|
08-05-2004, 05:44 PM | #1 |
Left Foot Functioning
Join Date: May 2004
Location: Duncan, OK
Posts: 350
|
Billet Dash Question
I've seen lots of pics of billet aluminum dashes and glovebox doors. Are those things just stick-on / screw-on covers, or do they replace the factory pieces, and have mounting hardware for the gauges?
Any versions you can recommend, or that I should stay away from? Thanks...SSOW
__________________
69 C10 (#1 son's ride) 72 C20 (Dad's farm truck) 82 K30 (Ex - brush pumper project) Last edited by stickshift_or_walk; 08-05-2004 at 05:45 PM. Reason: just tweaked for recommendations |
08-05-2004, 05:53 PM | #2 |
Registered User
Join Date: Oct 2003
Location: Carmichael, California
Posts: 3,005
|
i`m going to use the set from no limit. they are the same ones they used on copperhead from the trucks show. they replace the original dash and are set up for custom gauges. don`t know what ones to stay away from but i`m sure someone here does.
__________________
Anthony |
08-05-2004, 06:05 PM | #3 |
Registered User
Join Date: Jan 2002
Location: Henderson, NV
Posts: 358
|
billet dash
There are both kinds around. The kind that just go over the stock dash- glovebox and the complete billet dash like Javy sells. As far as I know he is the only one that makes a billet glovebox door and on his last ebay sale he was asked if he had any. He said no and it sounded like he wasn't going to make anymore gloveboxes. I have the stick-on billet dash pieces and I don't like them. I just bought the complete billet dash on sale at Brothers for $190.
__________________
1980 Chevy Shortbed Pickup 1969 Z28 engine Turbo 350 |
08-05-2004, 08:43 PM | #4 | |
Registered User
Join Date: Jan 2004
Location: NH
Posts: 2,266
|
Quote:
http://www.jjengineering.us/products/products.htm If you want to see a pick there is some here of it in mine. http://67-72chevytrucks.com/vboard/s...t=garage+today
__________________
1967 C10 - SWBSS Pro Street 427sbc, 700R4 & 4.10 Gears 1948 Chevy FleetMaster Coupe, LS1, (almost done) 1950 Chevy StyleLine Coupe 250/6 3x2 Dueces 2009 Toyota Tundra 1996 Harley RoadKing "I maybe getting old, but I can still burn rubber with the best of them" |
|
08-05-2004, 06:27 PM | #5 |
SKINNY TIRES RULE!
Join Date: Sep 2001
Location: Bothell, WA
Posts: 11,038
|
There is a board member that makes very nice billet dash bezels. I have heard the NoLimit ones require some cutting to the dash and his don't. I think his name is Javier? Do a search. I think he also made matching glove box doors.
I have one that just screws on to the front of the stock bezel. You have to grind down the raised areas that say "lights" and "wipers". The fit is ok. I got it off e-bay and it looks like the same one's listed in LMC. I don't have a glove box door piece.
__________________
bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L |
08-05-2004, 06:46 PM | #6 |
Left Foot Functioning
Join Date: May 2004
Location: Duncan, OK
Posts: 350
|
Hmmm...
That helps. So there are billet covers for the plastic dash bezels available, but no word on a glovebox door cover.
Now, about the billet dashes that replace the factory plastic bezels - do they require aftermarket gauges, or will any of them accept stock gauge assemblies? Thanks...SSOW
__________________
69 C10 (#1 son's ride) 72 C20 (Dad's farm truck) 82 K30 (Ex - brush pumper project) |
08-05-2004, 07:08 PM | #7 |
Registered User
Join Date: Oct 2003
Location: Carmichael, California
Posts: 3,005
|
the no limit one does require some trimming but it`s not much and they sell a matching glove box door too. they are $180 a piece without gauges. i don`t know if stock gauges will work with them or not.
__________________
Anthony |
08-05-2004, 07:18 PM | #8 |
Account Suspended
Join Date: Feb 2004
Posts: 3,051
|
got a link for the No Limits schtuff?
|
08-05-2004, 07:19 PM | #9 |
Fixing my 67, & loving it
Join Date: Jun 2004
Location: Bridge City, Texas
Posts: 524
|
I have a few of the Polished Aluminum Dash pieces for the 67-72 Chevy truck. I am going to post a thread on the parts board. They cover the dash, ashtray, and glove box door(2 styles for glove box).
|
08-05-2004, 07:32 PM | #10 |
Young Gun wth Fast Inline
Join Date: Jan 2002
Location: Idaho
Posts: 1,475
|
Inspector, could you send me the pics of the alum dash pieces that you have. metalmile@gmail.com Thanks
__________________
1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! |
08-05-2004, 08:47 PM | #11 |
Left Foot Functioning
Join Date: May 2004
Location: Duncan, OK
Posts: 350
|
Inspector,
Those are pretty sharp. For other's convenience, here is his thread: http://67-72chevytrucks.com/vboard/s....php3?t=114559 Problem is, I've got no gauge package, so only holes for three big gauges, blinkers, and headlight - wiper switches. Anyone seen covers for that dash? SSOW
__________________
69 C10 (#1 son's ride) 72 C20 (Dad's farm truck) 82 K30 (Ex - brush pumper project) |
08-05-2004, 09:18 PM | #12 |
68 in progress
Join Date: May 2004
Location: hamilton ohio
Posts: 50
|
who sells the glove box door covers that have them cut outs like the link from the factory.
|
08-05-2004, 09:43 PM | #13 |
Registered User
Join Date: Mar 2003
Location: Bremerton, WA
Posts: 1,839
|
Here's my billet dash from Boese Engineering with Dolphin gages. No, you can't use your stock gages. Yes, you have to trim the 'ears' that support the light and wiper switch to use my bezel. I heard that Javier's didn't require this because his is 5/8" thick. Mine is 3/8" thick. Total price including gages is going to be around $500 depending on your choice of gages. Don't forget to get the correct sending units for your new gages.
__________________
Silence is golden, duct tape is silver. - Scott |
08-06-2004, 07:51 AM | #14 | |
Registered User
Join Date: Jan 2004
Location: NH
Posts: 2,266
|
Quote:
http://www.jjengineering.us/products/6772gb/6772gb.htm
__________________
1967 C10 - SWBSS Pro Street 427sbc, 700R4 & 4.10 Gears 1948 Chevy FleetMaster Coupe, LS1, (almost done) 1950 Chevy StyleLine Coupe 250/6 3x2 Dueces 2009 Toyota Tundra 1996 Harley RoadKing "I maybe getting old, but I can still burn rubber with the best of them" |
|
08-06-2004, 08:20 AM | #15 |
Fixing my 67, & loving it
Join Date: Jun 2004
Location: Bridge City, Texas
Posts: 524
|
Package deal for board members
I will take $160 for all three plus shipping.
They are polished like a mirror. The rough surface that you see is just the plastic cover on the package. Thanks, Stephen Last edited by Inspector722; 08-06-2004 at 08:28 AM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|