1986 TPI EFI from a Chevy 350 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 10-01-2004, 03:07 PM

TPI, all sensors, harness and fuel pump/sending unit.

350.00 obro

Located in Sacramento, CA

jorgensensc · 10-02-2004, 12:01 PM

I might be interested in this setup. Can you post pics and a better description? Does it come with the distributor? More information, mileage, condition, etc please.
Shawn

*FormerMember* · 10-02-2004, 12:27 PM

Comes with the distributor. All sensors are there, the harness is intact. Motor ran strong and clean with 133K on it, knock eliminated the 350 it was sitting on.

No digital camera atm.

incoma · 10-02-2004, 11:53 PM

What about the computer?

*FormerMember* · 10-03-2004, 12:15 AM

Yep, comes with the stock computer. You'll need to re-program it.

Bhull2 · 10-03-2004, 12:36 AM

Why would the commputer need re-programming? Do the injectors come with this setup? Are the runners dented? Very interested.....

*FormerMember* · 10-03-2004, 11:22 AM

Quote:

Originally Posted by Bhull2

Why would the commputer need re-programming? Do the injectors come with this setup? Are the runners dented? Very interested.....

Usually, people remove sensors or have cams or other performance mods. This is bone stock.

No dents on the runners.

jorgensensc · 10-03-2004, 09:27 PM

Thanks for the info. Let me run it by the money manager (wife) and I will get back with you tomorrow if that is O.K.
Shawn

jorgensensc · 10-03-2004, 09:31 PM

Also, is this the speed density or the MAF system? Does it have VATS or not? Thanks again for the info.

neonlarry · 10-03-2004, 10:30 PM

1986 would be the MAF tpye, and I dont think it has the VATS.

*FormerMember* · 10-04-2004, 12:17 AM

MAF. Mr Neon is correct.

jorgensensc · 10-04-2004, 10:10 PM

Grendal,
Thanks for giving me a day to talk it over. Unfortunately it's a little more than we are able to spend right now on the truck. then the additional shipping would really put it up there. Thank you again for the information, and good luck with the sale.
Shawn

71sub · 10-14-2004, 08:09 PM

Have you sold the unit yet ?
email me: e.plascencia@comcast.net

I work in Rancho Cordova !

Thanks

Ev

*FormerMember* · 10-15-2004, 10:52 AM

Supposedly, there's a check in the mail for it.

I have to wait to find out.

71sub · 10-15-2004, 01:43 PM

Cool - could I stop by and take a look at the setup ? Maybe pick your brain some ? I need to go to EFI, since I drive my truck to and from Stockton everyday ( ~ 110 miles round trip ).

Thanks

Ev
812-5014

*FormerMember* · 10-15-2004, 01:49 PM

Quote:

Originally Posted by 71sub

Cool - could I stop by and take a look at the setup ? Maybe pick your brain some ? I need to go to EFI, since I drive my truck to and from Stockton everyday ( ~ 110 miles round trip ).

Thanks

Ev
812-5014

Sure, that's not a problem. I am dropping a Vortec into my 70 Blazer.

I have MPFI on my BBC in my C20.

I also haven't gotten the check yet...

meathead95 · 10-15-2004, 02:06 PM

i would like to see a pic of the mpfi on the bbc please

*FormerMember* · 10-15-2004, 02:13 PM

Quote:

Originally Posted by meathead95

i would like to see a pic of the mpfi on the bbc please

I can probably post 'em up on Monday or Tuesday.

meathead95 · 10-16-2004, 03:43 PM

thanks

RON WOODGEARD · 10-17-2004, 03:13 AM

If it isn't sold,, Is there anything you need or want for trade ??

*FormerMember* · 10-17-2004, 11:31 AM

Quote:

Originally Posted by RON WOODGEARD

If it isn't sold,, Is there anything you need or want for trade ??

Looking for a tilt auto column, late model (2000+) buckets seats with a console, 18" rims for an 8 lug pattern.

71sub · 10-18-2004, 02:50 PM

How can I get ahold of you and swing by this week, sometime ?

*FormerMember* · 10-18-2004, 03:11 PM

You have a PM.

Also, I have no check yet and I'd prefer to hand it off to someone instead of shipping it!

RON WOODGEARD · 10-18-2004, 07:49 PM

Quote:

Originally Posted by grendel

Looking for a tilt auto column, late model (2000+) buckets seats with a console, 18" rims for an 8 lug pattern.

None of those,, But I do have step fenders, with and without cutout, a short step bed, a short step bed for a 74 up also.. 67-72 Air dash unmolested.. a few other things I can't think of right now..

*FormerMember* · 10-19-2004, 11:43 AM

Quote:

Originally Posted by RON WOODGEARD

None of those,, But I do have step fenders, with and without cutout, a short step bed, a short step bed for a 74 up also.. 67-72 Air dash unmolested.. a few other things I can't think of right now..

The air dash is a possiblity, I don't have any SWB trucks right now...

10-01-2004, 03:07 PM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	1986 TPI EFI from a Chevy 350 TPI, all sensors, harness and fuel pump/sending unit. 350.00 obro Located in Sacramento, CA

10-02-2004, 12:01 PM	#2
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	I might be interested in this setup. Can you post pics and a better description? Does it come with the distributor? More information, mileage, condition, etc please. Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-03-2004, 09:27 PM	#8
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Thanks for the info. Let me run it by the money manager (wife) and I will get back with you tomorrow if that is O.K. Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-03-2004, 09:31 PM	#9
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Also, is this the speed density or the MAF system? Does it have VATS or not? Thanks again for the info. __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-03-2004, 10:30 PM	#10
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	1986 would be the MAF tpye, and I dont think it has the VATS. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

10-02-2004, 12:27 PM	#3
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Comes with the distributor. All sensors are there, the harness is intact. Motor ran strong and clean with 133K on it, knock eliminated the 350 it was sitting on. No digital camera atm.

10-02-2004, 11:53 PM	#4
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	What about the computer?

10-03-2004, 12:15 AM	#5
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Yep, comes with the stock computer. You'll need to re-program it.

10-03-2004, 12:36 AM	#6
Bhull2 Registered User Join Date: Jul 2000 Location: Jasper, IN Posts: 84	Why would the commputer need re-programming? Do the injectors come with this setup? Are the runners dented? Very interested.....

10-04-2004, 12:17 AM	#11
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	MAF. Mr Neon is correct.

10-04-2004, 10:10 PM	#12
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Grendal, Thanks for giving me a day to talk it over. Unfortunately it's a little more than we are able to spend right now on the truck. then the additional shipping would really put it up there. Thank you again for the information, and good luck with the sale. Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-14-2004, 08:09 PM	#13
71sub Registered User Join Date: May 2002 Location: Stockton, CA Posts: 169	Is it still available .... Have you sold the unit yet ? email me: e.plascencia@comcast.net I work in Rancho Cordova ! Thanks Ev __________________ 71 C/10 : 350 / 700r4 ; Ford 9" posi 3.50 with 31x10.5 rear tires, single drive shaft, C-notch, 2.5" drop spindles, keyless entry 71 Suburban 350/350 -- caddy tail lights, keyless entry, late model seats, billet Autometer instrument cluster 70 Ford Torino -- 351W (balanced & blueprinted ), C4, VDO gauges

10-15-2004, 10:52 AM	#14
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Supposedly, there's a check in the mail for it. I have to wait to find out.

10-15-2004, 01:43 PM	#15
71sub Registered User Join Date: May 2002 Location: Stockton, CA Posts: 169	Cool - could I stop by and take a look at the setup ? Maybe pick your brain some ? I need to go to EFI, since I drive my truck to and from Stockton everyday ( ~ 110 miles round trip ). Thanks Ev 812-5014 __________________ 71 C/10 : 350 / 700r4 ; Ford 9" posi 3.50 with 31x10.5 rear tires, single drive shaft, C-notch, 2.5" drop spindles, keyless entry 71 Suburban 350/350 -- caddy tail lights, keyless entry, late model seats, billet Autometer instrument cluster 70 Ford Torino -- 351W (balanced & blueprinted ), C4, VDO gauges

10-15-2004, 02:06 PM	#17
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	i would like to see a pic of the mpfi on the bbc please __________________ 72 2wd blazer 72 swb 4x4



Register or Log In To remove these advertisements.

10-16-2004, 03:43 PM	#19
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	thanks __________________ 72 2wd blazer 72 swb 4x4

10-17-2004, 03:13 AM	#20
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	If it isn't sold,, Is there anything you need or want for trade ??

10-18-2004, 02:50 PM	#22
71sub Registered User Join Date: May 2002 Location: Stockton, CA Posts: 169	check arrive yet ? How can I get ahold of you and swing by this week, sometime ? __________________ 71 C/10 : 350 / 700r4 ; Ford 9" posi 3.50 with 31x10.5 rear tires, single drive shaft, C-notch, 2.5" drop spindles, keyless entry 71 Suburban 350/350 -- caddy tail lights, keyless entry, late model seats, billet Autometer instrument cluster 70 Ford Torino -- 351W (balanced & blueprinted ), C4, VDO gauges

10-18-2004, 03:11 PM	#23
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	You have a PM. Also, I have no check yet and I'd prefer to hand it off to someone instead of shipping it!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.