side tool box door?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**'70_402** · 01-10-2005, 04:22 PM

can you buy a new door the side of bed tool box that were on our trucks??? i know it is a hard part to find rust free....does anyone make a replacement? or am i just screwed untill i find one or use the bondo on it????

Putter · 01-10-2005, 04:35 PM

I just freaking saw one (new one), and I am trying to relocate it. It'll come to me where I saw it. I remember it came with hinges and everything......

**'70_402** · 01-10-2005, 04:56 PM

that would be really nice. i wonder how much it was?

Putter · 01-10-2005, 05:20 PM

I can not remember. I have a stepside, so I didn't need to look at pricing. I remember flipping through a catalog, but I don't remember whos. I know it is on top of my dresser right now. It will be in the morning before I can post where I found it. (I only get online at work......I'm cheap that way)

Bob Moore · 01-10-2005, 05:33 PM

I found one in Brother's Catalog - an older one 3with the Orande Cameo on the cover. $299.95 complete - hinges, latch, catch, cable - done in fiberglass. No mention of the interior box or mounting hardware.

Putter · 01-10-2005, 05:41 PM

That may be the one I saw, but mine is a catalog that is only a couple months old at most.

mtdave2 · 01-11-2005, 01:54 AM

i would love to find one of those my self. im sure those doors are the single most rust prone spots on these trucks.. ugh!

Putter · 01-11-2005, 09:48 AM

Okay, the one I saw was in my most current Brother's catalog. They are showing it as follows:

67-72 Factory Bedside Toolbox Door (picture shows door, latch, hinges, and cable to prevent it from swinging open too far)

Part Number: TBD0072

Price: (sit down first) $299.00

**'70_402** · 01-11-2005, 10:26 AM

thanks putter. i will have to look at my catalog..

Putter · 01-11-2005, 11:01 AM

If it's the catalog with the silver late-50's burb on it, then look on page 83...bottom of page, left side.

01-10-2005, 04:22 PM	#1
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	side tool box door?? can you buy a new door the side of bed tool box that were on our trucks??? i know it is a hard part to find rust free....does anyone make a replacement? or am i just screwed untill i find one or use the bondo on it???? __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

01-10-2005, 04:35 PM	#2
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	I just freaking saw one (new one), and I am trying to relocate it. It'll come to me where I saw it. I remember it came with hinges and everything...... __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

01-10-2005, 04:56 PM	#3
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	that would be really nice. i wonder how much it was? __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

01-10-2005, 05:20 PM	#4
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	I can not remember. I have a stepside, so I didn't need to look at pricing. I remember flipping through a catalog, but I don't remember whos. I know it is on top of my dresser right now. It will be in the morning before I can post where I found it. (I only get online at work......I'm cheap that way) __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

01-10-2005, 05:33 PM	#5
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Tool Box Door I found one in Brother's Catalog - an older one 3with the Orande Cameo on the cover. $299.95 complete - hinges, latch, catch, cable - done in fiberglass. No mention of the interior box or mounting hardware. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

01-10-2005, 05:41 PM	#6
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	That may be the one I saw, but mine is a catalog that is only a couple months old at most. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

01-11-2005, 01:54 AM	#7
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	i would love to find one of those my self. im sure those doors are the single most rust prone spots on these trucks.. ugh! __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

01-11-2005, 09:48 AM	#8
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Okay, the one I saw was in my most current Brother's catalog. They are showing it as follows: 67-72 Factory Bedside Toolbox Door (picture shows door, latch, hinges, and cable to prevent it from swinging open too far) Part Number: TBD0072 Price: (sit down first) $299.00 __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

01-11-2005, 10:26 AM	#9
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	thanks putter. i will have to look at my catalog.. __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

01-11-2005, 11:01 AM	#10
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	If it's the catalog with the silver late-50's burb on it, then look on page 83...bottom of page, left side. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.