wtb: engine crossmember for 4x4

['71c204x4454]

looking for a 4x4 engine crossmember from a 1973-1987 to install in my 1971 4x4 for BB installation. hopefully in the northwest. Thanks.

[c-1072]

Are you sure that will work i am doing a 4x4 change over with a 69 and a 80s blazer and there is no easey way to make that work if you do please post a pic for me . Never the less if you want one i got one 25 plus shipping please note my blazer is a small block .

[1FaastC10]

i've got one too, just cut up a '79 K10 about a week ago.

['71c204x4454]

I'm talkink just the crossmember that is under the homonic balancer. None of the motor mounts. I figured I'd just cut the center out of the existing mount area and clean up the edges to be able to clear the oil pan and figured I would have to modify the cossmember to make it work but would add back some strength to that area.

[stan79chevy]

i have that old truck in the back yard thats going to be getting hauled off to the scrap yard before winter. it was a 78 k20 with a 6 cylinder. if that mount will work for you let me know.

stan

[1FaastC10]

Originally Posted by '71c204x4454

I'm talkink just the crossmember that is under the homonic balancer. None of the motor mounts. I figured I'd just cut the center out of the existing mount area and clean up the edges to be able to clear the oil pan and figured I would have to modify the cossmember to make it work but would add back some strength to that area.

i know exactly which one you're talking about, i've got one sitting in my scrap pile right now with the motor mounts still attached to it.

['71c204x4454]

Thanks 1Faastc10 but I think c-1072 is going to hook me up. Thanks everyone. When ever I'm looking for something I know I can find it here. Great place!!!