ride hieht - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ricecop425 · 01-21-2005, 03:17 AM

how do i adjust the psi in the bag for ride hieght, new to this game. can you help me out, haha. i feel so stupid, haha.

bagged72blaz · 01-21-2005, 03:19 AM

Depending on your set-up you usually use 2way momentary toggle swithes. But there are many ways and many different set-ups. Programmable set-ups etc.....

ricecop425 · 01-21-2005, 03:28 AM

so it just depends on my pressure switch pretty much then right? well my pressure switch is 110-140 but my bags are rated at 120 psi, i got the conitech 2600 single port 1/2". will those bags work at 140 psi or what?

bagged72blaz · 01-21-2005, 03:35 AM

They should but if your tanks have 140 psi after inflating 2 bags say you'll only have around 100 in the bags. But I've ran 160 psi in my rear firestones that are rated at 100psi with a trailer on with no problems. Not smart though. I'm getting Slam Specialties ES-72 bags handle 240 psi. If your tanks have 140, your bags can have any amount up to that psi.

ricecop425 · 01-21-2005, 03:39 AM

ok right on man, thanks, i wasn't sure that is what i was thinking but didn't want to get into it and reliese it cuz i am installing them this next week. i am stoked. thanks for the help once again man

01-21-2005, 03:17 AM	#1
ricecop425 carl Join Date: Nov 2004 Location: seattle Posts: 190	ride hieght how do i adjust the psi in the bag for ride hieght, new to this game. can you help me out, haha. i feel so stupid, haha. Last edited by ricecop425; 01-21-2005 at 03:39 AM. Reason: spelling

01-21-2005, 03:19 AM	#2
bagged72blaz Got L.E.D.s Join Date: Dec 2004 Location: Craig Co. Posts: 195	Depending on your set-up you usually use 2way momentary toggle swithes. But there are many ways and many different set-ups. Programmable set-ups etc..... __________________ Bagged 1972 2wd Blazer http://www.earlyclassic.com/home.aspx

01-21-2005, 03:28 AM	#3
ricecop425 carl Join Date: Nov 2004 Location: seattle Posts: 190	so it just depends on my pressure switch pretty much then right? well my pressure switch is 110-140 but my bags are rated at 120 psi, i got the conitech 2600 single port 1/2". will those bags work at 140 psi or what? __________________ a man and his truck, such a beautiful thing

01-21-2005, 03:35 AM	#4
bagged72blaz Got L.E.D.s Join Date: Dec 2004 Location: Craig Co. Posts: 195	They should but if your tanks have 140 psi after inflating 2 bags say you'll only have around 100 in the bags. But I've ran 160 psi in my rear firestones that are rated at 100psi with a trailer on with no problems. Not smart though. I'm getting Slam Specialties ES-72 bags handle 240 psi. If your tanks have 140, your bags can have any amount up to that psi. __________________ Bagged 1972 2wd Blazer http://www.earlyclassic.com/home.aspx

01-21-2005, 03:39 AM	#5
ricecop425 carl Join Date: Nov 2004 Location: seattle Posts: 190	ok right on man, thanks, i wasn't sure that is what i was thinking but didn't want to get into it and reliese it cuz i am installing them this next week. i am stoked. thanks for the help once again man __________________ a man and his truck, such a beautiful thing

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.