Need Ash Tray Holder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dave3156 · 10-05-2004, 08:04 AM

I have an ash tray but I need the carrier which actually slides into the grooves. Let me know if anybody has one. Thanks.

Longhorn Man · 10-05-2004, 05:23 PM

Does your ash tray have bearings, or nylon bushings where it slides in the dash?

cdowns · 10-05-2004, 06:49 PM

what year truck

flip66 · 10-06-2004, 02:31 AM

I have one from a 72 15.00 plus the ride.

dave3156 · 10-07-2004, 08:27 PM

My original ash tray had ball bearings. The one I have now has tracks on the side and is probably the wrong one. I may need the ash tray and the carrier it sits in. The truck is a 1970 Stepside C-10. If anyone has a complete ash tray (any color) for my truck let me know. Flip66 since yours is from a 1972 it may work, but not sure. Does it have ball bearings on the side tracks? My original ash tray I sent off to Texas ("buddy's super center" on Ebay - does "rust free Texas" sound familiar?) to be chromed but never got it back. Thanks, let me know.

**Ironhorse** · 10-07-2004, 08:59 PM

I have an ashtray from a '68 GMC, burgandy in color, with the ball bearings on the side. Nice with no dents or rust. $10 plus the ride if interested drop me a PM.

dave3156 · 10-07-2004, 10:53 PM

PM sent, Thanks, Dave

10-05-2004, 08:04 AM	#1
dave3156 Registered User Join Date: Mar 2004 Location: St. Louis, MO Posts: 336	Need Ash Tray Holder I have an ash tray but I need the carrier which actually slides into the grooves. Let me know if anybody has one. Thanks.

10-05-2004, 06:49 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	what year truck __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-07-2004, 08:27 PM	#5
dave3156 Registered User Join Date: Mar 2004 Location: St. Louis, MO Posts: 336	My original ash tray had ball bearings. The one I have now has tracks on the side and is probably the wrong one. I may need the ash tray and the carrier it sits in. The truck is a 1970 Stepside C-10. If anyone has a complete ash tray (any color) for my truck let me know. Flip66 since yours is from a 1972 it may work, but not sure. Does it have ball bearings on the side tracks? My original ash tray I sent off to Texas ("buddy's super center" on Ebay - does "rust free Texas" sound familiar?) to be chromed but never got it back. Thanks, let me know. Last edited by dave3156; 10-07-2004 at 08:32 PM.

10-07-2004, 08:59 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,284	I have an ashtray from a '68 GMC, burgandy in color, with the ball bearings on the side. Nice with no dents or rust. $10 plus the ride if interested drop me a PM. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-05-2004, 05:23 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Does your ash tray have bearings, or nylon bushings where it slides in the dash?

10-06-2004, 02:31 AM	#4
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	I have one from a 72 15.00 plus the ride.

10-07-2004, 10:53 PM	#7
dave3156 Registered User Join Date: Mar 2004 Location: St. Louis, MO Posts: 336	PM sent, Thanks, Dave



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.