![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jan 2002
Location: Canton, Georgia, USA
Posts: 1,119
|
Little progress tonight
Tonight I got one side of new body mounts on the beast. Mine were in pretty rough shape, the floorboard bolts are pretty tough to deal with. What has anybody used to clean the spot welds in the recess? I guess I need to pick up a bit to use with my die grinder to clean it up. All in all it has been pretty easy to do. Looking forward to losing the top once I get both sides done.
__________________
Jeremy (NUBOMB) 72K5 CST 350/350/205 1951 Chevy 1/2 ton North Georgia Group "... And the first rule to being a man is you gotta spend your life doing crap you don't wanna do." Red Forman. |
![]() |
![]() |
![]() |
#2 |
Post Whore
![]() Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
I just used a cut wheel to carefully clean up that area after I got the bolts out. The die grinder will work fine also.
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2002
Location: Canton, Georgia, USA
Posts: 1,119
|
Thanks. Got a grinder today, but probably won't be able to finish up till Friday. Friday has been deemed "Blazer Day" for the summer.
__________________
Jeremy (NUBOMB) 72K5 CST 350/350/205 1951 Chevy 1/2 ton North Georgia Group "... And the first rule to being a man is you gotta spend your life doing crap you don't wanna do." Red Forman. |
![]() |
![]() |
![]() |
#4 |
Account Suspended
Join Date: Dec 2003
Location: Texas
Posts: 2,686
|
My spot welds broke when i tryed to impact the nuts off then i busted out the torch.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2002
Location: Canton, Georgia, USA
Posts: 1,119
|
got er done!
Finally finished up the body mounts today. Really wasn't that difficult. some suggestions would be make sure you have a cut off wheel and a die grinder. I think it would have been nice to have one of those air chisels to get at some of the spot welds. The ones in the middle of the front floorboard were difficult because of the recess for the bolt. BTW, I got the kit from Tim
Christian at the super chevy show in Atlanta. Tim was a great guy to deal with. Out with the old----In with the new.
__________________
Jeremy (NUBOMB) 72K5 CST 350/350/205 1951 Chevy 1/2 ton North Georgia Group "... And the first rule to being a man is you gotta spend your life doing crap you don't wanna do." Red Forman. |
![]() |
![]() |
![]() |
#6 |
Post Whore
![]() Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
Glad you got it done. Got mine from Tim also. My body mounts were in very bad shape and I had to straighten the rear most portion of the frame a little but other than that my swap went pretty well too. My K5 isn't roadworthy yet so have got to enjoy the new mounts yet.
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
![]() |
![]() |
![]() |
#7 |
Life is a gamble
Join Date: Oct 2003
Location: Lee's Summit, MO
Posts: 796
|
How does the ride feel now?
__________________
1970 Orange CST C-10 w/350, posi, Longbed The torpid artist seeks inspiration at any cost, by virtue or by vice, by friend or by fiend, by prayer or by wine. -- Ralph Waldo Emerson |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2002
Location: Canton, Georgia, USA
Posts: 1,119
|
It does seem a little more solid and getting rid of the old mounts eliminated some squeeks. I'm running some old tires that are past due for replacing so they probably have some flat spots. Once the painting is done, I'll get some new tires to go on 8 inch rallys. New shocks too!
__________________
Jeremy (NUBOMB) 72K5 CST 350/350/205 1951 Chevy 1/2 ton North Georgia Group "... And the first rule to being a man is you gotta spend your life doing crap you don't wanna do." Red Forman. |
![]() |
![]() |
![]() |
#9 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Those old body mount's look like the one's I took off my blazer... I replaced mine with poly...
|
![]() |
![]() |
![]() |
#10 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,477
|
![]()
U Couldn't Have Delt With A Better Man, Tim Is A Great Parts Guy.
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|