![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Sep 2003
Location: Lewisville, NC
Posts: 1,836
|
2 intakes, tires, custom bumper, 15x10's, Holley
Got a few parts laying around that I could stand to get rid of.
1. Edelbrock Torker II Intake manifold, was on 350 which ran great when intake was pulled, reason taken off was for emissions. $50 2. Factory GM Aluminum intake manifold with EGR provisions, not sure what its off of, is for a Small Block and was on my 350, back left carb bolt hole had some threads stripped but a longer bolt solved the problem, reason removed was for a better intake, worked great while on my 350. $50 3. Set of 4 31x10.5x15" Hoosier Radial D/T mud tires, 16/32nds tread left and no bad wear patterns, all have even tread. $200 4. Custom off-road bumper with side guards, is made from two peices of 2x2 .120 wall tubing in the rear and 2" tube .120 wall side guards, also has a 2" receiver built into the middle which is recessed flush with the outside of the bumper. $250 or trade for nice chrome step bumper. 5. Set of 6x5.5 lug chrome blade wheels, have some rust and paint in middle is peeling and some rust. $75 6. Older model 4160 Holley 600 cfm carb, has manual choke and vacuum secondaries, ran ok but should probably be rebuilt, its got the classic finish. $50 Will ship the intake manifolds, prefer not to ship the other stuff but may be willing to work something out.
__________________
1985 Scottsdale Shortbed 4x4 Stout 350 with some "upgrades"-700r4-33x12.5" Mud Tires, Warn 8274-50 winch. 2005 Chevrolet Colorado Regular Cab 2wd 4-banger, 5 speed, Street Pack with 3.73 axle. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|