![]() |
|
![]() |
#1 |
Registered User
Join Date: Oct 2003
Location: San Jose Ca.
Posts: 3,335
|
Booster brackets
I saw a post on here a few months ago with pics on where they go on the mastercylinder, booster and firewall but I cant locate the post. If anyone has it bookmarked can you post it here?
Thanks
__________________
RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234 |
![]() |
![]() |
![]() |
#2 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
That was probably a 71/72...they have brackets while the older ones don't.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2004
Location: Canton North Carolina
Posts: 466
|
The round rod attachs to the back of the booster off of the lower left mounting bolt that holds booster to the bracket and attaches to the upper stud for the e- brake. The flat bracket attaches to the left stud on top of the M/C flange- order from outside in- bracket, prop valve backet, M/C flange. The other end of the flat mounts to spot above the flange that holds the steering column in place (one bolt at 12 o'clock -flange mounts here bolt is about 1.5 inches long- and one at approx.4 o'clock, bolt is about 1 inch long. Hope this helps.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|