'68 front sheet metal & some other stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*botboy* · 10-12-2004, 06:06 PM

Hey guys got around to pulling this off of the truck and taking pictures this past weekend, now looking to sell. Have my eyes on a pretty nice '68 C/20 so every part that I don't absolutely need has got to go (I'm damn sick of driving a minivan!) That and dad isn't so keen on my own personal junkyard in the backyard...can't figure out what his problem is for the life of me

Anyways, here's some fairly straight front sheet metal from a '67 C/30 Dually that I'm parting out. I removed the bottom sheeting that you can see is rusted out on the bottom and the bottom of the actual grill has no rot or pitting. This will definitely need a new coat of paint though. You can see a couple small dents in the "inners" which could easily be pounded out (I just don't have a hammer that small

). Including fasteners, the headlight buckets, headlight doors, headlight trim rings, grille, lenses + lights and inners, I'd like to get $100 + whatever shipping costs me. Or you could pick it up in Delano, MN or Ames, IA.

Unfortunately the fenders and rad support off of this truck aren't salavageable, otherwise I'd be selling those too.

The other piece I have is a set of heater controls out of a '71 C/20, I pulled these out of a junkyard truck to install in my '72 because of how trashed the one in it was, but ultimately I gave up on the '72 project so this is for sale. Its in nice shape - all knobs there, chrome is shiny, face is undamaged and paint is in nice shape, no bends in the arms. I paid $35 for it at a local yard and would like to get $35 shipped for it.

Cethern · 10-12-2004, 10:10 PM

Are the heater controls in good shape? if so I'll take them. my zip is 80022

Thanks
Cethern

*botboy* · 10-12-2004, 10:56 PM

Quote:

Originally Posted by Cethern

Are the heater controls in good shape? if so I'll take them. my zip is 80022

Thanks
Cethern

Yeah as detailed above I bought the controls to put in my '72 since they were far nicer than what was in the truck when I bought it. I said $35 shipped so I don't really need your zip to estimate shipping cost, if you have paypal send it to botboy60 (at) hotmail (dot) com, otherwise PM me for my address and I'll take a money order.

suville · 10-13-2004, 12:33 AM

Id be interested in the H/L doors How much with shipping to 98264 Bellingham Wa.

*botboy* · 10-13-2004, 01:05 AM

For now I'm only going to be interested in selling the whole set as one...that might change later on but for now I'm holding out to sell it as a whole conversion set.

*botboy* · 10-13-2004, 01:26 PM

Climate controls sold to Cethern, grille still for sale.

jay6891 · 10-13-2004, 05:18 PM

how much for the grill, no trim and no headlight doors,no lights.

*botboy* · 10-13-2004, 05:54 PM

Quote:

Originally Posted by jay6891

how much for the grill, no trim and no headlight doors,no lights.

As I said above, if I can sell it as a whole, I'd rather do that than sell in pieces. If I decide to sell in pieces I'll let you know

10-12-2004, 06:06 PM	#1
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	'68 front sheet metal & some other stuff Hey guys got around to pulling this off of the truck and taking pictures this past weekend, now looking to sell. Have my eyes on a pretty nice '68 C/20 so every part that I don't absolutely need has got to go (I'm damn sick of driving a minivan!) That and dad isn't so keen on my own personal junkyard in the backyard...can't figure out what his problem is for the life of me Anyways, here's some fairly straight front sheet metal from a '67 C/30 Dually that I'm parting out. I removed the bottom sheeting that you can see is rusted out on the bottom and the bottom of the actual grill has no rot or pitting. This will definitely need a new coat of paint though. You can see a couple small dents in the "inners" which could easily be pounded out (I just don't have a hammer that small ). Including fasteners, the headlight buckets, headlight doors, headlight trim rings, grille, lenses + lights and inners, I'd like to get $100 + whatever shipping costs me. Or you could pick it up in Delano, MN or Ames, IA. Unfortunately the fenders and rad support off of this truck aren't salavageable, otherwise I'd be selling those too. The other piece I have is a set of heater controls out of a '71 C/20, I pulled these out of a junkyard truck to install in my '72 because of how trashed the one in it was, but ultimately I gave up on the '72 project so this is for sale. Its in nice shape - all knobs there, chrome is shiny, face is undamaged and paint is in nice shape, no bends in the arms. I paid $35 for it at a local yard and would like to get $35 shipped for it. Attached Images

10-12-2004, 10:10 PM	#2
Cethern What was I thinking?? Join Date: Dec 2003 Location: Commerce City Co Posts: 636	Are the heater controls in good shape? if so I'll take them. my zip is 80022 Thanks Cethern __________________ 72 K5 that needs lots of parts.. 71 GMC 3/4 4x4 That doesn't need much which is a good thing I don't think I could aford another money pit...

10-13-2004, 05:18 PM	#7
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	how much for the grill, no trim and no headlight doors,no lights. __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-13-2004, 12:33 AM	#4
suville Registered User Join Date: Jun 2003 Location: Mtn. Home, Idaho Posts: 906	Id be interested in the H/L doors How much with shipping to 98264 Bellingham Wa.

10-13-2004, 01:05 AM	#5
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	For now I'm only going to be interested in selling the whole set as one...that might change later on but for now I'm holding out to sell it as a whole conversion set.

10-13-2004, 01:26 PM	#6
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	Climate controls sold to Cethern, grille still for sale.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.