The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-06-2005, 11:14 PM   #1
mr402
Registered User
 
Join Date: Jan 2004
Location: Elmira, Oregon
Posts: 449
More on replacement seats

I've been looking locally for quite a while for late model seats. I'm finding them to be quite expensive. Best price so far is $500 for seats in so-so condition. Would cost another $300 to have them recovered. I've been looking at new aftermarket seats. 40-20-40 starting at that same $500 and going up from there depending on options. Most will ship for $85 - $100. Anyone have experience with some of the aftermarket brands? What should I watch for or stay away from?
mr402 is offline   Reply With Quote
Old 01-07-2005, 01:11 AM   #2
GlennBrittain
Senior Member
 
Join Date: Jun 2003
Location: Panola County Texas
Posts: 401
Seats

I found a set at a local wrecking yard, red 50/50 lowback buckets with a center console, in a 90 model extended cab. I did not buy them as they will have to be recovered and the frames painted. i am getting prices on recovering before I go back. Lokk at this web site for prices of new seats.

http://www.4autostuff.net/carseats/
GlennBrittain is offline   Reply With Quote
Old 01-07-2005, 01:29 AM   #3
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,281
Try looking on ebay for some 99 and up buckets. They usually run around 200-300.
Attached Images
 
__________________
Bryan

www.gmtruckshow.com

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4
5150 is offline   Reply With Quote
Old 01-07-2005, 02:11 AM   #4
GlennBrittain
Senior Member
 
Join Date: Jun 2003
Location: Panola County Texas
Posts: 401
I think I may be able to pick up the 90 seats for less than 50 each. Yours sure look good. Is the shifter on an automatic if so is it a 700R4, and what brand.
GlennBrittain is offline   Reply With Quote
Old 01-07-2005, 02:41 AM   #5
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,281
Actually those are somebodyelse's that I kept the pic because mine aren't installed yet. Here are mine that I have. $75 off of ebay.

SWEET DEAL!!!!!!
Attached Images
 
__________________
Bryan

www.gmtruckshow.com

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4
5150 is offline   Reply With Quote
Old 01-07-2005, 03:01 AM   #6
skokie
Registered User
 
skokie's Avatar
 
Join Date: Oct 2003
Location: San Jose Ca.
Posts: 3,342
I have those kinda seats in my 01 sierra. Nice seats but I like the heated leatther seats in my wifes 04 yukon better
__________________
RIP to my son Dylan. 5/17/2002 - 8/18/2018
If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started.
https://slothforpedcancer.org



68 build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=223234
skokie is offline   Reply With Quote
Old 01-07-2005, 03:14 AM   #7
4x4Poet
Registered User
 
Join Date: Nov 2004
Location: "Under Montana skies."
Posts: 1,836
I have a local AutoWorld retailer that found a line of aftermarket seats for my burbs that bolt to the oem subframe. No need for drilling, fabrication, etc. since it bolts right to the subframe that already uses the oem, reinforced captive nuts. The seats were bench buckets with a smaller center seat. Nothing real fancy about the design. Vinyl and/or velour, IIRC. I think the center seat's back folds down to make a console, but I'm not sure. I'm going off memory from 2 yrs ago. He wanted about $400 for the seat. I could ask him for the brand name and model, if you want.
__________________
'71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.

Last edited by 4x4Poet; 01-07-2005 at 03:17 AM.
4x4Poet is offline   Reply With Quote
Old 01-07-2005, 10:10 AM   #8
Jimbotronics
YA YA
 
Jimbotronics's Avatar
 
Join Date: Aug 2004
Location: Rockledge, Fl
Posts: 1,273
Hey Yellow69, those are the exact seats I have in my truck at the time being. They're ok if you're a shorter person. I'm 6' and they're not a comfortable ride for me, I feel all cramped up. Although, that was an extremely good buy though. I've seen just the jump seat go for that price.
__________________
Jimbo

'72 SWB - 350 (frame-off resto in progress - donations accepted)

'04 Chevy Avalanche

'03 Cadillac CTS (wife's ride)

Restoration progress - http://67-72chevytrucks.com/vboard/s...d.php?t=335707
Jimbotronics is offline   Reply With Quote
Old 01-07-2005, 10:16 AM   #9
67ChevyRedneck
Hittin E-Z Street on Mud Tires
 
67ChevyRedneck's Avatar
 
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
I know what you mean, I went to a yard and they wanted 350 for a crappy 94 seat. They had this sweet pimped out 04 dodge truck, totaled of course, with full leather, power, heated seat....they wanted 1200 for the seat....NO JOKE!!!
__________________
Jesse James
1967 C10 SWB Stepside: 350/700R4/3.73
1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc
1968 Pontiac Firebird: Project Fire Chicken!
2015 Silverado Double Cab 5.3L Z71
2001 Jeep Wrangler Sport 4.0L 5spd
2020 Chevrolet Equinox Premium 2.0L Turbo
2011 Mustang V6 ~ Wife's ride
American Born, Country by the Grace of God
1967 CST Shop Truck Rebuild!
My 1967 C-10 Build Thread
My Vintage Air A/C Install
Project "On a Dime"
Trying my hand at Home Renovation!
1965 Mustang Modifications!
67ChevyRedneck is offline   Reply With Quote
Old 01-07-2005, 10:40 AM   #10
gr8scott51
Registered User
 
gr8scott51's Avatar
 
Join Date: Mar 2003
Location: Bremerton, WA
Posts: 1,839
Quote:
Originally Posted by mr402
I've been looking locally for quite a while for late model seats. I'm finding them to be quite expensive. Best price so far is $500 for seats in so-so condition. Would cost another $300 to have them recovered. I've been looking at new aftermarket seats. 40-20-40 starting at that same $500 and going up from there depending on options. Most will ship for $85 - $100. Anyone have experience with some of the aftermarket brands? What should I watch for or stay away from?
Portland swap meet, first weekend in April.
__________________
Silence is golden, duct tape is silver. - Scott
gr8scott51 is offline   Reply With Quote
Old 01-08-2005, 12:56 AM   #11
mr402
Registered User
 
Join Date: Jan 2004
Location: Elmira, Oregon
Posts: 449
Portland swap meet is my annual trek to pray to the car gods. I looked pretty carefully last year but the only thing close was a 2nd row seat. Seems the odds are pretty low on finding a close color match. I might wait until April before I make a final decision though

The thing I like about the after market seats is that they will bolt to the OEM subframe. There was a post a while back that discussed the safety issues of drilling new holes and the possibility of un-reinforced floor boards collapsing. The only reason I’m really looking is because I was rear ended 2 years ago. Other car was totaled, my 71 only had about $1,200 in damage. My medical bills were over $10k and my neck still hurts. I never want to go through that ordeal again so yes, safety is a big issue for me. Besides, my wife and kids occasionally ride with me.

At any rate I was just wondering if anyone had experience with some of the after market companies before I lay down my hard earned money.
mr402 is offline   Reply With Quote
Old 01-08-2005, 01:12 AM   #12
moneyguru
Registered User
 
moneyguru's Avatar
 
Join Date: Oct 2002
Location: kalamazoo, mi
Posts: 397
Quote:
Originally Posted by mr402
Portland swap meet is my annual trek to pray to the car gods. I looked pretty carefully last year but the only thing close was a 2nd row seat. Seems the odds are pretty low on finding a close color match. I might wait until April before I make a final decision though

The thing I like about the after market seats is that they will bolt to the OEM subframe. There was a post a while back that discussed the safety issues of drilling new holes and the possibility of un-reinforced floor boards collapsing. The only reason I’m really looking is because I was rear ended 2 years ago. Other car was totaled, my 71 only had about $1,200 in damage. My medical bills were over $10k and my neck still hurts. I never want to go through that ordeal again so yes, safety is a big issue for me. Besides, my wife and kids occasionally ride with me.

At any rate I was just wondering if anyone had experience with some of the after market companies before I lay down my hard earned money.


Even if they bolt to the OEM subframe you can have the floorboard rip out if you are using seatbelts that are integrated to the seat. If you use the original lapbelt then you would be good.


hth
__________________
"Do the things you fear to do and the death of fear is certain"
moneyguru is offline   Reply With Quote
Old 01-08-2005, 01:24 AM   #13
mr402
Registered User
 
Join Date: Jan 2004
Location: Elmira, Oregon
Posts: 449
Plan is good OE seats or aftermarket. Will be putting in three point belts, not integrated. Was going to ask who makes good 3 point belts in a later post.
mr402 is offline   Reply With Quote
Old 01-08-2005, 04:25 AM   #14
4x4Poet
Registered User
 
Join Date: Nov 2004
Location: "Under Montana skies."
Posts: 1,836
My mistake. Since you've already found some aftermarket seats that bolt to the OEM seat frame, how 'bout passing on your finds? Let us know the aftermarket seat brand names. You might stir up some posts from members who recognise the brand name.

And I might learn of another seat brand I could source.
__________________
'71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.
4x4Poet is offline   Reply With Quote
Old 01-08-2005, 06:04 AM   #15
mrwilmoth
Registered User
 
Join Date: Nov 2004
Location: san bernardino, ca
Posts: 240
anyone have the oem replacement bench? the whole thing?
mrwilmoth is offline   Reply With Quote
Old 01-08-2005, 11:05 AM   #16
moneyguru
Registered User
 
moneyguru's Avatar
 
Join Date: Oct 2002
Location: kalamazoo, mi
Posts: 397
Quote:
Originally Posted by mrwilmoth
anyone have the oem replacement bench? the whole thing?

OEm replacement or factory.....I'm not sure what you are asking for..


__________________
"Do the things you fear to do and the death of fear is certain"
moneyguru is offline   Reply With Quote
Old 01-08-2005, 11:25 AM   #17
busterwivell
Registered User
 
Join Date: Jan 2002
Location: Sahuarita, AZ USA
Posts: 2,033
I got my 3 point belts at the LA Roadster show from a vendor there. When I installed them, the driver's seat wouldn't retract well. I called him and he said, "You don't still have the gas tank in the cab, do you?" I did at the time. Since I switched out the tank, they are ok. Juliano's carries the belts, too.
__________________
Bill - Tucson, AZ
47 Chevrolet 2 dr sedan
56 Chevrolet 210 2 dr sedan
66 Chevrolet Malibu 2 dr 4 speed
71 Chevrolet C30 Longhorn
86 Chevrolet Monte Carlo SS (Sold)
01 Chevrolet Tahoe
IM - BUSTERWIVE@aol.com
busterwivell is offline   Reply With Quote
Old 01-08-2005, 04:25 PM   #18
mr402
Registered User
 
Join Date: Jan 2004
Location: Elmira, Oregon
Posts: 449
I've found a few links for aftermarket seats.

http://www.atthemart.com/default.html
http://www.cksales.net/truckind.htm
http://www.newsales.com/truckind.htm

Last 2 appear to be the same.
mr402 is offline   Reply With Quote
Old 01-08-2005, 05:59 PM   #19
Already Gone
70+ ( Old Skool Club )
 
Already Gone's Avatar
 
Join Date: Nov 2003
Location: Saskatoon, Saskatchewan ,Canada
Posts: 9,139
Buckets and Console

I have a set of buckets with the console from a wrecked 96 Silverado Z71. They are the grey tweedy color that were on many trucks of that vintage in excellent shape with no rips or tears. I'd attach pics but i've got them in the back of my truck in storage for the winter but can probably get you pics if you are really interested. I want 400.00 US for them and of couse you'd have to pay the shipping from here in Saskatchewan which shouldn't be too expensive.
__________________
1972 C10 Custom/Deluxe 613 Highlander 406/700R4
1999 White Tahoe LS 4x2 with Z56 Police Package
1992 K1500 GMC Suburban

Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601

" Circumsatances Do Not Change Responsibility "

" The Sky is not the Limit, Your Mind is." Marilyn Monroe ..


RIP Charlie Watts 1941 - 2021
Already Gone is offline   Reply With Quote
Old 01-08-2005, 07:59 PM   #20
HeavyD
Senior Member
 
HeavyD's Avatar
 
Join Date: Sep 2004
Location: Wakaw, Sask, Canada
Posts: 3,180
Already Gone did you have them mounted in a 67-72 truck? If so, how did you fit (legroom etc..). I was going to have my factory seat redone in Saskatoon but might consider yours if it would work well in my truck.
__________________
"You can take the man out of PA, but you can't take PA out of the man"
HeavyD is offline   Reply With Quote
Old 01-08-2005, 09:10 PM   #21
mr402
Registered User
 
Join Date: Jan 2004
Location: Elmira, Oregon
Posts: 449
Already Gone. Sent you a PM.
mr402 is offline   Reply With Quote
Old 01-09-2005, 02:59 PM   #22
Already Gone
70+ ( Old Skool Club )
 
Already Gone's Avatar
 
Join Date: Nov 2003
Location: Saskatoon, Saskatchewan ,Canada
Posts: 9,139
They Are Loose

Heavy D, the seats are not in the truck yet they are sitting in the box. I was going to install them this spring but have decided to sell them and get what I really want is a set of seats with the attached shoulder belts from a 2000 to 2005 Silverado Extended cab, and wreckers around here want a 1000.00 for them. You realize that 400.00 US is 500.00CDN, but there would be no shipping charge as we live so close together.
__________________
1972 C10 Custom/Deluxe 613 Highlander 406/700R4
1999 White Tahoe LS 4x2 with Z56 Police Package
1992 K1500 GMC Suburban

Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601

" Circumsatances Do Not Change Responsibility "

" The Sky is not the Limit, Your Mind is." Marilyn Monroe ..


RIP Charlie Watts 1941 - 2021
Already Gone is offline   Reply With Quote
Old 01-09-2005, 04:17 PM   #23
dinnut
Registered User
 
dinnut's Avatar
 
Join Date: Apr 2003
Location: missouri city, tx
Posts: 4,486
i dont think any of yall can be my deal. last day of swapmeet. late 90s lincoln navigator leather power buckets in good shape with flip up console for 30 or 35 dollars! he said they were like 100 or more the day before i dont know if they are heated tho. i need to figure out how to wire up the power part of the seats!
__________________
70 longbed
496/th400/Ford 9"
dinnut is offline   Reply With Quote
Old 01-09-2005, 04:27 PM   #24
rennspd
Registered User
 
Join Date: Mar 2003
Location: Gulf Breeze Florida
Posts: 101
I bought these on e-bay for $40 plus $65 shipping! not bad at all especially for the price!
Attached Images
 
__________________
71 swb c-10
rennspd is offline   Reply With Quote
Old 01-09-2005, 07:08 PM   #25
Huck
Senior Member
 
Huck's Avatar
 
Join Date: Jun 2001
Location: Shelbyville, KY
Posts: 3,269
Have these Buick Park Avenue all power and nice soft leather!! $450.+ship
Attached Images
 
Huck is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:14 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com