Rear Axle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BIGPIMP · 01-02-2005, 05:41 PM

to convert the rear axle over to five lugs can't i replace the axles over by using an 85 axles on my 64 c/10

Tx Firefighter · 01-02-2005, 06:52 PM

No, the earlier rearends are narrower than the later ones are and the 85 would be a 10 bolt, while your 64 should be a 12 bolt.

Easiest is to get the special 5 lug axles for your rearend. Early Classic Enterprises sells them.

You could also use a whole 71 or 72 rearend in your truck, which were 5 lug originally and coil spring too. They are slightly wider, but once under the truck, you can't really tell.

01-02-2005, 05:41 PM	#1
BIGPIMP PIMPING RIDES Join Date: Sep 2004 Location: SPRING,TEXAS Posts: 296	Rear Axle to convert the rear axle over to five lugs can't i replace the axles over by using an 85 axles on my 64 c/10 __________________ 1964 CHEVY 1/2 C/10 FLEET 1981 CHEVY 1/2 C/10 FLEET 1995 DODGE 1500 V6 FLEET EAST http://www.flickr.com/photos/bigasspimp/?saved=1

01-02-2005, 06:52 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	No, the earlier rearends are narrower than the later ones are and the 85 would be a 10 bolt, while your 64 should be a 12 bolt. Easiest is to get the special 5 lug axles for your rearend. Early Classic Enterprises sells them. You could also use a whole 71 or 72 rearend in your truck, which were 5 lug originally and coil spring too. They are slightly wider, but once under the truck, you can't really tell. __________________ I'm on the Instagram- @Gearhead_Kevin

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.