Tn. - Fenders For Sale

[LUV2XCLR8]

Well First Off I Want To Thank Shan Aka "Afew72's" For The Catch
He Made On My Fenders Being Wrong, I Was Not Sure, But I Am Now,
I'm Not Experianced At This Resto Stuff & Never New the Difference,
Can't Blame The Po, Not Sure He Ever Noticed Them Either, Here Is
The Deal, I Have A Set Of Near Perfect Cali 69-72 Front Fenders &
A New Set Of 68 Fenders, The Cali Fenders Have Been Bead Blasted
And Coated With Dp90 Flat Black Primer, One Of The Fenders Has A
Peice Of The Inside Of The Cup Missing, Only Rust I Have Seen, They
Are Oe Fenders And Not Repops, The 68 Fenders Were Brand New &
Are From Brother's In Cali, They've Been Gone Over By 2 Different
Body Shops And Been Coated Inside And Out With Dp90 Satin Black
Primer, They Have Only Been Test Fitted To "GQ" And Will Be Pulled
Back Off This Weekend, I Would Like To Get $100.00 For The Pair Of
69-72 Cali Fenders, And $200.00 For The Pair Of New 68's = $300.00
Which Is What I Need For A New Set Shipped To My Door, Or I Will
Trade All 4 For A New Set, Which Ever Works Best For Someone. I
Also Have A Body Shop Antenna Deleted Windsheild Cowl $50.00
Back Side Has Been Bead Blasted And Primered Flat Black Also

Please Do Not Ask Me To Split Up The Pairs As I Am In Need Of New
Fenders To Continue My Project And Need To Sell Everything.

*All Prices Are Cash And Carry, Shipping Would Be Extra, Zip 38313

[LUV2XCLR8]

69-72 Cali Left - Fenders Got Wet, Looks Like Dents, Just Leaf Marks

[LUV2XCLR8]

69-72 Cali Right - Fenders Got Wet, Looks Like Dents, Just Leaf Marks

[LUV2XCLR8]

Cali Body Shop - Antenna Deleted Windsheild Cowl

[LUV2XCLR8]

68 New Left - Other Stuff In Pic's Not For Sale

[LUV2XCLR8]

68 New Right - Other Stuff In Pic's Not For Sale

[CHEVYE]

hey craig, were you looking for oem? i`ve got 2 fenders that sat on my truck and were only mounted for fit (and fit good too) they cost 215.00 each. i would trade for your 2 sets. i want to get a 67/68 front end going. let me know, eric.

[LUV2XCLR8]

WOW, THAT SOUNDS TO GOOD TO BE TRUE, WHAT ARE THEY LIKE GM
FENDERS, REPROS MADE BY GM, NOT SURE WHAT YOU HAVE, AS YOU READ
ABOVE I COULDN'T EVEN TELL I HAD THE WRONG DAMN FENDERS PIC'S

[CHEVYE]

yeah they`re repops i had them sitting on that cab i`m building to fit up awhile back. they fit perfect. i got them at keystone automotive, i used to work there. i can put some pics up tonight if you want, but i really want to go with a 67-8 front end on my truck. i also have brand new core support and bumper/brackets too.

[LUV2XCLR8]

Originally Posted by CHEVYE

yeah they`re repops i had them sitting on that cab i`m building to fit up awhile back. they fit perfect. i got them at keystone automotive, i used to work there. i can put some pics up tonight if you want, but i really want to go with a 67-8 front end on my truck. i also have brand new core support and bumper/brackets too.

THANKS, PIC'S WOULD BE GOOD, EVEN THOUGH I TRUST YA ERIC.

AS FOR THE CORE SUPPORT AND BRACKETS, MINE ARE ALL NEW.

[CHEVYE]

here ya go. i only dragged one of em out. i can re prime them, they just look kind of shabby in the pics.

[A few 72's]

I seen them when I was there for the cook out, but did not look close or even think about them not being 69-72 fenders, so don't give me to much credit. It was only when I seen the pic's that I noticed and then I thought it was one of the secret build plans.

[LUV2XCLR8]

Hey Eric, no offense, kinda going 4 the perfect look I'd Take em as is, kinda
want them cleaned up / & primered on the outside, only because I just paid
to have all of that done and the blazer is lookin slick, just one real important
question, are they drilled for emblems, mine are not and I kind of like em that
way, have not deceided wether or not I'm gonna run my emblems or not.

Hey Shan, don't worry about it, I was going with a 67/68 nose on my last
project, considered doing it on "GQ", but my rear panels r 2 nice 2 fill in.

[CHEVYE]

i can clean em up and prime with dp 90 in an hours time, no biggie there, they do have trim holes though. just curious, what would you have to fill in to use that front end???

[LUV2XCLR8]

Originally Posted by CHEVYE

they do have trim holes though. just curious, what would you have to fill in to use that front end???

Which holes exactly

k/5 Emblem

350 Emblem

Lower trim holes

[CHEVYE]

they have 2 little holes for 350/k5 emblem back near the door. no holes for trim, i can delete the holes if you want too. are you planning on resanding the whole truck or is that dp90 primer suitable for topcoat with just scuffing? i`m just curious, if i clean the fenders up and shoot them, i have some 2k primer to coat them with.

[LUV2XCLR8]

Originally Posted by CHEVYE

they have 2 little holes for 350/k5 emblem back near the door. no holes for trim, i can delete the holes if you want too. are you planning on resanding the whole truck or is that dp90 primer suitable for topcoat with just scuffing? i`m just curious, if i clean the fenders up and shoot them, i have some 2k primer to coat them with.

OK, NOW I'M CONFUSED, I THOUGHT THE K/5 EMBLEM WAS BY THE DOOR
AND THE 350 EMBLEM WAS NEAR THE GRILL IF IT'S JUST THE K/5
HOLES THAT IS OK, MY WHOLE RIG HAS BEEN RESANDED AND PREPED W/
DP90 FOR TOPCOAT, PO HAS LIKE 100 HOURS IN FINISHSANDING ON THIS
BAD BOY, HE'S A PERFECTIONIST & USED 2 OWN A HOTROD / RESTO SHOP.

[CHEVYE]

yeah just the ones by the door. yeah, i`m a pefectionist when it comes to my truck i`m doing to, that`s why these are the only fenders i`ve kept, because i`d use them myself.

[LUV2XCLR8]

Originally Posted by CHEVYE

yeah just the ones by the door. yeah, i`m a pefectionist when it comes to my truck i`m doing to, that`s why these are the only fenders i`ve kept, because i`d use them myself.

UH, OK, HMMM, HOW WE GOING TO DO THIS SWAP, GOT ANY IDEAS

[CHEVYE]

don`t worry about delivery, i`ll take care of that. i`ll have to make an excuse to get down to tunica for a weekend or something. i can go by storey`s (our local paint supply) and get some of that dp90 and clean up the fenders and reshoot them. i`ve got a sweet new gun i haven`t got to use yet and want to try it anyway. besides i want to see that "gq" of yours anyway.

[LUV2XCLR8]

Just give me 24 hrs. notice, the best place for me to store those 68 fenders
is on the truck, that way they don't get stepped on, dropped, kicked, etc...