17
hybridchevy71 Registered User Join Date: Mar 2009 Location: Anaheim, CA Posts: 177	Re: '72 model frame cuts Yes pm for payment thank you

01-16-2017, 10:40 PM	#22
hybridchevy71 Registered User Join Date: Mar 2009 Location: Anaheim, CA Posts: 177	Re: '72 model frame cuts Payment sent , thank you!!!! Hector



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.