Intellitronix printed circuit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70STOVEBOLT** · 11-24-2021, 11:00 AM

Does anyone have experience with these? I see lots of bad experiences with their digital dashes, but nothing about the PCBs. They say "made in usa with lifetime warranty".

Peanut74 · 11-24-2021, 10:17 PM

I have bought one and have done the dash wiring side. That portion was not bad. I have not yet installed the gauge package itself yet. Hoping to do that in the coming months if everything works out as planned.

**kev2809** · 11-25-2021, 08:16 AM

I don't have one but was wondering the same thing. they are like half or a third of the price of the major brand out there. I just wish they had a needle gauge avaliable. I HATE the numbers constantly moving while driving. my aunt had a grand prix about 20 years ago with a digital speedo and I couldn't do it

**70STOVEBOLT** · 11-25-2021, 09:18 AM

I am asking about their printed circuit, not the entire cluster. I ordered one so I will see if it’s good or not.

**kev2809** · 11-25-2021, 11:30 AM

ohhh didnt even realize they make a printed circuit for the stock clusters

**70STOVEBOLT** · 11-25-2021, 11:39 AM

They are half the cost, or less, than most vendors. eBay link below

https://www.ebay.com/itm/30283796069...OSwFXNZckCHare

**70STOVEBOLT** · 11-29-2021, 02:43 PM

I received the printed circuit today. I have not installed it yet, but one thing I did notice is that it is paper thin. I will report back once it is installed, hopefully this week sometime.

**kev2809** · 11-29-2021, 03:23 PM

there were only 2 reviews from that link I think and neither were good.

hope it works out

**70STOVEBOLT** · 11-29-2021, 03:44 PM

Quote:

Originally Posted by kev2809

there were only 2 reviews from that link I think and neither were good.

hope it works out

I saw those. I confirmed everything lines up by laying it on top of the original, so that should not be an issue. If it fails I will try to repair the original. It has a broken circuit in the cluster feed connection area, one of the paths for the fuel gauge is broken. I found some threads on here that discuss repairing the broken paths, so I may try that anyway to see if I can fix it.

**lks dcvn** · 12-27-2021, 01:45 PM

Used them a few times - no issues. Yes - they are flimsy plastic compared to the originals. I swapped over to LED bulbs when I used these and have had zero issues.

I haven't removed these from the truck since I installed them so unsure of long term wear/tear around the dash cluster harness connection - that may be the only concern I would have down the road.

**70STOVEBOLT** · 12-27-2021, 06:08 PM

I used LEDs also. Had to remove the dash after install to fix a sticky tach needle, and the circuit is still working.

11-24-2021, 11:00 AM	#1
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,547	Intellitronix printed circuit Does anyone have experience with these? I see lots of bad experiences with their digital dashes, but nothing about the PCBs. They say "made in usa with lifetime warranty". __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-24-2021, 10:17 PM	#2
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	Re: Intellitronix printed circuit I have bought one and have done the dash wiring side. That portion was not bad. I have not yet installed the gauge package itself yet. Hoping to do that in the coming months if everything works out as planned. __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a thousand pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk"

11-25-2021, 08:16 AM	#3
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: Intellitronix printed circuit I don't have one but was wondering the same thing. they are like half or a third of the price of the major brand out there. I just wish they had a needle gauge avaliable. I HATE the numbers constantly moving while driving. my aunt had a grand prix about 20 years ago with a digital speedo and I couldn't do it __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-25-2021, 09:18 AM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,547	Re: Intellitronix printed circuit I am asking about their printed circuit, not the entire cluster. I ordered one so I will see if it’s good or not. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-25-2021, 11:30 AM	#5
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: Intellitronix printed circuit ohhh didnt even realize they make a printed circuit for the stock clusters __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-25-2021, 11:39 AM	#6
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,547	Re: Intellitronix printed circuit They are half the cost, or less, than most vendors. eBay link below https://www.ebay.com/itm/30283796069...OSwFXNZckCHare __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-29-2021, 02:43 PM	#7
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,547	Re: Intellitronix printed circuit I received the printed circuit today. I have not installed it yet, but one thing I did notice is that it is paper thin. I will report back once it is installed, hopefully this week sometime. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-29-2021, 03:23 PM	#8
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: Intellitronix printed circuit there were only 2 reviews from that link I think and neither were good. hope it works out __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-27-2021, 01:45 PM	#10
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,352	Re: Intellitronix printed circuit Used them a few times - no issues. Yes - they are flimsy plastic compared to the originals. I swapped over to LED bulbs when I used these and have had zero issues. I haven't removed these from the truck since I installed them so unsure of long term wear/tear around the dash cluster harness connection - that may be the only concern I would have down the road.

12-27-2021, 06:08 PM	#11
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,547	Re: Intellitronix printed circuit I used LEDs also. Had to remove the dash after install to fix a sticky tach needle, and the circuit is still working. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.