WTB: 3 speed column cone - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 10-14-2004, 09:56 AM

Looking for a 3 speed steering column part which I call a "cone". It's the part on the column the shifter attaches to. Would perfer only the cone and not the entire column to save on shipping costs.

Thanks.

64fleetside · 10-14-2004, 10:35 AM

I have one I saved from a 72 GMC that seemed in really good cond., how does $20 including shipping sound? Brian

**ScottH** · 10-14-2004, 12:28 PM

Brian, any chance you can send some pics?

Thanks.

SDELVY55@aol.com

racer94 · 10-14-2004, 12:31 PM

i have one if the deal falls through,although i would rather sale hole column.sellin only the cone will make the column worth squat.thanks

64fleetside · 10-14-2004, 08:23 PM

Sorry I can't post pics, a virus took out my plastic box & its only hitting on about 3 cylinders now. Its really covered in grease inside, still has the OE pin in it, OE tan 72 GMC paint, truck had around 90k miles on it & then sat for years. I got truck for the spindles & windshield. I don't care about the column value, I only pulled the stuff off of it that looked good. If your interested PM me. Brian

Brad · 10-17-2004, 05:04 PM

ScottH, I may have one back at home that I'll give you if you pay the shipping. Probably $5-8 bucks. I won't be home for another week or so and you can contact me then if you're interested.

10-14-2004, 09:56 AM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	WTB: 3 speed column cone Looking for a 3 speed steering column part which I call a "cone". It's the part on the column the shifter attaches to. Would perfer only the cone and not the entire column to save on shipping costs. Thanks.

10-17-2004, 05:04 PM	#6
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	ScottH, I may have one back at home that I'll give you if you pay the shipping. Probably $5-8 bucks. I won't be home for another week or so and you can contact me then if you're interested. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-14-2004, 10:35 AM	#2
64fleetside Registered User Join Date: Apr 2004 Location: arkieland Posts: 1,070	I have one I saved from a 72 GMC that seemed in really good cond., how does $20 including shipping sound? Brian

10-14-2004, 12:28 PM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Brian, any chance you can send some pics? Thanks. SDELVY55@aol.com

10-14-2004, 12:31 PM	#4
racer94 Registered User Join Date: Oct 2004 Location: central missouri Posts: 215	i have one if the deal falls through,although i would rather sale hole column.sellin only the cone will make the column worth squat.thanks

10-14-2004, 08:23 PM	#5
64fleetside Registered User Join Date: Apr 2004 Location: arkieland Posts: 1,070	Sorry I can't post pics, a virus took out my plastic box & its only hitting on about 3 cylinders now. Its really covered in grease inside, still has the OE pin in it, OE tan 72 GMC paint, truck had around 90k miles on it & then sat for years. I got truck for the spindles & windshield. I don't care about the column value, I only pulled the stuff off of it that looked good. If your interested PM me. Brian



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.