OR WTB 71-72 12 bolt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69SCSS · 02-19-2020, 10:10 PM

Looking for a (wide, 5 lug) 71-72 coil spring 12 bolt, ratio not important. Do not need brakes. I will pick up anywhere in Western OR or WA. Let me know if you have one.
Thanks!

maverickmk · 02-20-2020, 09:35 AM

Quote:

Originally Posted by 69SCSS

Looking for a (wide, 5 lug) 71-72 coil spring 12 bolt, ratio not important. Do not need brakes. I will pick up anywhere in Western OR or WA. Let me know if you have one.
Thanks!

Not real close to you, but it's boxed up and ready to go. (not mine)

http://67-72chevytrucks.com/vboard/s...d.php?t=801482

CG · 02-20-2020, 10:24 AM

I might have one. Tell me what the measurement is from backing plate to backing plate. If I remember correctly I don't have the drums on it so that would be easiest way to measure.

**PICKMUP** · 02-20-2020, 12:46 PM

I just got a running '72. If I sell the 12 bolt out of it, it will be $800...You pull.

projectking · 02-20-2020, 05:58 PM

Quote:

Originally Posted by PICKMUP

I just got a running '72. If I sell the 12 bolt out of it, it will be $800...You pull.

What a deal

MattyBs71 · 02-20-2020, 06:07 PM

Quote:

Originally Posted by projectking

What a deal

**PICKMUP** · 02-20-2020, 09:15 PM

Quote:

Originally Posted by projectking

What a deal

???What does that mean? Good or Bad? It is the same price as the other one on here right now.

69SCSS · 02-20-2020, 11:47 PM

Quote:

Originally Posted by CG

I might have one. Tell me what the measurement is from backing plate to backing plate. If I remember correctly I don't have the drums on it so that would be easiest way to measure.

I will measure for you. I think its somewhere on the board too. Thanks!

69SCSS · 02-20-2020, 11:51 PM

Quote:

Originally Posted by CG

I might have one. Tell me what the measurement is from backing plate to backing plate. If I remember correctly I don't have the drums on it so that would be easiest way to measure.

Spoke too soon, found it in a quick search:

The 70 1/2 and earlier width is 62-3/8" from wheel mount to wheel mount. The 70 1/2 and later (up to about 78 or so) width is 63-3/4" from wheel mount to wheel mount.

If it is the larger and has 5 lug axles, do you know the ratio and condition? What would you want for it?

bmfm64 · 02-21-2020, 12:16 AM

For 800 dollars I would think that box would show up on my front porch. Holy cow.

Anyways- I have a couple rear ends, I can measure in the morning- relatively positive I have one that needs drums. PM me a number and I’ll send you some pics. I’m in Covington WA.

MattyBs71 · 02-21-2020, 12:23 AM

Quote:

Originally Posted by bmfm64

For 800 dollars I would think that box would show up on my front porch. Holy cow.

Anyways- I have a couple rear ends, I can measure in the morning- relatively positive I have one that needs drums. PM me a number and I’ll send you some pics. I’m in Covington WA.

Awesome !!!

Buddy is the man!!!

CG · 02-21-2020, 01:22 AM

Quote:

Originally Posted by 69SCSS

Spoke too soon, found it in a quick search:

The 70 1/2 and earlier width is 62-3/8" from wheel mount to wheel mount. The 70 1/2 and later (up to about 78 or so) width is 63-3/4" from wheel mount to wheel mount.

If it is the larger and has 5 lug axles, do you know the ratio and condition? What would you want for it?

Im pretty sure its a five lug, no reason for me to have purchased a six lug, just unsure of the width or ratio. Condition … all I know is it came out of a running truck that was parted. Im not positive but I think I paid 200 bucks for it so that is what I would ask.

But it looks like another fella has one so Ill wait to see what he comes up with for you.

69SCSS · 02-22-2020, 01:20 PM

Quote:

Originally Posted by bmfm64

For 800 dollars I would think that box would show up on my front porch. Holy cow.

Anyways- I have a couple rear ends, I can measure in the morning- relatively positive I have one that needs drums. PM me a number and I’ll send you some pics. I’m in Covington WA.

I PM'd the other day. Send me some pics when you have time.

CG · 02-26-2020, 12:07 PM

I haven't found the one I believe I have yet. When our nephew purchased the family farm a lot of stuff got moved around and we scrapped five parts and "project" vehicles. I hope its hiding out there somewhere and it didn't get hauled off. Im going out there again today to poke around.

c1069 · 02-26-2020, 06:53 PM

Wish we were closer :'(

69SCSS · 02-27-2020, 11:33 AM

Quote:

Originally Posted by CG

I haven't found the one I believe I have yet. When our nephew purchased the family farm a lot of stuff got moved around and we scrapped five parts and "project" vehicles. I hope its hiding out there somewhere and it didn't get hauled off. Im going out there again today to poke around.

No worries, some other stuff came up and I have to put off getting the 12 bolt replaced for now. Life happens as always. Truck still works but noisy as hell from 45-60 and of course I live at the coast, so that's right where the speeds are out here.

bmfm64 · 02-27-2020, 02:25 PM

Quote:

Originally Posted by 69SCSS

No worries, some other stuff came up and I have to put off getting the 12 bolt replaced for now. Life happens as always. Truck still works but noisy as hell from 45-60 and of course I live at the coast, so that's right where the speeds are out here.

I can bring the one i Texted you about down to the Portland Swapmeet if that helps.

69SCSS · 02-27-2020, 03:39 PM

Quote:

Originally Posted by bmfm64

I can bring the one i Texted you about down to the Portland Swapmeet if that helps.

I'll have to see how this all works out, might have to get it fixed before then, the 68 is my daily. Thanks!

02-19-2020, 10:10 PM	#1
69SCSS Registered User Join Date: Aug 2012 Location: Neskowin OR Posts: 1,156	WTB 71-72 12 bolt Looking for a (wide, 5 lug) 71-72 coil spring 12 bolt, ratio not important. Do not need brakes. I will pick up anywhere in Western OR or WA. Let me know if you have one. Thanks! __________________ My 68 SWB Al Silveira Music <- My daughter loves this guy 8-)

02-20-2020, 10:24 AM	#3
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,153	Re: WTB 71-72 12 bolt I might have one. Tell me what the measurement is from backing plate to backing plate. If I remember correctly I don't have the drums on it so that would be easiest way to measure. __________________ … … … … … … … … ... … … … … … … … … … … …

02-20-2020, 12:46 PM	#4
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,168	Re: WTB 71-72 12 bolt I just got a running '72. If I sell the 12 bolt out of it, it will be $800...You pull. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

02-21-2020, 12:16 AM	#10
bmfm64 Registered User Join Date: May 2011 Location: Covington, Wa Posts: 5,247	Re: WTB 71-72 12 bolt For 800 dollars I would think that box would show up on my front porch. Holy cow. Anyways- I have a couple rear ends, I can measure in the morning- relatively positive I have one that needs drums. PM me a number and I’ll send you some pics. I’m in Covington WA.

02-26-2020, 12:07 PM	#14
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,153	Re: WTB 71-72 12 bolt I haven't found the one I believe I have yet. When our nephew purchased the family farm a lot of stuff got moved around and we scrapped five parts and "project" vehicles. I hope its hiding out there somewhere and it didn't get hauled off. Im going out there again today to poke around. __________________ … … … … … … … … ... … … … … … … … … … … …

02-26-2020, 06:53 PM	#15
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: WTB 71-72 12 bolt Wish we were closer :'( __________________ Pancho 69 c/10 step side 454/400 with 3.07



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.