|
|
|
06-07-2004, 05:04 PM
|
#1 |
|
love my truck
Join Date: May 2001
Location: aylmer QC
Posts: 648
|
Timing for a 350???
What should be set at?cam is edelbrock 2102 in case you need this imformation.
|
|
|
|
06-07-2004, 09:09 PM
|
#2 |
|
Senior Member
Join Date: Dec 2001
Location: Redding,CA...USA
Posts: 4,736
|
start at 10º BTDC with the vacuum advance disconnected and plugged
__________________
It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA |
|
|
|
|
06-07-2004, 09:19 PM
|
#3 |
|
Senior Member
 Join Date: Mar 2003
Location: Colfax-California
Posts: 8,630
|
With the good quality fuel lately
 I have been finding the need to turn the timing down on a couple of my trucks to keep them from pinging. My big bock is at 2btc at the moment. and my small block 400 is at 6btc
|
|
|
|
|
06-07-2004, 10:00 PM
|
#4 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
if you are running an HEI dist, i agree that 10 btdc would be a good starting point.....i am running "chit" fuel also, & set 6-8 up on my 383. The sb has an old points dist, with a Pertronics conversion & coil. there is much more mech advance in the old dist vs the HEI (20 degrees on the HEI, but i have 26 on the old dist!) I would need to time 12-14 up on an HEI, to have the total that i have on the point dist @ 6-8 up.....crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
06-07-2004, 10:04 PM
|
#5 |
|
Registered User
Join Date: Jan 2002
Location: Calgary, Alberta, Canada
Posts: 451
|
What direction do I turn the distributor to Advance timing. i.e. clockwise or counter. Second question is on the harmonic balancer timing plate, does before marks mean advanced, or the after marks?
__________________
72 C10 Cheyenne Super Full trim Factory tach dash A/C dash Factory tilt 350 / 350 power train - with Edelbrock components. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
