![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Certified Chevy Man
Join Date: Jan 2000
Location: Tucson, Arizona, United States
Posts: 2,053
|
Cleaning engine, mainly carbon
So I tore my engine down and there is alot, when I say alot, I mean ALOT of carbon build up in the engine(stupid carburetors). What's the ebest way to clean the carbon off the pistons and heads/valves. Alos, any other good ways to clean other parts up. I'm gonna be having the block dipped I think. Thanks for any help.
__________________
68 Chevy CST (327,TH400) 3/5 drop lots of fun stuff 71 Suburban 4x4 (350,TH350) 7" lift 37's, D44/14 bolt and other sorts of goodies, lockers front and rear, flexes 40", 895 RTI score Check out my web site!!! http://www.geocities.com/cst68chevy/ |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2001
Location: Arizona
Posts: 758
|
I used some carb cleaner to clean the carbon off of my pistons and it worked pretty good. If you are taking the pistons out, you could soak them in something to soften the carbon junk before you try to scrape it off. Have fun.
Low68
__________________
Build Thread |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2001
Location: Killingworth, CT. USA
Posts: 3,378
|
If your gonna send the block in for cleaning and machining, send everything with it and let them mic things up and see what you can use over and what you should replace before you waste time and money cleaning. You may need to bore and replace pistons, rods, regrind/polish crankshaft, oil pump, camshaft, lifters, timing chain and gears, replace cam bearings, freeze plugs, recondition the heads with new valves, seats, guides, springs etc. and the list goes on.
__________________
1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03) 1998 S10 short bed 2002 S10 Blazer 1942 Oldsmobile 1958 Massey Harris Pony 1951 Wife Killingworth, Connecticut May those who love us, love us, any of those who do not love us, may God turn their hearts. And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping. A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist. |
![]() |
![]() |
![]() |
#4 |
Certified Chevy Man
Join Date: Jan 2000
Location: Tucson, Arizona, United States
Posts: 2,053
|
Well, I've already had a friend look at that's into engine and stuff. He mainly said get the block cleaned and honed, no boring as the cylinders looked really good. The engine has low miles on it and lost a valve keeper so. The valve guide is broke and I am gonna have the heads worked a little bit and a 3-angle job. Gonna throw new rings in it, might as well. And a new set of pushrods, as when the valve keep came off, the pushrod bent
![]() Thanks guys.
__________________
68 Chevy CST (327,TH400) 3/5 drop lots of fun stuff 71 Suburban 4x4 (350,TH350) 7" lift 37's, D44/14 bolt and other sorts of goodies, lockers front and rear, flexes 40", 895 RTI score Check out my web site!!! http://www.geocities.com/cst68chevy/ |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|