![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Oct 2003
Location: San Jose Ca.
Posts: 3,335
|
Metal Fuel Line Setup Pics
I am finally getting around to removing the 8 inch run of rubber fuel hose and replacing it with metal line. I am going to go ahead and replace the entire line from the fuel pump to the fuel filter. Can someone post a pic of their setup so I can get an idea on how to run the line. Also what size fuel line will I need?
Thanks Much |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2003
Location: oregoncity,oregon
Posts: 129
|
If it is a v8 I would use 3/8 line..
![]() |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2003
Location: oregoncity,oregon
Posts: 129
|
I believe also they make those pre bent and ready to hook up, I would call an auto parts supplier and see, it sure would save you some time and frustration....
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Sep 2003
Location: Ohio
Posts: 127
|
auto zone
try this braided fuel line from auto zone $19.99
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Oct 2003
Location: San Jose Ca.
Posts: 3,335
|
Forgot to add that. It is a 350.
|
![]() |
![]() |
![]() |
#6 |
Account Suspended
Join Date: Nov 2001
Location: Oregon
Posts: 147
|
Here's a pic of an NOS piece that a friend of mine acquired. Hope this helps...
http://www.ccountry.net/~tmobrien/tr...uel%20line.jpg |
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Mar 2002
Location: Dallas, TX
Posts: 555
|
You can use steel brake line (NAPA has them premade). Mine was 5/16 for my 305V6. It worked great. Take a metal clothes hanger and bend it into the proper shape (i.e., from the pump to the carb). Cut the hanger the same lenght as the straight pre-fabed brake line and use it as a template. You will need a tubing bender.
__________________
1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|