90 Suburban Project 700R4 Trouble - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ryan Flowers · 08-18-2004, 12:14 PM

Fellow gear heads,

Here is my problem: As some of you know I am trying to finish up the 90 Suburban Project. I droped in a new tranny with a 383 Stroker to turn it. I have about 1,200 miles on the tranny and now it wont come out of first gear. I have reverse and I can start it in first, second, third or Over Drive and when I try to mannualy shift it, it wont shift down. When I start out in OD and get going down the road it will not shift out of first. I was thinking it could be the Governor Gear which I have been told could cause this problem. Does anyone have an idea of what it could be?

Thanks,

patgizz · 08-18-2004, 01:29 PM

how did you adjust your TV cable?

Ryan Flowers · 08-18-2004, 02:02 PM

Patgizz,

Well I haven't jumped into the repairs yet. I have never messed with a tranny nor have I ever had any problems out of one. Can you tell me what to look for on the TV cable?

Any info would be greatly apreciated!

Thanks,

Ryan Flowers · 08-18-2004, 02:13 PM

Patgizz,

If it was a cable issue I would have found it during instalation, right? I have put 1,200 miles on it, one day turned the truck off and the next morning she wouldn't down shift out of first. I know I can manually take the TV cable linckage off at the tranny and place it into gear with my hand but I am still not sure what to look for with the cable.

Lost in the sauce, I am dipping into the cool aid and I don't even know the flavor!

KShortell · 08-19-2004, 08:36 AM

This might help you...
Throttle Valve Cable Adjustment

Jonboy · 08-19-2004, 08:50 AM

you might try the governor as well. I think they are about $60 or so at the dealership.

Ryan Flowers · 08-19-2004, 09:06 AM

KShortell,

Thanks for the link. I will give it a shot.

Jonboy,

The governor is on the outside of the transmission right?

Jonboy · 08-19-2004, 10:32 AM

Sort of. There is a circular cover about 3" around or so, towards the back. It is held on with a clip that will slide out of the way. The cover should pop off, and the governor should pull right out. This is NOT the cylinder held in with the snap ring towards the front of the trans.

Ryan Flowers · 08-19-2004, 02:23 PM

I will give the TV Cable a try this afternoon and if that's not it I will start on removeing the governor.

Again, thanks guys for all the advice.

Ryan Flowers · 08-20-2004, 12:49 PM

OK I tried the TV Cable. . . . . . Everything was fine with it so now onto the Governor. Any body have any pointers on yanking this thing out and checking it?

Thanks,

Ryan Flowers · 09-02-2004, 07:34 PM

Well I have some bad news!

The 700R4 is toasted. Gary at the tranny shop told me it was gone. Good news is GM says they will warranty it and Gary is only going to charge me $300 to do the swap.

I can not wait to get my slab poored so I can do the wrenching here at home. You never realize how much money you save until you start paying someone else to work on your truck.

I am trying to post pics of the 350 to 383 stroker swap can anyone help?

Thanks,

08-18-2004, 12:14 PM	#1
Ryan Flowers No Brakes Club Join Date: Jan 2003 Location: Carthage, N.C. Posts: 263	90 Suburban Project 700R4 Trouble Fellow gear heads, Here is my problem: As some of you know I am trying to finish up the 90 Suburban Project. I droped in a new tranny with a 383 Stroker to turn it. I have about 1,200 miles on the tranny and now it wont come out of first gear. I have reverse and I can start it in first, second, third or Over Drive and when I try to mannualy shift it, it wont shift down. When I start out in OD and get going down the road it will not shift out of first. I was thinking it could be the Governor Gear which I have been told could cause this problem. Does anyone have an idea of what it could be? Thanks, __________________ Ryan Flowers 85 GMC Suburban 4x4 379 90 GMC Suburban 4x4 383 01 Chevy Suburban 2x4 350 Click here to email me Click here to visit my web site

08-18-2004, 02:02 PM	#3
Ryan Flowers No Brakes Club Join Date: Jan 2003 Location: Carthage, N.C. Posts: 263	Patgizz, Well I haven't jumped into the repairs yet. I have never messed with a tranny nor have I ever had any problems out of one. Can you tell me what to look for on the TV cable? Any info would be greatly apreciated! Thanks, __________________ Ryan Flowers 85 GMC Suburban 4x4 379 90 GMC Suburban 4x4 383 01 Chevy Suburban 2x4 350 Click here to email me Click here to visit my web site

08-18-2004, 02:13 PM	#4
Ryan Flowers No Brakes Club Join Date: Jan 2003 Location: Carthage, N.C. Posts: 263	Patgizz, If it was a cable issue I would have found it during instalation, right? I have put 1,200 miles on it, one day turned the truck off and the next morning she wouldn't down shift out of first. I know I can manually take the TV cable linckage off at the tranny and place it into gear with my hand but I am still not sure what to look for with the cable. Lost in the sauce, I am dipping into the cool aid and I don't even know the flavor! __________________ Ryan Flowers 85 GMC Suburban 4x4 379 90 GMC Suburban 4x4 383 01 Chevy Suburban 2x4 350 Click here to email me Click here to visit my web site Last edited by Ryan Flowers; 08-18-2004 at 02:17 PM.

08-19-2004, 08:36 AM	#5
KShortell Registered User Join Date: Oct 2003 Location: Chesapeake, VA Posts: 734	This might help you... Throttle Valve Cable Adjustment __________________ Semper Paratus

08-19-2004, 08:50 AM	#6
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	you might try the governor as well. I think they are about $60 or so at the dealership. __________________ 1974 Jimmy- 5.3/4L80e/NP241

08-18-2004, 01:29 PM	#2
patgizz Registered User Join Date: Oct 2002 Location: Cleveland, OH Posts: 429	how did you adjust your TV cable?

08-19-2004, 09:06 AM	#7
Ryan Flowers No Brakes Club Join Date: Jan 2003 Location: Carthage, N.C. Posts: 263	KShortell, Thanks for the link. I will give it a shot. Jonboy, The governor is on the outside of the transmission right? __________________ Ryan Flowers 85 GMC Suburban 4x4 379 90 GMC Suburban 4x4 383 01 Chevy Suburban 2x4 350 Click here to email me Click here to visit my web site

08-19-2004, 10:32 AM	#8
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Sort of. There is a circular cover about 3" around or so, towards the back. It is held on with a clip that will slide out of the way. The cover should pop off, and the governor should pull right out. This is NOT the cylinder held in with the snap ring towards the front of the trans. __________________ 1974 Jimmy- 5.3/4L80e/NP241

08-19-2004, 02:23 PM	#9
Ryan Flowers No Brakes Club Join Date: Jan 2003 Location: Carthage, N.C. Posts: 263	I will give the TV Cable a try this afternoon and if that's not it I will start on removeing the governor. Again, thanks guys for all the advice. __________________ Ryan Flowers 85 GMC Suburban 4x4 379 90 GMC Suburban 4x4 383 01 Chevy Suburban 2x4 350 Click here to email me Click here to visit my web site

08-20-2004, 12:49 PM	#10
Ryan Flowers No Brakes Club Join Date: Jan 2003 Location: Carthage, N.C. Posts: 263	OK I tried the TV Cable. . . . . . Everything was fine with it so now onto the Governor. Any body have any pointers on yanking this thing out and checking it? Thanks, __________________ Ryan Flowers 85 GMC Suburban 4x4 379 90 GMC Suburban 4x4 383 01 Chevy Suburban 2x4 350 Click here to email me Click here to visit my web site

09-02-2004, 07:34 PM	#11
Ryan Flowers No Brakes Club Join Date: Jan 2003 Location: Carthage, N.C. Posts: 263	Well I have some bad news! The 700R4 is toasted. Gary at the tranny shop told me it was gone. Good news is GM says they will warranty it and Gary is only going to charge me $300 to do the swap. I can not wait to get my slab poored so I can do the wrenching here at home. You never realize how much money you save until you start paying someone else to work on your truck. I am trying to post pics of the 350 to 383 stroker swap can anyone help? Thanks, __________________ Ryan Flowers 85 GMC Suburban 4x4 379 90 GMC Suburban 4x4 383 01 Chevy Suburban 2x4 350 Click here to email me Click here to visit my web site

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.