Rockwell/NP205 T-Case Swap Q? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyK20 · 05-31-2002, 09:58 PM

I am going to be replacing my Rockwell Tranfer Case with an NP205. Does anyone know if the Transmission to Transfer Case adaper sleeve is the same for both T-Cases? Also, will the drive shaft length need to be changed?

Brian19692 · 06-01-2002, 12:02 AM

I don't think the sleeve is the same but I can't remember for sure. The shafts need changed. I changed my 4-speed 4x4 over a few months ago. I had to move the t-case mount and cut a new hole in the floor for the shifter. I had the rear shaft shortened and used the front shaft from the 71 4x4 parts truck.

05-31-2002, 09:58 PM	#1
HeavyK20 Registered User Join Date: Dec 2001 Location: New Richmond, WI Posts: 547	Rockwell/NP205 T-Case Swap Q? I am going to be replacing my Rockwell Tranfer Case with an NP205. Does anyone know if the Transmission to Transfer Case adaper sleeve is the same for both T-Cases? Also, will the drive shaft length need to be changed? __________________ Eric 1969 K20, 465/205 package

06-01-2002, 12:02 AM	#2
Brian19692 Registered User Join Date: Feb 2001 Location: Des Moines, IA. Posts: 188	I don't think the sleeve is the same but I can't remember for sure. The shafts need changed. I changed my 4-speed 4x4 over a few months ago. I had to move the t-case mount and cut a new hole in the floor for the shifter. I had the rear shaft shortened and used the front shaft from the 71 4x4 parts truck. __________________ 67 short 2wd. FOR SALE 69 long box w/72 grill 69 Camaro 327 4-speed Des Moines, Iowa

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.