CA WTB...suburban clamshell parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lownslw64 · 01-11-2019, 09:16 PM

I wanted to see if anyone has a lower seal plate that goes from side to side for a clamshell gate to bolt onto available in decent condition. Preferably local but would entertain shipping items also. I am switching my suburban over to clamshell from Barn doors and these are the last items needed. I've attached pics of were the parts would be. Thanks

lownslw64 · 01-15-2019, 01:15 PM

ttt

**GMCNUT** · 01-16-2019, 03:23 PM

I should have a spare set of the Chrome tailgate supports but they are not cheap if you haven't found that out yet - 200 a set.

Also, do you already have the clamshell upper liftgate supports? they are even higher but I think I have one

lownslw64 · 01-16-2019, 04:20 PM

let me clarify a little bit for the hardware that is needed for the lower gate. I don't need the tailgate supports I just need the part that goes above it that the lower gate will latch to. here is a pic from another burb I found. I have both the lower gate and upper gate supports.

1960chevypanel · 01-16-2019, 10:28 PM

I probably have those catches. With the storm tomorrow I can't check until Friday, but I'll let you know.

lownslw64 · 01-17-2019, 10:25 AM

ok, thanks for looking everybody!

**GMCNUT** · 01-17-2019, 11:06 AM

Quote:

Originally Posted by lownslw64

let me clarify a little bit for the hardware that is needed for the lower gate. I don't need the tailgate supports I just need the part that goes above it that the lower gate will latch to. here is a pic from another burb I found. I have both the lower gate and upper gate supports.

Gotcha - yeah, I had a bunch of those at one time but systematically sold them all over time dont think I have any now

1960chevypanel · 01-18-2019, 03:43 PM

Just checked a couple of my trucks, your top and bottom center barn door catches are the same as left and right clamshell, so you can just relocate them. I have extras if you need them.

lownslw64 · 01-18-2019, 04:20 PM

awesom! thanks for looking and noticing that. i can use mine then.

lownslw64 · 01-21-2019, 11:00 PM

ttt

lownslw64 · 01-27-2019, 11:35 AM

ttt

lownslw64 · 02-16-2019, 10:32 AM

ttt

lownslw64 · 03-02-2019, 10:51 AM

ttt

**tjmb1086** · 03-02-2019, 11:05 PM

I believe i have those parts will know forsure Monday

Grandpa54 · 03-03-2019, 09:24 PM

Are they the same as the top and bottom of the doors?

lownslw64 · 03-03-2019, 09:51 PM

Quote:

Originally Posted by Grandpa54

Are they the same as the top and bottom of the doors?

Are you asking about the latches? If so yes......another board member let me know that so I am able to use mine from my barn doors.

1960chevypanel · 03-04-2019, 01:54 AM

It's actually the catches that are the same, not the latches. None of the latches interchange.

Grandpa54 · 03-04-2019, 03:11 PM

Quote:

Originally Posted by 1960chevypanel

it's actually the catches that are the same, not the latches. None of the latches interchange.

correct

My65's · 02-10-2020, 12:27 PM

Quote:

Originally Posted by 1960chevypanel

It's actually the catches that are the same, not the latches. None of the latches interchange.

I know im resurecting an old post but has anyone found these catches repopped? I need a new set for my 65 clamshell.

01-11-2019, 09:16 PM	#1
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	WTB...suburban clamshell parts I wanted to see if anyone has a lower seal plate that goes from side to side for a clamshell gate to bolt onto available in decent condition. Preferably local but would entertain shipping items also. I am switching my suburban over to clamshell from Barn doors and these are the last items needed. I've attached pics of were the parts would be. Thanks Attached Images __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax Last edited by lownslw64; 01-18-2019 at 07:12 PM.

01-15-2019, 01:15 PM	#2
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: WTB...suburban clamshell parts ttt __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

01-16-2019, 03:23 PM	#3
GMCNUT Senior Member Join Date: Jun 2007 Location: Arab Alabama Posts: 1,809	Re: WTB...suburban clamshell parts I should have a spare set of the Chrome tailgate supports but they are not cheap if you haven't found that out yet - 200 a set. Also, do you already have the clamshell upper liftgate supports? they are even higher but I think I have one __________________ My Projects and Toys - All 100% Stock 1972 CST "Highlander" Blazer - 350 auto, PS, PB, A/C, Tilt, Tach, AM/FM & Positraction 1966 Chevy SWB Fleetside BBW Custom Cab, #'s matching 327 V8 & Powerglide, factory deluxe heat, PS, PB, Tinted Glass, sway bar 1961 Chevy SWB Fleetside BBW Custom Cab #'s matching 283 V8 & Powerglide w/ uber-rare Cool-Pack A/C, factory PB, deluxe heat, Clock 1961 GMC K1000 4x4 SWB w/ BBW, Custom Cab and numbers matching 305D V6 engine & 4 spd 1960 GMC SWB Fleetside BBW Custom Cab #'s matching 305A V6 & Hydramatic, factory PB, Clock, Tach, Compass, Hood Jet 1959 Chevy SWB Fleetside BBW Custom Cab w/ rare stainless bed trim, #'s matching 283 V8 & Hydramatic, Deluxe Heat, radio, spotlight 1958 Chevy Cameo #'s matching 283 V8 & Hydramatic, radio, window washers, Factory PB 1958 GMC BBW SWB Fleetside Custom Cab, #'s matching 336 V8 Hydramatic, Factory PS, PB, Clock, RSD, Deluxe Heat & Hood Jet 1957 GMC Suburban Pickup (GMC's Cameo) #'s matching 347 V8 Hydramatic, uber-rare vacuum ashtray, Factory PS, PB, Clock, RSD, Hood Jet 1956 Chevy 3800 1 ton w/ rare 9 ft stepside bed, factory 265 V8 w/ Hydramatic, factory PB, Custom Cab, deluxe heat, spotlight and hood jet.

01-16-2019, 04:20 PM	#4
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: WTB...suburban clamshell parts let me clarify a little bit for the hardware that is needed for the lower gate. I don't need the tailgate supports I just need the part that goes above it that the lower gate will latch to. here is a pic from another burb I found. I have both the lower gate and upper gate supports. Attached Images __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

01-16-2019, 10:28 PM	#5
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,629	Re: WTB...suburban clamshell parts I probably have those catches. With the storm tomorrow I can't check until Friday, but I'll let you know.

01-17-2019, 10:25 AM	#6
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: WTB...suburban clamshell parts ok, thanks for looking everybody! __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

01-18-2019, 03:43 PM	#8
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,629	Re: WTB...suburban clamshell parts Just checked a couple of my trucks, your top and bottom center barn door catches are the same as left and right clamshell, so you can just relocate them. I have extras if you need them.

01-18-2019, 04:20 PM	#9
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: WTB...suburban clamshell parts awesom! thanks for looking and noticing that. i can use mine then. __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

01-21-2019, 11:00 PM	#10
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: WTB...suburban clamshell parts ttt __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

01-27-2019, 11:35 AM	#11
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: WTB...suburban clamshell parts ttt __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

02-16-2019, 10:32 AM	#12
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: WTB...suburban clamshell parts ttt __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

03-02-2019, 10:51 AM	#13
lownslw64 Registered User Join Date: Feb 2009 Location: Middleton, Idaho Posts: 235	Re: WTB...suburban clamshell parts ttt __________________ 1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax

03-02-2019, 11:05 PM	#14
tjmb1086 Senior Member Join Date: Feb 2014 Location: Ks Posts: 1,092	Re: WTB...suburban clamshell parts I believe i have those parts will know forsure Monday

03-03-2019, 09:24 PM	#15
Grandpa54 Registered User Join Date: Mar 2011 Location: Bakersfield Ca. Posts: 417	Re: WTB...suburban clamshell parts Are they the same as the top and bottom of the doors?

03-04-2019, 01:54 AM	#17
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,629	Re: WTB...suburban clamshell parts It's actually the catches that are the same, not the latches. None of the latches interchange.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.