Tubular A-Arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

2low72 · 05-03-2004, 01:19 PM

has anyone installed tubular A-Arms on the 67-72 chevy trucks and if so what are some good companys to look in to. thanks

fastbagged68 · 05-04-2004, 02:23 AM

I would say Bill Turner but you will have to wait for parts and you can never get ahold of him. I might start making my own for these trucks.

phantom dually · 05-04-2004, 09:11 PM

I agree SAY NO TO TURNER. I would not send that guy another dime. He is a cheat liar and a theif.

LowSeventy · 05-05-2004, 06:30 PM

Ouch! I thought Bill Turner was doing so great with his new frames and crossmembers. What happened? I was thinking about getting that crossmember from him for my '70.

phantom dually · 05-05-2004, 09:43 PM

Turner actually started out as a great guy. I bought over 2k worth of parts from him. He took way to long to get things to you and now he cannot be reached. I sent him a set of airbags in which he offered to switch out for another style for me. Well that was over 6 months ago. I got burned for about $150 and got no call or reply. I call him atleast one time a day 5 days a week and get no answer or call back after leaving a message. I dont even care about the bags now I just want to know why he F'd me after I spent so much money with him.

*chevytruckfan* · 05-05-2004, 10:21 PM

Chassis engineering, Fatman Fabricatoins, and Heidts are all reputable companies with excellent products. Good luck on your project.

LowSeventy · 05-06-2004, 11:03 AM

Wow. Thanks Phantom, I'll be spending money with some else, not Turner Enterprises.

GMCGRANDS · 05-07-2004, 11:23 PM

I am by now means defending Bill. But from what I understand Bills wife had to have surgery, and has been in the hospital. I have bought alot from him and he is slow to build and ship. Keep in mind alot of the items he builds he customizes for his customers application. He seems to be knowledgeable and parts have been good quality. He also seems to be ahead of others with new and different items. I have had the best luck with e-mail.

65FLTC10 · 05-09-2004, 10:35 AM

Do any of you American Guyz know the story behind Chisholm Enterprises out of California?????? Years ago, they were in every "truck" mag. I bought a complete front suspension set-up from them, including tubular upper and lower A arms and then POOF!!! they disappeared?????

Roy

bossrod · 05-19-2004, 03:56 PM

Stylinconcepts out of Ohio carries DJM suspension parts. I put them on my 72' and it looks sweet! Lots of good reviews on the DJM line. Stylinconcepts has the best price

Izzy · 05-20-2004, 09:37 AM

I've got upper/lower DJM tubular arms on my wifes 98 and they fit great and aligned to stock spec.

fastbagged68 · 08-27-2004, 05:29 AM

I can get them made!

**N2TRUX** · 08-27-2004, 08:32 AM

What ever you do stay away from AIM/Chassis Tech.

XXL · 08-27-2004, 11:14 AM

Quote:

Originally Posted by fastbagged68

I can get them made!

You keep telling us this but you haven't given us any details, pricing, indication of functionality or quality, etc. Let us know this kind of information and you may have more orders than you can stand.

grnddwn · 08-27-2004, 10:55 PM

I work for Macgyvers street rod products we will have some later this year.
www.macgyvers.com

chevy69er · 09-22-2004, 06:38 AM

When u say AIM/Chassis Tech. is that the same as truckin suspension?I have some lifted tubular a-arms for my '69 from them and they seem fine..although i think their tech line sucks?What dont u like about them?

XXL · 09-23-2004, 02:44 AM

Quote:

Originally Posted by chevy69er

When u say AIM/Chassis Tech. is that the same as truckin suspension?I have some lifted tubular a-arms for my '69 from them and they seem fine..although i think their tech line sucks?What dont u like about them?

Yes, AIM operates under quite a number of dba's.

From the BBB--

This company also does business as:
A.I.M. INDUSTRIES;
AIM;
AIM - AMERICAN INNOVATIVE MANUFACTURING;
AMERICAN INNOVATIVE MANUFACTURING and
PRO TOP.

XXL · 09-23-2004, 03:05 PM

ART says they have control arm pieces in house and ready to jig up and weld. Figure 2 weeks for weld and powder coating.

Also, they expect to price these things today.

chevy69er · 09-24-2004, 01:16 AM

they told me two weeks also for my a-arms...it took them a month!To top it off they sent me the wrong bushings and sleeves and never sent instructions indicating that i need to change my cross shafts.

05-03-2004, 01:19 PM	#1
2low72 Registered User Join Date: Mar 2004 Location: Cheyenne, Wy Posts: 555	Tubular A-Arms has anyone installed tubular A-Arms on the 67-72 chevy trucks and if so what are some good companys to look in to. thanks

05-04-2004, 09:11 PM	#3
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	I agree SAY NO TO TURNER. I would not send that guy another dime. He is a cheat liar and a theif. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

05-05-2004, 09:43 PM	#5
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Turner actually started out as a great guy. I bought over 2k worth of parts from him. He took way to long to get things to you and now he cannot be reached. I sent him a set of airbags in which he offered to switch out for another style for me. Well that was over 6 months ago. I got burned for about $150 and got no call or reply. I call him atleast one time a day 5 days a week and get no answer or call back after leaving a message. I dont even care about the bags now I just want to know why he F'd me after I spent so much money with him. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

05-07-2004, 11:23 PM	#8
GMCGRANDS Registered User Join Date: Jan 2001 Location: Franklin , N.C. USA Posts: 105	I am by now means defending Bill. But from what I understand Bills wife had to have surgery, and has been in the hospital. I have bought alot from him and he is slow to build and ship. Keep in mind alot of the items he builds he customizes for his customers application. He seems to be knowledgeable and parts have been good quality. He also seems to be ahead of others with new and different items. I have had the best luck with e-mail. __________________ Mark 72'GMC Sierra Grande 2wd SWB, Fatman stageV IFS, 6.0 liter LQ4 Gen 3 and 4L80E under construction 05' GMC Sierra Denali LQ9

05-09-2004, 10:35 AM	#9
65FLTC10 Registered User Join Date: May 2004 Location: Ontario, Canada Posts: 21	Tubular Do any of you American Guyz know the story behind Chisholm Enterprises out of California?????? Years ago, they were in every "truck" mag. I bought a complete front suspension set-up from them, including tubular upper and lower A arms and then POOF!!! they disappeared????? Roy

05-04-2004, 02:23 AM	#2
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	I would say Bill Turner but you will have to wait for parts and you can never get ahold of him. I might start making my own for these trucks.

05-05-2004, 06:30 PM	#4
LowSeventy Registered User Join Date: Jul 2002 Location: Pasadena, CA Posts: 67	Ouch! I thought Bill Turner was doing so great with his new frames and crossmembers. What happened? I was thinking about getting that crossmember from him for my '70.

05-05-2004, 10:21 PM	#6
chevytruckfan Account Suspended Join Date: May 2004 Location: Lake Placid, Florida Posts: 930	Chassis engineering, Fatman Fabricatoins, and Heidts are all reputable companies with excellent products. Good luck on your project.

05-06-2004, 11:03 AM	#7
LowSeventy Registered User Join Date: Jul 2002 Location: Pasadena, CA Posts: 67	Wow. Thanks Phantom, I'll be spending money with some else, not Turner Enterprises.

05-19-2004, 03:56 PM	#10
bossrod Registered User Join Date: Feb 2004 Location: Groton, CT Posts: 168	Stylinconcepts out of Ohio carries DJM suspension parts. I put them on my 72' and it looks sweet! Lots of good reviews on the DJM line. Stylinconcepts has the best price

05-20-2004, 09:37 AM	#11
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	I've got upper/lower DJM tubular arms on my wifes 98 and they fit great and aligned to stock spec.

08-27-2004, 05:29 AM	#12
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	I can get them made!

08-27-2004, 08:32 AM	#13
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	What ever you do stay away from AIM/Chassis Tech. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-27-2004, 10:55 PM	#15
grnddwn belly dragger Join Date: Feb 2002 Location: sherwood park AB. Canada Posts: 696	I work for Macgyvers street rod products we will have some later this year. www.macgyvers.com

09-22-2004, 06:38 AM	#16
chevy69er Registered User Join Date: Feb 2003 Location: Lakewood,Ca Posts: 69	When u say AIM/Chassis Tech. is that the same as truckin suspension?I have some lifted tubular a-arms for my '69 from them and they seem fine..although i think their tech line sucks?What dont u like about them? __________________ 1969 C-20,383 stroker,sm465,custom long travel front suspension,4 wheel disc brakes,35" pro comps...mods under way include: 4x4 conversion,and custom bumpers.future mods include: gear vendors od unit,and relocation of fuel cell.



Register or Log In To remove these advertisements.

09-23-2004, 03:05 PM	#18
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	ART says they have control arm pieces in house and ready to jig up and weld. Figure 2 weeks for weld and powder coating. Also, they expect to price these things today. __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

09-24-2004, 01:16 AM	#19
chevy69er Registered User Join Date: Feb 2003 Location: Lakewood,Ca Posts: 69	they told me two weeks also for my a-arms...it took them a month!To top it off they sent me the wrong bushings and sleeves and never sent instructions indicating that i need to change my cross shafts. __________________ 1969 C-20,383 stroker,sm465,custom long travel front suspension,4 wheel disc brakes,35" pro comps...mods under way include: 4x4 conversion,and custom bumpers.future mods include: gear vendors od unit,and relocation of fuel cell.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.