Parting out 1972 K5 Blazer

[mikeperez22]

Hi all,

I have a 1972 Blazer with a clear title that I bought about 6 months ago to do a full restoration. My job situation has changed (for the better) and I am not able to continue this project for now. Everything is in a warehouse in Del Rio, TX. I am not currently in Del Rio, so I only have the pictures that I have. Also, it will take some time and coordination to get out to Del Rio to arrange shipping or pickup of the parts. This is what I have:

1972 Blazer tub on a rotisserie- rockers are gone, and a little rust to the bottom of the bedsides, there is a dent to the left bedside. The tub comes with new inner and outer rockers and 4 bedside repair panels that cover the full bedsides. It also needs a few small patches here and there, but the floors are solid with the exception of the last few inches of the bed floor. I also have repair panels to fix that as well. It has an A/C dash. The radio opening unfortunately was hacked on by the previous owner.

Frame that has been blasted and painted with Eastwood rust inhibiter primer and then covered with Eastwood Chassis black. Looks great. Frame is straight. The crossmembers have not been blasted or painted yet.

I have both doors with all of the mechanicals still inside. both doors have some rust on lower edges. I also have a tailgate in overall good shape with a little rust on the lower inside edge.

Doube wall top in good condition. Needs to be refinished and the liftgate has a crack on the inside where the T-handle goes through (I think this is pretty common). Glass is excellent.

I have all of the running gear including: 350 V8, Turbo 350 tranny, NP205 transfer case, front and rear driveshafts, Dana 44 front, and 12 bolt rear. Both axles are dissasembled. The rear has posi. I also have 4 original leaf springs.

I also have a couple of extra things such as a 400ci short block, steel heads for the 400, and aluminum intake.

This is what I don't have:
Gas tank, bumpers, seats (although I do have the front brackets), console, hood, front fenders (inner or outer), shocks, fuel and brake lines.

If you need anything that I am not thinking of, let me know and we will work out a price. As for what I do know:

Tub w/rotisserie and patch panels- $1000 (rotisserie alone cost $600 to build)

Frame w/ crossmembers-$300

Small block 350 (probably original engine) - $250

Double wall top - $250

Make offers on everything else. EVERYTHING IS DISSASEMBLED. THIS INCLUDES AXLES. KEEP IN MIND IT MAY TAKE A FEW WEEKS BEFORE I CAN MAKE IT OUT TO DEL RIO AND PICK IT ALL UP. I DO HAVE A CONTACT OUT THERE WHO WILL BE WILLING TO HELP IF YOU'D LIKE TO PICK ANYTHING UP, BUT I AM NOT GOING TO MAKE HIM PACK AND SHIP ANYTHING, SO PLEASE BE PATIENT. I have some digital pics on my computer, so if you'd like pictures of anything, I will see what I have. Please email me at mikeperez22@hotmail.com or shoot me a PM with pic requests or offers. Thanks.

[bouncytruck]

How much for the front seat brackets?

[mikeperez22]

I'll take $25 bucks plus shipping. It is going to be a two to three weeks before I can get out to Del Rio and ship them. Let me know.

[ebfabman]

How much for the liftgate off the top? How much for the tailgate?

[6t727t2]

Please put me next in line for the seat brackets if bouncy passes.

[mikeperez22]

I don't really want to separate the liftgate off of the top because I don't think anyone would want just the top. I will make an exception for $200, but I'd rather keep together. You are second in line on the tailgate. I'll email the other guy and make sure he wants it. Otherwise, you can have it for $75 plus shipping.

[LUV2XCLR8]

JACK W/ HOLD DOWN SPRINGS / CLIPS

TIRE IRON W/ HOLD DOWN SPRINGS / CLIPS

CONDITION / PIC'S OF THE ABOVE ITEMS

[mikeperez22]

Sorry,

The jack and spring were not installed when I bought the truck.

[thekidd]

Brackets for holding rear panels in place?

[bakersfield b0mber]

what is the condition of the top do you have photos?

[mikeperez22]

Kidd,

I do have the brackets. I'll take $25 for all of them plus shipping.

Bakersfield,

PM me your email address and I'll send you pictures. It is in good shape overall. It needs to be refinished and the crack in the tailgate needs to be repaired, but it is solid overall with good glass.

[thekidd]

Pmed ya.

[crispy]

hi, congratulations on the new job... if you have them, how much for the brackets that hold down the rear seat? i'd like those if possible.

[72CSTC5]

I am interested in maybe the rotisserie that your blazer tub is on. Do you have that for sale by itself. Let me know. Thanks

[bouncytruck]

PM sent.

[mikeperez22]

I don't have the any of the tailgate hardware or any of the brackets for the rear seats. Skii - I think you are number 2 for the posi-trac. I haven't heard anything for certain from the other guy. I'll let the posi go for $100.

72CST - I built the rotisserie and it is set up for a blazer tub. I'll let it go for $500. It will have to be picked up. It is extremely large and heavy.

[72CSTC5]

Mike perez, I am interested in the rotisserie. Do you have any pictures of it possibly so I can see it and how hight the blazer tub sits on it when mounted. Email me pictures at cbernal1972@hotmail.com

[72CSTC5]

Mike I want the rotisserie. Let me know what weekend you can be to your place so I can make plans to drive out and pick it up. It will fit on a trailer correct? You can email me again at the previous email address. Thank you.

[teamharvey]

Price and condition on console, radio, outer grille, and all seatbelts.

Thanks,
Bret

[mikeperez22]

The rotisserie will fit on a trailer. The middle beam will slide into each end making the entire thing only 8 ft long or so. I will let you know what weekend as soon as I know. It may have to be on a Sunday. I'll have to arrange to lift the body off if know one has purchased it yet.

Mike

[mikeperez22]

I don't have a console, radio, or seatbelts. I planned to use newer seats with built in seatbelts. I do have an outer grill. It has some small dents. I'll let it go for $30 plus shipping.

[Chevy Muscle]

Put me next in line for the posi carrier. What gear ratio is in it?

.... sounds like someone else is gonna get it anyway.


how much for the 400sb?

[72CSTC5]

Let me know Mike when you can meet me. I am just going to make a weekend trip out of it with my girlfriend so Sunday is okay. Maybe kind of early since it is a 7 hour drive. Thanks

Carlos

[mikeperez22]

Carlos, I will be in Del Rio on Sunday, February 20th. It might take me a few hours to get the tub off of the rotisserie, so I will get there late Saturday night. I would plan to get there sometime between 11 and 12. I give you directions and my phone number a week or so before the 20th.

Mike

[mikeperez22]

Everybody,

I will be in Del Rio, TX on Sunday, February 20th. Everything will either be boxed and shipped or sent to the junkyard by that night. If you need to pick up anything that you purchase, plan on coming that day or feel free to come earlier if you are buying one of the large items (top, tub, doors, tailgate, engine, tranny, t-case) . I will ship everything that is shippable during the first few days of that week.

Mike