In need of 67 parts! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Inspector722 · 06-26-2004, 03:13 AM

Hey thanks for letting me join up. I have a 67 Chevy shortbed stepside with a 250 I6, 350 turbo that I am trying to get looking sharp again and I am in need of some parts. I removed the factory bed and I am installing a bed from a 1994 stepside. Most of the parts that I need are for the front half. Here is a list if some of you can help me with them. Some of this is also a wish list.

1. both doors (mine are not that bad, just wanted them nice and straight)
2. Complete master rebuild kit for 250 I6 engine
3. Two barrel intake for same 250
4. Complete a/c unit- After market maybe?
5. Billet alum. interior kit
6. Glass kit for the 2 doors from window and vent to just one large glass window.
7. Windshield
8. Clean rust free cab.
9. Alum. valve cover for 250.
10. 250 headers
11. A good place and price on getting my 250 rebuilt.
12. Black framed sliding back glass for small rear window.

Will have some nice parts left over when done will be looking to sale or trade.
Thanks again for your help.
Email Address inspector722@aol.com

krue · 06-26-2004, 04:18 AM

You can check with the vendors on the home page www.67-72chevytrucks.com for a lot of the stuff you are looking for.

LUV2XCLR8 · 06-26-2004, 08:50 AM

WELCOME 2 THE BOARD FROM W. TN. :p

jay6891 · 06-26-2004, 08:53 AM

welcome from Arkansas, can't help you on the parts, but can if you need help installing that bed.

Inspector722 · 06-26-2004, 09:25 AM

Thanks you guys, I have had that site saved in my favorites for sometime now. But I am really looking for some really good used parts to save some money for other patrs of this project. (Plus my wife has been really giving me some "HARD" looks too).

oldasme67 · 06-26-2004, 05:04 PM

hello, i am working on a 67 GMC stepside, i need a bed for it. please email me with details about yours. thanks, Bill

Inspector722 · 06-27-2004, 01:18 AM

Here are a few pics of some of the items that would have for sale or to trade.

A stepside bed from a 1967 Chevy short bed pickup. Will fit 67-72. Comes with the lights and wires. There is no floor. Only rust problem is at the front panel at the inside bottom. (The rest is only minor suface rust.) One dent ahead of the driver's tire. Tailgate and rest of the panels are straight and clean. Original paint, no bondo. Smooth fenders, not the spare tire indent in the driver side.Local pick up or can deliver for a reasonable fee.
Seat brackets, Hood (a couple of small dents but no rust), plus other parts as I pick to use or sale.

Inspector722 · 06-27-2004, 10:12 AM

Tried to upload the pics, but after 4 tries it stll will not go.

Inspector722 · 06-27-2004, 10:33 AM

Figured it out. This is the 67 Chevy bed. Best offer for sale or trade for items on my list at the top.
Thanks

Bed is Traded!

HOTFUN · 06-27-2004, 11:41 AM

I saw your 67 bed on eBay and was very interested fro my original restoration but your so far down in Southeast Texas. It looks like a nice bed for a restoration project.
Mark

Inspector722 · 06-28-2004, 06:47 PM

This is a set of seat brackets up for grabs. Out of my 67. Best offer (sale or trade) plus shipping.

Inspector722 · 06-28-2004, 10:05 PM

Smonty I sent pics in pm

Inspector722 · 06-30-2004, 01:36 AM

Smonty PMed you.

67ChevyC10Stepside · 06-30-2004, 10:18 AM

man i would kill for that bed.......but im in western PA lol

Inspector722 · 06-30-2004, 03:07 PM

67ChevyC10Stepside PMed you.

HOTFUN · 06-30-2004, 03:42 PM

How about delivery to Dallas area? I could get a connection from there to Nebraska.
HF

Inspector722 · 06-30-2004, 06:45 PM

PMed both
Hotfun &
Oldasme67

Inspector722 · 07-02-2004, 08:52 AM

TTT last time. Going to Dallas area next week, any good 67 parts to go look at in the area? In need of a core support and a passenger inner front fender for my 67.

HOTFUN · 07-05-2004, 03:29 AM

Did you get my PM about Dallas delivery as my connection will be there around the 14th. Did you come up with a price delivered there? Please PM me back.
Thanks.
Mark

Inspector722 · 07-07-2004, 09:50 AM

Still looking.

jose · 07-07-2004, 10:45 AM

Check out my for sale thread i have some of the parts you need . Jose

http://67-72chevytrucks.com/vboard/s....php3?t=110704

Inspector722 · 07-09-2004, 12:48 AM

Thanks for the update. If I can't find it a little closer, I will give you a PM.

Inspector722 · 07-21-2004, 10:42 AM

Ttt

06-26-2004, 03:13 AM	#1
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	In need of 67 parts. Can trade. Hey thanks for letting me join up. I have a 67 Chevy shortbed stepside with a 250 I6, 350 turbo that I am trying to get looking sharp again and I am in need of some parts. I removed the factory bed and I am installing a bed from a 1994 stepside. Most of the parts that I need are for the front half. Here is a list if some of you can help me with them. Some of this is also a wish list. 1. both doors (mine are not that bad, just wanted them nice and straight) 2. Complete master rebuild kit for 250 I6 engine 3. Two barrel intake for same 250 4. Complete a/c unit- After market maybe? 5. Billet alum. interior kit 6. Glass kit for the 2 doors from window and vent to just one large glass window. 7. Windshield 8. Clean rust free cab. 9. Alum. valve cover for 250. 10. 250 headers 11. A good place and price on getting my 250 rebuilt. 12. Black framed sliding back glass for small rear window. Will have some nice parts left over when done will be looking to sale or trade. Thanks again for your help. Email Address inspector722@aol.com Last edited by Inspector722; 07-21-2004 at 10:39 AM. Reason: Update

06-26-2004, 04:18 AM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	You can check with the vendors on the home page www.67-72chevytrucks.com for a lot of the stuff you are looking for. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

06-26-2004, 08:50 AM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	WELCOME 2 THE BOARD FROM W. TN. :p __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

06-26-2004, 08:53 AM	#4
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	welcome from Arkansas, can't help you on the parts, but can if you need help installing that bed. __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

06-26-2004, 09:25 AM	#5
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Thanks you guys, I have had that site saved in my favorites for sometime now. But I am really looking for some really good used parts to save some money for other patrs of this project. (Plus my wife has been really giving me some "HARD" looks too). Last edited by Inspector722; 06-26-2004 at 09:30 AM.

06-26-2004, 05:04 PM	#6
oldasme67 Registered User Join Date: Jun 2004 Posts: 1	67 Gmc hello, i am working on a 67 GMC stepside, i need a bed for it. please email me with details about yours. thanks, Bill

06-27-2004, 01:18 AM	#7
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Here are a few pics of some of the items that would have for sale or to trade. A stepside bed from a 1967 Chevy short bed pickup. Will fit 67-72. Comes with the lights and wires. There is no floor. Only rust problem is at the front panel at the inside bottom. (The rest is only minor suface rust.) One dent ahead of the driver's tire. Tailgate and rest of the panels are straight and clean. Original paint, no bondo. Smooth fenders, not the spare tire indent in the driver side.Local pick up or can deliver for a reasonable fee. Seat brackets, Hood (a couple of small dents but no rust), plus other parts as I pick to use or sale.

06-27-2004, 10:12 AM	#8
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Tried to upload the pics, but after 4 tries it stll will not go.

06-27-2004, 10:33 AM	#9
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Figured it out. This is the 67 Chevy bed. Best offer for sale or trade for items on my list at the top. Thanks Bed is Traded! Last edited by Inspector722; 07-21-2004 at 10:41 AM. Reason: Update

06-27-2004, 11:41 AM	#10
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	I saw your 67 bed on eBay and was very interested fro my original restoration but your so far down in Southeast Texas. It looks like a nice bed for a restoration project. Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

06-28-2004, 06:47 PM	#11
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	This is a set of seat brackets up for grabs. Out of my 67. Best offer (sale or trade) plus shipping. Attached Images

06-28-2004, 10:05 PM	#12
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Smonty I sent pics in pm

06-30-2004, 01:36 AM	#13
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Smonty PMed you.

06-30-2004, 10:18 AM	#14
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	man i would kill for that bed.......but im in western PA lol __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

06-30-2004, 03:07 PM	#15
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	67ChevyC10Stepside PMed you.



Register or Log In To remove these advertisements.

06-30-2004, 03:42 PM	#16
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	How about delivery to Dallas area? I could get a connection from there to Nebraska. HF __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

06-30-2004, 06:45 PM	#17
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	PMed both Hotfun & Oldasme67

07-02-2004, 08:52 AM	#18
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Core support, inner fender TTT last time. Going to Dallas area next week, any good 67 parts to go look at in the area? In need of a core support and a passenger inner front fender for my 67. Last edited by Inspector722; 07-07-2004 at 09:46 AM.

07-05-2004, 03:29 AM	#19
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Did you get my PM about Dallas delivery as my connection will be there around the 14th. Did you come up with a price delivered there? Please PM me back. Thanks. Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

07-07-2004, 09:50 AM	#20
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Still looking.

07-07-2004, 10:45 AM	#21
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	Check out my for sale thread i have some of the parts you need . Jose http://67-72chevytrucks.com/vboard/s....php3?t=110704 __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

07-09-2004, 12:48 AM	#22
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Thanks for the update. If I can't find it a little closer, I will give you a PM.

07-21-2004, 10:42 AM	#23
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Ttt

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.