72 Custom/10 deluxe for sale nice and fast. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bmg72 · 01-31-2005, 07:44 PM

Custom 10 deluxe for sale ,2wd long box.. This truck came from Oklahoma and only has 67,000 miles. It has some light surface rust here and there but no major problems. The driver side cab corner has a small pinhole but that is the worst of the rust. The cab corners and rocker panels are original along with most of the sheet metal. Here’s what it has for options: A/C( R-12), Auto, sway bar on the front, 3.73 posi, PS, PB, tilt wheel, and a strong 350 V-8. The engine compartment has been detailed; I also cleaned and paint the frame. I’ve replaced many parts and I only used the best. Some of the following I’ve replaced: four core radiator, water pump, fuel pump, hoses, front and rear sway bar bushings, rear control arm bushings, brakes, high power alternator, shocks, A/C compressor hoses and o-rings, battery, u-joints, and carrier. Any bolt or nut that I touched I replaced with stainless steel. This truck runs and drives awesome; I spared no expense, much to my wife’s dismay. Now for the good stuff, this is what I did to the engine. I have all the receipts for the machine work and parts. The block was bored .030 over, aligned bored, blue printed and balanced. The rods were reconditioned. The pistons are hypertech 10:1 trw’s. The heads are aluminum Edelbrock RPM’S. The cam is a Comp’s roller cam with full roller rockers. Timing chain is true roller Mildoen and cover. Oil pan is a Moroso baffled pan. Headman ceramic coated header with 2 ½ flow master exhaust. New HEI. Edelbrock carb. and RPM intake. New cast steel Scat crank. And probably more. The problems with the truck are few and minor, dent in the tailgate( I do have a spare), passenger side door is from a 71, small dent in front bumper, minor body work on rear panel, and when it sits for awhile the rear main drips a couple of small drops of oil. If you have any questions or want more pictures please e-mail me at brimgeorge@msn.com. Thanks Brian. The price $6800 or offer. This truck is very fast.

**john** · 01-31-2005, 07:50 PM

LUV2XCLR8 · 01-31-2005, 07:50 PM

QKENUF4U · 01-31-2005, 09:59 PM

pics to smelan656@cs.com
thanks
lance

01-31-2005, 07:44 PM	#1
bmg72 Registered User Join Date: Sep 2002 Location: iowa Posts: 14	72 Custom/10 deluxe for sale nice and fast. Custom 10 deluxe for sale ,2wd long box.. This truck came from Oklahoma and only has 67,000 miles. It has some light surface rust here and there but no major problems. The driver side cab corner has a small pinhole but that is the worst of the rust. The cab corners and rocker panels are original along with most of the sheet metal. Here’s what it has for options: A/C( R-12), Auto, sway bar on the front, 3.73 posi, PS, PB, tilt wheel, and a strong 350 V-8. The engine compartment has been detailed; I also cleaned and paint the frame. I’ve replaced many parts and I only used the best. Some of the following I’ve replaced: four core radiator, water pump, fuel pump, hoses, front and rear sway bar bushings, rear control arm bushings, brakes, high power alternator, shocks, A/C compressor hoses and o-rings, battery, u-joints, and carrier. Any bolt or nut that I touched I replaced with stainless steel. This truck runs and drives awesome; I spared no expense, much to my wife’s dismay. Now for the good stuff, this is what I did to the engine. I have all the receipts for the machine work and parts. The block was bored .030 over, aligned bored, blue printed and balanced. The rods were reconditioned. The pistons are hypertech 10:1 trw’s. The heads are aluminum Edelbrock RPM’S. The cam is a Comp’s roller cam with full roller rockers. Timing chain is true roller Mildoen and cover. Oil pan is a Moroso baffled pan. Headman ceramic coated header with 2 ½ flow master exhaust. New HEI. Edelbrock carb. and RPM intake. New cast steel Scat crank. And probably more. The problems with the truck are few and minor, dent in the tailgate( I do have a spare), passenger side door is from a 71, small dent in front bumper, minor body work on rear panel, and when it sits for awhile the rear main drips a couple of small drops of oil. If you have any questions or want more pictures please e-mail me at brimgeorge@msn.com. Thanks Brian. The price $6800 or offer. This truck is very fast.

01-31-2005, 07:50 PM	#2
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	__________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

01-31-2005, 07:50 PM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	__________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-31-2005, 09:59 PM	#4
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	pics to smelan656@cs.com thanks lance



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.