55.2-59 55-57 Cameo rear bumper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tbrown5079 · 12-29-2020, 10:58 PM

I have been using a fiberglass one piece bumper on my cameo since I started driving it because it is the only thing I could find that would fit. The center sections are not available and chrome bumper ends were on backorder. I have since scored on a beautiful set of chrome ends and thought I could get a metal fab shop to bend the center section using 16 or 18 gauge steel. Not happening. Does anyone know of some bumper made for another vehicle that would have a similar bend to match the ends I have. I was told years ago that there was, but that source is no longer with us. Not worried about chrome, just so the end matches the curve, I can cut and weld for the license plate etc. Any help would be appreciated. Tbrown

58CameoAZ · 12-30-2020, 04:44 PM

I have a complete rear bumper off a Cameo (3-Pc's) the Ends and Center and (4pc) Bumper Brackets. The Bumper Outer ends Are Drilled for the Bumperettes,
Its an Extra Set i have and with my 58 Cameo Build and have thought about letting them
go?
PM Me and you might twist my arm in letting them go? if you are interested?

**GMCNUT** · 01-01-2021, 05:24 AM

So why don't you check with 58cameoAZ above and see what kind of cash we are talking for his whole three piece set and since you wouldn't need them, maybe I could buy the bumper ends and you and I basically split the price he wants for all of it. I technically only need a driver bumper end but depending on what he wants I would maybe help ease your cost vs you buying all of it and having to sell off the ends

58CameoAZ · 01-01-2021, 10:04 AM

Lets Back up here, I have the Center (Drop Down Piece that the License Plate bolts to and drops down for Spare tire) on top of that i have the other two sides that the bumperettes bolt to this makes up the complete bumper -Minus The Chrome Bumper
Ends and the Bumperettes I also have with this the Four pieces of Bumper Brackets that Bolt to the frame and the 3-Pc Bumper bolts to it.
Sorry for any Confusion i may have caused

Allen

Ok, Confession, I do have an Extra Set of the Chrome Bumper ends, BUT, Man, i am not sure if i can Let them go, They would need to be re-chromed.
PM me GMCNUT and maybe we can discuss?

tbrown5079 · 01-01-2021, 04:13 PM

OK. 58cameoAZ, I apologize for delaying on getting back to you but I was into another project and also didn't realize the 58 cameo parts also fit the 55-57. I will PM you to get more details. Thanks, and apologies for not getting back sooner. Tbrown

12-29-2020, 10:58 PM	#1
tbrown5079 Registered User Join Date: Feb 2007 Location: Blairsville, PA Posts: 301	55-57 Cameo rear bumper I have been using a fiberglass one piece bumper on my cameo since I started driving it because it is the only thing I could find that would fit. The center sections are not available and chrome bumper ends were on backorder. I have since scored on a beautiful set of chrome ends and thought I could get a metal fab shop to bend the center section using 16 or 18 gauge steel. Not happening. Does anyone know of some bumper made for another vehicle that would have a similar bend to match the ends I have. I was told years ago that there was, but that source is no longer with us. Not worried about chrome, just so the end matches the curve, I can cut and weld for the license plate etc. Any help would be appreciated. Tbrown __________________ tbrown's 56 Cameo Build

12-30-2020, 04:44 PM	#2
58CameoAZ Registered User Join Date: Jan 2014 Location: Payson Posts: 425	Re: 55-57 Cameo rear bumper I have a complete rear bumper off a Cameo (3-Pc's) the Ends and Center and (4pc) Bumper Brackets. The Bumper Outer ends Are Drilled for the Bumperettes, Its an Extra Set i have and with my 58 Cameo Build and have thought about letting them go? PM Me and you might twist my arm in letting them go? if you are interested?

01-01-2021, 05:24 AM	#3
GMCNUT Senior Member Join Date: Jun 2007 Location: Arab Alabama Posts: 1,809	Re: 55-57 Cameo rear bumper So why don't you check with 58cameoAZ above and see what kind of cash we are talking for his whole three piece set and since you wouldn't need them, maybe I could buy the bumper ends and you and I basically split the price he wants for all of it. I technically only need a driver bumper end but depending on what he wants I would maybe help ease your cost vs you buying all of it and having to sell off the ends __________________ My Projects and Toys - All 100% Stock 1972 CST "Highlander" Blazer - 350 auto, PS, PB, A/C, Tilt, Tach, AM/FM & Positraction 1966 Chevy SWB Fleetside BBW Custom Cab, #'s matching 327 V8 & Powerglide, factory deluxe heat, PS, PB, Tinted Glass, sway bar 1961 Chevy SWB Fleetside BBW Custom Cab #'s matching 283 V8 & Powerglide w/ uber-rare Cool-Pack A/C, factory PB, deluxe heat, Clock 1961 GMC K1000 4x4 SWB w/ BBW, Custom Cab and numbers matching 305D V6 engine & 4 spd 1960 GMC SWB Fleetside BBW Custom Cab #'s matching 305A V6 & Hydramatic, factory PB, Clock, Tach, Compass, Hood Jet 1959 Chevy SWB Fleetside BBW Custom Cab w/ rare stainless bed trim, #'s matching 283 V8 & Hydramatic, Deluxe Heat, radio, spotlight 1958 Chevy Cameo #'s matching 283 V8 & Hydramatic, radio, window washers, Factory PB 1958 GMC BBW SWB Fleetside Custom Cab, #'s matching 336 V8 Hydramatic, Factory PS, PB, Clock, RSD, Deluxe Heat & Hood Jet 1957 GMC Suburban Pickup (GMC's Cameo) #'s matching 347 V8 Hydramatic, uber-rare vacuum ashtray, Factory PS, PB, Clock, RSD, Hood Jet 1956 Chevy 3800 1 ton w/ rare 9 ft stepside bed, factory 265 V8 w/ Hydramatic, factory PB, Custom Cab, deluxe heat, spotlight and hood jet.

01-01-2021, 10:04 AM	#4
58CameoAZ Registered User Join Date: Jan 2014 Location: Payson Posts: 425	Re: 55-57 Cameo rear bumper Lets Back up here, I have the Center (Drop Down Piece that the License Plate bolts to and drops down for Spare tire) on top of that i have the other two sides that the bumperettes bolt to this makes up the complete bumper -Minus The Chrome Bumper Ends and the Bumperettes I also have with this the Four pieces of Bumper Brackets that Bolt to the frame and the 3-Pc Bumper bolts to it. Sorry for any Confusion i may have caused Allen Ok, Confession, I do have an Extra Set of the Chrome Bumper ends, BUT, Man, i am not sure if i can Let them go, They would need to be re-chromed. PM me GMCNUT and maybe we can discuss? Last edited by 58CameoAZ; 01-01-2021 at 10:10 AM.

01-01-2021, 04:13 PM	#5
tbrown5079 Registered User Join Date: Feb 2007 Location: Blairsville, PA Posts: 301	Re: 55-57 Cameo rear bumper OK. 58cameoAZ, I apologize for delaying on getting back to you but I was into another project and also didn't realize the 58 cameo parts also fit the 55-57. I will PM you to get more details. Thanks, and apologies for not getting back sooner. Tbrown __________________ tbrown's 56 Cameo Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.