Class of 69 Pics for you!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 12-15-2003, 07:31 PM

hi

teeitup · 12-15-2003, 07:32 PM

he

teeitup · 12-15-2003, 07:33 PM

7

teeitup · 12-15-2003, 07:34 PM

11

CPNEJR · 12-15-2003, 07:35 PM

Do you know if it'd run when put together as is?

just wonderin'

teeitup · 12-15-2003, 07:35 PM

12

ZOOMY · 12-16-2003, 09:59 PM

Canb anyone decode the number in pic # 12 ?...vehicle type etc. We already know that it's a 396 or 427, oval port, closed chamber BB......Thanks.....Zoomy

BLAZERMAN · 12-16-2003, 10:56 PM

1966 Chevelle 396, cast april 25 at the Tonawanda plant

dinnut · 12-16-2003, 11:03 PM

chevelle motors were good motors!

ZOOMY · 12-16-2003, 11:26 PM

thanks BLAZERMAN.

Class of 69 · 12-17-2003, 12:30 AM

The block is listed as either 2 or 4 bolt main. With the oval heads, I'd bet it is a 2 bolt. It sure is clean inside. It would probably be a nice one to go through Zoomy.

67shortie · 12-17-2003, 09:39 AM

I run those 702's on the 427 in the Chevelle. Closed chamber, 98cc, 2.06/1.72 valves. Mine are not stock (2.18/1.88 valves, port/bowl work), but they run great on the engine

Broken_down? · 12-17-2003, 09:35 PM

so the numbers TO425EF6 F13388 tells where the engine was built from originally? and what type of truck it came from? Cause my motor is a 350 but came from s new model and I am nto sure exactly what yr it came from. my grandpa's brother died before he could tell anyone what yr it came outta.

Rich

ZOOMY · 12-18-2003, 02:13 AM

If it was a 427 I would've snapped it up, but IMO a strong 350 is pretty close to a 396 if you take into account the weight penalty. If I'm going with a big block weight penalty I want enough extrea cubes to make up for it. Randy has several 454's there. If he has a clean one, I'll buy it. My guess is that 396 was recently gone thru being that clean. That impressed me too. If it has a grunch of miles on it, then somebody took meticulous care of it on the inside at least......ZZ

12-15-2003, 07:31 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Class of 69 Pics for you!!! hi __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-15-2003, 07:32 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	he __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-15-2003, 07:33 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	7 __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-15-2003, 07:34 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	11 __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-15-2003, 07:35 PM	#5
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Do you know if it'd run when put together as is? just wonderin' __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

12-15-2003, 07:35 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	12 __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-16-2003, 09:59 PM	#7
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	decode Canb anyone decode the number in pic # 12 ?...vehicle type etc. We already know that it's a 396 or 427, oval port, closed chamber BB......Thanks.....Zoomy Last edited by ZOOMY; 12-16-2003 at 10:02 PM.

12-16-2003, 10:56 PM	#8
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	1966 Chevelle 396, cast april 25 at the Tonawanda plant __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C Last edited by BLAZERMAN; 12-16-2003 at 11:08 PM.

12-16-2003, 11:03 PM	#9
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	chevelle motors were good motors! __________________ 70 longbed 496/th400/Ford 9"

12-16-2003, 11:26 PM	#10
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	thanks thanks BLAZERMAN.

12-17-2003, 12:30 AM	#11
Class of 69 Registered User Join Date: Mar 2003 Location: Stillwater MN Posts: 1,166	The block is listed as either 2 or 4 bolt main. With the oval heads, I'd bet it is a 2 bolt. It sure is clean inside. It would probably be a nice one to go through Zoomy. __________________ 69 GMC K10 ..some restoration required....still..

12-17-2003, 09:39 AM	#12
67shortie Green club Join Date: May 2002 Location: Central CA Posts: 1,059	I run those 702's on the 427 in the Chevelle. Closed chamber, 98cc, 2.06/1.72 valves. Mine are not stock (2.18/1.88 valves, port/bowl work), but they run great on the engine __________________ 71 short/fleet ECE 4/6 drop, LQ4/700r4/3.42 gears 70 SS396 Chevelle 427/200-4R/3.73posi 61 Lincoln Continental, black on black Son you are going to drive me to drinkin if you don't stop drivin that hot rod lincoln

12-18-2003, 02:13 AM	#14
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	396 If it was a 427 I would've snapped it up, but IMO a strong 350 is pretty close to a 396 if you take into account the weight penalty. If I'm going with a big block weight penalty I want enough extrea cubes to make up for it. Randy has several 454's there. If he has a clean one, I'll buy it. My guess is that 396 was recently gone thru being that clean. That impressed me too. If it has a grunch of miles on it, then somebody took meticulous care of it on the inside at least......ZZ



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.