Tach Guage Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

avejoe · 12-18-2004, 09:51 PM

I just purchased a tach dash cluster. When I removed the tach there are two holes that appear to be for lights. The holes are just like the holes on the back of the cluster only a smaller diameter. Are bulbs supposed to be installed? If yes, does anybody have two tach bulb sockets to sell?

Thanks.

CaperCat · 12-19-2004, 12:55 AM

Once I get the gauge package. I will give you your bulbs sockets. No charge.

jc · 12-19-2004, 12:05 PM

where exactly are the holes i think allthe light sockets i have in my tack dash are the same . and i know the ones im sending to capercat are all the same.

gonebad2 · 12-19-2004, 12:59 PM

Are you talking about the holes punched in the circuit board directly behind the tach face? If these are the holes, no light goes in there. If you try putting a socket in there, it would probably damage the tach head.

avejoe · 12-19-2004, 05:45 PM

The holes are right behind the tach face. They look just like the holes for the bulb sockets. Good to know nothing goes in there.

Thanks!

12-18-2004, 09:51 PM	#1
avejoe Custer had a plan too. Join Date: Dec 2003 Location: No. California Posts: 344	Tach Dash Question I just purchased a tach dash cluster. When I removed the tach there are two holes that appear to be for lights. The holes are just like the holes on the back of the cluster only a smaller diameter. Are bulbs supposed to be installed? If yes, does anybody have two tach bulb sockets to sell? Thanks. __________________ 72 K15 GMC (aka Big White) Performance Rockers, Cab Corners, and Floors Fossil Fuel Glutton Neighborhood Nuisance 98 BMW 540i for Speed (Sold ) 05 Subaru Outback for mileage Last edited by avejoe; 12-18-2004 at 10:10 PM.

12-19-2004, 12:55 AM	#2
CaperCat Registered User Join Date: Sep 2003 Location: Concord, North Carolina 28027 Posts: 64	Once I get the gauge package. I will give you your bulbs sockets. No charge. __________________ 1971 Cheyenne 1/2 ton 2WD Long Fleet (sold) Steve

12-19-2004, 12:05 PM	#3
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	where exactly are the holes i think allthe light sockets i have in my tack dash are the same . and i know the ones im sending to capercat are all the same. __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

12-19-2004, 12:59 PM	#4
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	Are you talking about the holes punched in the circuit board directly behind the tach face? If these are the holes, no light goes in there. If you try putting a socket in there, it would probably damage the tach head. __________________ Your Bought And Sold....I Got Your Soul!

12-19-2004, 05:45 PM	#5
avejoe Custer had a plan too. Join Date: Dec 2003 Location: No. California Posts: 344	The holes are right behind the tach face. They look just like the holes for the bulb sockets. Good to know nothing goes in there. Thanks! __________________ 72 K15 GMC (aka Big White) Performance Rockers, Cab Corners, and Floors Fossil Fuel Glutton Neighborhood Nuisance 98 BMW 540i for Speed (Sold ) 05 Subaru Outback for mileage

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.