wtb/ 3 speed trans for 67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Johnny Outdoors · 07-14-2004, 11:00 PM

my three speed is going away
2nd and 3rd very noisy
anyone have a good one that they want to get rid of?
or that they swapped out?
thanks in advance

67ChevyC10Stepside · 07-14-2004, 11:17 PM

how much you payin?

Johnny Outdoors · 07-14-2004, 11:24 PM

how much you askin?

red71cheyenne · 07-14-2004, 11:45 PM

I have one with a tranfer case attached to it that you can have if you want to pay shipping. Jeff.

**CPNE** · 07-15-2004, 10:24 AM

A word of advise. Check which 3 speed you have. 67/68 used a shorter non-syncho'd version and 69-up used a longer synchro'd version. If you don't get one to match your existing tranny, you'lll have driveshaft and shift linkage issues to contend with.

The 67/68 one has 4 bolts on shift fork cover. The later (longer) version has 7.

JimKshortstep4x4 · 07-15-2004, 11:13 AM

Jeff,

Good observation, I did not know that.

Is there a way to tell from the outside, other than comparing the lengths?

Jim

**CPNE** · 07-15-2004, 11:17 AM

Quote:

Originally Posted by JimKshortstep4x4

Jeff,

Good observation, I did not know that.

Is there a way to tell from the outside, other than comparing the lengths?

Jim

Quote:

The 67/68 one has 4 bolts on shift fork cover. The later (longer) version has 7.

**1970 CST Short Wide** · 07-15-2004, 11:30 AM

I have a later one (longer) $50 plus shipping. Your a long way away and these are NOT light, Shipping could be costly. your call

Joe67 · 07-15-2004, 11:54 AM

I have a nice 3spd manual I pulled from a 68 truck back in 1995 or so. Still in the garage. $55 - will not ship (located near Detroit, MI)

JimKshortstep4x4 · 07-15-2004, 12:04 PM

Jeff,

Thanks, now I know the transmission that I have is the longer one!

Jim

**CPNE** · 07-15-2004, 12:05 PM

Quote:

Originally Posted by JimKshortstep4x4

Jeff,

Thanks, now I know the transmission that I have is the longer one!

Jim

No problem. I can't believe there was something I knew that you didn't. It's usually me asking you the questions.

*botboy* · 07-15-2004, 12:25 PM

If you would be willing to settle for a 4 speed, 2WD SM420, I have one out of the '67 1-ton duallie I am parting out. $75 + shipping, I'm in Delano MN 55328.

67ChevyC10Stepside · 07-15-2004, 01:02 PM

i have a 67 3 spd that i would sell as well it's the short one i think

stelth2002 · 07-15-2004, 01:48 PM

botboy, your not keeping your manual?

*botboy* · 07-15-2004, 02:34 PM

Quote:

Originally Posted by stelth2002

botboy, your not keeping your manual?

If things go as planned, next week I'll be picking up a '71 Blazer, orange and white, NP205 and SM465 and dropping the 350 and some other goodies out of my '72 and parting out the rest. Otherwise I have a guy who is selling me a '69 Longhorn and a '70 GMC, both manual trannies if I decide to continue to drive a truck. I've decided that my '72 is so badly thrashed body wise that when I get the blazer or longhorn (or both :p ) I'll be pulling the engine and a few of the nicer parts (interior, dash) then pulling and scrapping the cab, selling off the vin plate and selling the frame and drive gear.

Tx Firefighter · 07-15-2004, 02:53 PM

My local trans shop rebuilds them for 200 dollars exchange. You might check that avenue, because shipping on one of those cast iron rascals is going to cost you.

Johnny Outdoors · 07-15-2004, 10:16 PM

thanks for all the replies
ill look into maybe having mine rebuilt

HuggerCST · 07-16-2004, 10:02 AM

I hope it doesn't cost as much to rebuild yours as the last one I had rebuilt.(for work) It was in the $700 range. BTW, Kurt L has one 4 sale.

stelth2002 · 08-04-2004, 07:01 PM

i THINK i might have what you are looking for johnny, I can get a pic this weekend if your interested.

TP from Cntl PA · 08-04-2004, 08:02 PM

I got one(Late syncro 3spd out of a '69) that I'd trade even up for a wide ratio truck 4spd

07-14-2004, 11:00 PM	#1
Johnny Outdoors SOON TO BE A STEP SIDE Join Date: Apr 2004 Location: Little Valley, N.Y. Posts: 169	wtb/ 3 speed trans for 67 my three speed is going away 2nd and 3rd very noisy anyone have a good one that they want to get rid of? or that they swapped out? thanks in advance __________________ 67 CHEVY LONGBED----- BEST 51 DOLLARS EVER SPENT ON EBAY! 4.3 LITER INJECTED MOTOR WITH 5 SPEED GOING IN SOON

07-14-2004, 11:17 PM	#2
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	how much you payin? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

07-14-2004, 11:24 PM	#3
Johnny Outdoors SOON TO BE A STEP SIDE Join Date: Apr 2004 Location: Little Valley, N.Y. Posts: 169	how much you askin? __________________ 67 CHEVY LONGBED----- BEST 51 DOLLARS EVER SPENT ON EBAY! 4.3 LITER INJECTED MOTOR WITH 5 SPEED GOING IN SOON

07-14-2004, 11:45 PM	#4
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	I have one with a tranfer case attached to it that you can have if you want to pay shipping. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

07-15-2004, 10:24 AM	#5
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	A word of advise. Check which 3 speed you have. 67/68 used a shorter non-syncho'd version and 69-up used a longer synchro'd version. If you don't get one to match your existing tranny, you'lll have driveshaft and shift linkage issues to contend with. The 67/68 one has 4 bolts on shift fork cover. The later (longer) version has 7. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

07-15-2004, 11:13 AM	#6
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Jeff, Good observation, I did not know that. Is there a way to tell from the outside, other than comparing the lengths? Jim

07-15-2004, 11:30 AM	#8
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,170	I have a later one (longer) $50 plus shipping. Your a long way away and these are NOT light, Shipping could be costly. your call __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

07-15-2004, 11:54 AM	#9
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	I have a nice 3spd manual I pulled from a 68 truck back in 1995 or so. Still in the garage. $55 - will not ship (located near Detroit, MI) __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

07-15-2004, 12:04 PM	#10
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Jeff, Thanks, now I know the transmission that I have is the longer one! Jim

07-15-2004, 12:25 PM	#12
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	If you would be willing to settle for a 4 speed, 2WD SM420, I have one out of the '67 1-ton duallie I am parting out. $75 + shipping, I'm in Delano MN 55328.

07-15-2004, 01:02 PM	#13
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	i have a 67 3 spd that i would sell as well it's the short one i think __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

07-15-2004, 01:48 PM	#14
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	botboy, your not keeping your manual? __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-15-2004, 02:53 PM	#16
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	My local trans shop rebuilds them for 200 dollars exchange. You might check that avenue, because shipping on one of those cast iron rascals is going to cost you. __________________ I'm on the Instagram- @Gearhead_Kevin

07-15-2004, 10:16 PM	#17
Johnny Outdoors SOON TO BE A STEP SIDE Join Date: Apr 2004 Location: Little Valley, N.Y. Posts: 169	thanks for all the replies ill look into maybe having mine rebuilt __________________ 67 CHEVY LONGBED----- BEST 51 DOLLARS EVER SPENT ON EBAY! 4.3 LITER INJECTED MOTOR WITH 5 SPEED GOING IN SOON

07-16-2004, 10:02 AM	#18
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	I hope it doesn't cost as much to rebuild yours as the last one I had rebuilt.(for work) It was in the $700 range. BTW, Kurt L has one 4 sale. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com



Register or Log In To remove these advertisements.

08-04-2004, 07:01 PM	#19
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	i THINK i might have what you are looking for johnny, I can get a pic this weekend if your interested. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

08-04-2004, 08:02 PM	#20
TP from Cntl PA Registered User Join Date: Apr 2003 Location: Central PA....In the Berg of Nisbet Posts: 790	I got one(Late syncro 3spd out of a '69) that I'd trade even up for a wide ratio truck 4spd __________________ '72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.