![]() |
|
![]() |
#1 |
Registered User
Join Date: Aug 2003
Location: Flower Mound Tx
Posts: 18
|
Trim Removal
I have a 68 lwb CST. I need to remove the fender emblem on both front fenders. Do I need to drop the inner fender to get to the back or do I need to loosen the fender at the bottom or top? I also need to get the clip off at the moulding. I have the moulding off, but the clip next to the door is still in. I can not reach it. Maybe lossening the fender at the bottom will give me access, unless the inner fender will give me access to both. Thanks for any help in advance.
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2001
Location: Lincoln, Nebraska
Posts: 2,145
|
I just removed the trim off my 67 and I was able to reach up through behind the fender and on the backside of the wheelhouse panel. I got them both off without removing any wheelhouse bolts and not breaking any clips. Now the bowtie 10 emblems will require the fender to be loosend away from the cowl for access.
Mark
__________________
'66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed" |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|