|
|
|
08-07-2004, 12:11 PM
|
#1 |
|
Registered User
Join Date: Jan 2004
Location: Baltimore
Posts: 2
|
found a 69
if this goes thru it will be my first truck in a looong time. i've found what looks like a 1969 3/4 ton, 2WD, 8 lug, and i think full floating rear, 8' bed, CST. some rust in the usual places and a little missing trim. interior is there but rough, frame is solid. pretty a much unmolested pickup, not bad for the east coast.
 guy wants the engine and tranny all i have to do is make an offer. i'm thinking $1,000 or less. but i am unsure and was hoping some of you might have better idea than i. -thanks |
|
|
|
08-07-2004, 12:31 PM
|
#2 |
|
Registered User
Join Date: Feb 2002
Location: Vacaville, CA
Posts: 2,746
|
I don't know about back east but around here a truck with rust, rough interior, and no engine or tranny unless it had nice sheet metal I might take it for free. I just past up a simular truck no rust, blown head gasket, work truck body guy wanted $250.
__________________
 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI |
|
|
|
|
08-07-2004, 12:48 PM
|
#3 | |
|
NOT REALLY BANNED!
 
Join Date: Jul 2004
Location: Shawnee, KS
Posts: 1,072
|
Quote:
heh, I just paid $500 for a truck that has a brand new machine shop fresh 283 and a tranny shop fresh th350, in it. The totals on the tranny and engine were over 2 grand. The downside was, the truck needs rockers, cab corners, fender patches, a new bed floor, floor pans. I did get new rockers, corners and some other new things with it tho.
__________________
1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art. |
|
|
|
|
|
08-07-2004, 02:59 PM
|
#4 |
|
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
You can always go up, start low, he may say yes
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
|
|
|
|
08-07-2004, 05:32 PM
|
#5 |
|
All Go, No Show
Join Date: Jul 2003
Location: Creighton SK
Posts: 286
|
well I bought a truck that I thought was decent, but it turns out all I am using is one front fender the whole rolling chassis and the box( which I shouldn't be keeping) and I paid $1700 for the truck, that guy likely laughed alll the way to the bank. But thanks to dubie I received a Drivers front fender, cab which needed rockers and corners, and seats and other misc all for free. It all depends on what the truck is worth to you, I'm the kid of guy who can't wait for something to go on sale I buy it right now. I'm not very good at bickering either, but the wife sure can
 Or is it dicker well whatever
__________________
69 LWB Rebuilt 283, aluminum intake, edelbrock carb, Mild Melling Cam, HEI. |
|
|
|
|
08-07-2004, 06:11 PM
|
#6 |
|
Registered User
Join Date: Jan 2004
Location: Baltimore
Posts: 2
|
thanks for all the input. i just talked to the guy and took another look at the truck he just wants to get rid of it. so i'll prob. start at $200 - $250 and see.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
