72 K5 Blazer Project 4 Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

junkyardjohn · 03-02-2005, 07:59 PM

I HAVE A 72 K5 BLAZER FOR SALE, THAT I PICKED UP IN A SWAP. AS IT SITS IT HAS A 350/ SM465 /NP205 COMBO. THE MOTOR HAS BEEN SEALED & HAS A NEW EDELBROCK PERFORMER RPM MANIFOLD. IT HAS BFG ALL TERRAIN RADIAL TAs ON IT THAT ARE LIKE NEW. IT HAS NO TOP, ROLL BAR OR SEATS. THE MOTOR NEEDS HOSES , BELTS , AN EXHAUST SYSTEM & A CARB. & DISTRIBUTER. I NEED $1600 THE WAY IT SETS, OR $1000 WITHOUT THE MOTOR & TIRES.

JOHN

72gord · 03-02-2005, 08:16 PM

sending pm

donkey69 · 03-02-2005, 11:44 PM

Wow-that is one nice looking project,John! If only a guy could take a week off work I'd hook on the car trailer and Road Trip!!

junkyardjohn · 03-03-2005, 02:31 PM

Thanks... This Blazer Has A Little Rust, But The Rocker Boxes & The Windshield Ring Are Super Solid. As An Incentive, I'll Throw In A Perfect,rustfree Set Of Fenders & Hood For An Additional $100

John

Trifelynn · 03-03-2005, 02:38 PM

Where is the rust at?

Any pics of the rust?

junkyardjohn · 03-03-2005, 03:02 PM

YEP.. RUST IS IN THE TYPICAL SPOTS FOR THESE TRUCKS, BUT IS VERY REPAIRABLE. MOST OF THE RUST IS IN THE FLOORBOARDS & ON THE SIDES RIGHT BEHIND THE DOORS. THE P.O. HAS CUT THE RUST OUT OF THE DRIVERS SIDE FLOORBOARD IN ANTICIPATION OF THE PATCH PANELS. ALSO I HAVE ROCKER PANEL & FLOORBOARD PATCH PANELS THAT I WILL INCLUDE FOR FREE. JOHN
__________________
CAN'T SEEM TO BE ABLE TO POST PIC.S . IF YOU P.M. ME WITH YOUR EMAIL ADDRESS , I'LL SEND YOU SOME PICS OF ALL THE RUST.

JOHN

Americanrider · 03-04-2005, 06:58 AM

Will you sell the motor?

junkyardjohn · 03-04-2005, 03:45 PM

Quote:

Originally Posted by Americanrider

Will you sell the motor?

PROBABLY ... P.M. ME & WE WILL DISCUSS IT. JOHN

LUV2XCLR8 · 03-04-2005, 04:49 PM

MAN, I NEED THAT FOR A GOOD DAILY DRIVER, FINISH IT, WHY

junkyardjohn · 03-04-2005, 06:15 PM

Quote:

Originally Posted by LUV2XCLR8

MAN, I NEED THAT FOR A GOOD DAILY DRIVER, FINISH IT, WHY

LUV...... IF THIS TRUCK WAS NEXT TO BE RESTORED, OR EVEN SECOND OR THIRD, I'D KEEP & FINISH THIS SUCKER IN A HEARTBEAT. I JUST HAVE TOO MANY PROJECTS, & NOT ENOUGH TIME OR MONEY.

JUST TRYING TO BE A LITTLE REALISTIC HERE....... BUT THIS BLAZER WOULD SURE LOOK GOOD ON YOU.

JOHN

*dtlilly* · 03-04-2005, 09:44 PM

I too can see Craig driving this around W. Tennessee while he's restoring and putting together GQ.

teeitup · 03-05-2005, 12:33 AM

John, any idea how I could get it to KANSAS???? I'll pm you Sat, I just got home and need some sleep. Thanks Randy

crews · 03-05-2005, 01:10 AM

Whats the louvered hood in the back of it for?????

junkyardjohn · 03-05-2005, 01:16 AM

Quote:

Originally Posted by crews

Whats the louvered hood in the back of it for?????

THATS FOR MY 1 TON TOWTRUCK. IT'S A 69 WITH A 67 FRONT CLIP.

JOHN

crews · 03-05-2005, 01:19 AM

I knew you had good taste John....

junkyardjohn · 03-05-2005, 01:19 AM

Quote:

Originally Posted by teeitup

John, any idea how I could get it to KANSAS???? I'll pm you Sat, I just got home and need some sleep. Thanks Randy

SORRY RANDY.. DON'T PLAN ON GOING EAST ANY TIME SOON.

JOHN

junkyardjohn · 03-05-2005, 12:03 PM

Quote:

Originally Posted by teeitup

John, any idea how I could get it to KANSAS???? I'll pm you Sat, I just got home and need some sleep. Thanks Randy

RANDY..BRING YOUR TRAILOR UP & WE'LL LOAD YOU UP WITH DOORS,FENDERS, HOODS & GRILLS.

JOHN

mcmlxix · 03-05-2005, 01:48 PM

john,
If I can convince the wife, I would be interested in the truck... what about getting it to North Las Vegas? 89130??
Would you be interested in a trade for a C30 rolling dually chassis?? 157" wheel base. (included fuel tank under passanger side rail) Originally a 60k mile motor home. I still have to remove the drive train and cab for my other projects....

junkyardjohn · 03-05-2005, 09:36 PM

I'M NOT REALLY INTERESTED IN A TRADE, BUT I MAY BE ABLE TO GET IT DELIVERED FOR ABOUT 90 CENTS OR A DOLLAR A MILE.

JOHN

teeitup · 03-05-2005, 11:53 PM

I wonder if I can get anybody to haul it to Idaho Falls, Idaho from your place John? I have a nice member who would get it Denver for me from there. PLEASEEEEEEEEEEEEEEEEE! Thanks Randy

03-02-2005, 07:59 PM	#1
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	72 K5 Blazer Project 4 Sale I HAVE A 72 K5 BLAZER FOR SALE, THAT I PICKED UP IN A SWAP. AS IT SITS IT HAS A 350/ SM465 /NP205 COMBO. THE MOTOR HAS BEEN SEALED & HAS A NEW EDELBROCK PERFORMER RPM MANIFOLD. IT HAS BFG ALL TERRAIN RADIAL TAs ON IT THAT ARE LIKE NEW. IT HAS NO TOP, ROLL BAR OR SEATS. THE MOTOR NEEDS HOSES , BELTS , AN EXHAUST SYSTEM & A CARB. & DISTRIBUTER. I NEED $1600 THE WAY IT SETS, OR $1000 WITHOUT THE MOTOR & TIRES. JOHN Attached Images __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST Last edited by junkyardjohn; 03-02-2005 at 08:03 PM.

03-02-2005, 11:44 PM	#3
donkey69 JB-80 &quot;Twice as Good&quot; Join Date: Jun 2004 Location: Central, MN Posts: 354	nice Blazer! Wow-that is one nice looking project,John! If only a guy could take a week off work I'd hook on the car trailer and Road Trip!! __________________ HEY NOW!

03-03-2005, 02:31 PM	#4
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	Thanks... This Blazer Has A Little Rust, But The Rocker Boxes & The Windshield Ring Are Super Solid. As An Incentive, I'll Throw In A Perfect,rustfree Set Of Fenders & Hood For An Additional $100 John __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

03-03-2005, 02:38 PM	#5
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	Where is the rust at? Any pics of the rust? __________________ Always looking for a 2wd blazer

03-03-2005, 03:02 PM	#6
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	YEP.. RUST IS IN THE TYPICAL SPOTS FOR THESE TRUCKS, BUT IS VERY REPAIRABLE. MOST OF THE RUST IS IN THE FLOORBOARDS & ON THE SIDES RIGHT BEHIND THE DOORS. THE P.O. HAS CUT THE RUST OUT OF THE DRIVERS SIDE FLOORBOARD IN ANTICIPATION OF THE PATCH PANELS. ALSO I HAVE ROCKER PANEL & FLOORBOARD PATCH PANELS THAT I WILL INCLUDE FOR FREE. JOHN __________________ CAN'T SEEM TO BE ABLE TO POST PIC.S . IF YOU P.M. ME WITH YOUR EMAIL ADDRESS , I'LL SEND YOU SOME PICS OF ALL THE RUST. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

03-02-2005, 08:16 PM	#2
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 601	sending pm

03-04-2005, 06:58 AM	#7
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Will you sell the motor?

03-04-2005, 04:49 PM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	MAN, I NEED THAT FOR A GOOD DAILY DRIVER, FINISH IT, WHY __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-04-2005, 09:44 PM	#11
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	I too can see Craig driving this around W. Tennessee while he's restoring and putting together GQ.

03-05-2005, 12:33 AM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	John, any idea how I could get it to KANSAS???? I'll pm you Sat, I just got home and need some sleep. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-05-2005, 01:10 AM	#13
crews It just doesn't matter Join Date: Apr 2001 Location: Huntington Beach, Ca Posts: 1,660	Whats the louvered hood in the back of it for????? __________________ 05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!!

03-05-2005, 01:19 AM	#15
crews It just doesn't matter Join Date: Apr 2001 Location: Huntington Beach, Ca Posts: 1,660	I knew you had good taste John.... __________________ 05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!!

03-05-2005, 01:48 PM	#18
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	john, If I can convince the wife, I would be interested in the truck... what about getting it to North Las Vegas? 89130?? Would you be interested in a trade for a C30 rolling dually chassis?? 157" wheel base. (included fuel tank under passanger side rail) Originally a 60k mile motor home. I still have to remove the drive train and cab for my other projects.... Attached Images __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

03-05-2005, 09:36 PM	#19
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	I'M NOT REALLY INTERESTED IN A TRADE, BUT I MAY BE ABLE TO GET IT DELIVERED FOR ABOUT 90 CENTS OR A DOLLAR A MILE. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

03-05-2005, 11:53 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I wonder if I can get anybody to haul it to Idaho Falls, Idaho from your place John? I have a nice member who would get it Denver for me from there. PLEASEEEEEEEEEEEEEEEEE! Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.