![]() |
|
![]() |
#1 |
Registered User
Join Date: Sep 2000
Location: Cincinnati,OH,USA
Posts: 464
|
NP205 Rebuild 101
I have some slop and vibration from the transfer case and was looking for info about rebuilding it. Has anyone done this? Is there a good manual? Parts available? I can rotate the new driveshaft w new ujoints back and forth about a quarter turn. Is this normal? This will be a first...I redid the rearend with richmond gears and set the pinion depth and backlash to spec and it helped the clunking sound when stopping and starting alot. Gears were badly worn so I'm expecting the tranfer case to be just as worn out.
__________________
69 GMC 1 Ton Longhorn 37 Chevy Coupe |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2003
Location: Left Coast
Posts: 254
|
This might help you rebuild it...http://bulldogs-house.com/Projects/np205/
__________________
Toys: 72 K5 Blazer 74 Vette |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Jul 2004
Location: Turlock, Ca
Posts: 579
|
Excellant info !
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Apr 2004
Location: Willits Ca
Posts: 261
|
Be sure to check the spline coupling that connects the trans to the transfer case. Also trans output shaft spline, and transfer input shaft spline. You may fine allot of wear on the coupling.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Sep 2000
Location: Cincinnati,OH,USA
Posts: 464
|
Thanks alot for that link skid...nice documentation.
Jimmy72Custom Thanks for the heads up on the splines too.
__________________
69 GMC 1 Ton Longhorn 37 Chevy Coupe |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|