C-10,CST 10, Custom 10? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dano69c10 · 03-07-2005, 02:35 PM

What was the difference between the C-10, CST 10, and Custom 10 designation on 69 chevy trucks?
Thanx in advance
Dano

JerseyGirl · 03-07-2005, 02:41 PM

Isn't C10=Custom 10??

shifty · 03-07-2005, 02:47 PM

I thought CST 10 was custom 10?

71swb4x4 · 03-07-2005, 02:50 PM

I think CST is Custom Sport Truck, and C and Custom are the same.

**CPNE** · 03-07-2005, 03:06 PM

The number denoted tonnage. 10 = 1/2 ton, 20=3/4 ton, and 30=1 ton, unless you're a GMC then it's 1500, 2500, and 3500.

C/10 and Custom/10 are the same. C/10 is badging used in 69-70, Custom/10 is 71/72 badging. Just the series # was used in 67/68

Cheyenne and CST are synonimous, again CST being 67/70, Cheyenne being 71/72.

Basically you're talking levels of trim, CST (Cheyenne Super )being the highest level. Trim consists of vinyl options/inserts/scrolling, bright trim work on knobs and around glass, headliners, and special insulation, etc. In 67 you did get bucket seats too.

There is a mid-line trim level that falls in between Custom and Cheyenne. In 71/72, it was called "Custom Deluxe", in 67/70 it was called "Custom". So a 67-70 C/10 Custom is not the same truck as a 71/72 Custom/10. Confused yet?

None of these trim levels ever got you a special powertrain and or PS, PB, A/C, etc. These were all separate RPO's from the trim level RPO.

68gmcdually · 03-07-2005, 03:54 PM

It's been a long time since I have seen the emblems on my truck, but I was sure that they read 910. Could this be right. Also since mine is now a 1 ton what should the emblems be for it ('68 GMC).

*Gee_Emm* · 03-07-2005, 07:52 PM

910 920 930 etc are designations for Canadian GMC trucks. 910 being 1/2 ton, 920 3/4 ton 930 1 ton. Good luck finding some 930 emblems

68gmcdually · 03-08-2005, 04:03 PM

Quote:

Originally Posted by Gee_Emm

910 920 930 etc are designations for Canadian GMC trucks. 910 being 1/2 ton, 920 3/4 ton 930 1 ton. Good luck finding some 930 emblems

Thanks for the help. I have been trying to find some 930 emblems with no luck yet. I think that I am going to put the 910 ones on and go with them until some suitable ones. Any one out there with the right ones, that they are willing to separate with.

Robert1970C20rstbukt · 03-07-2005, 08:04 PM

I posted a thread like this a long time ago but it had to do with C/20, Custom/20, and CST/20. I think my truck originally had Custom/20 emblems but I think the regular C/20 emblems look better so that's what I went with. Now I have almost 8 of the C/20 emblems.

GenIIIShorty · 03-08-2005, 08:49 PM

i thought c-10 was just a 2wd half ton? i know a k-10 is a 4wd, right?

shifty · 03-08-2005, 08:55 PM

C= 4x2
K= 4x4

03-07-2005, 02:35 PM	#1
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	C-10,CST 10, Custom 10? What was the difference between the C-10, CST 10, and Custom 10 designation on 69 chevy trucks? Thanx in advance Dano __________________ '69 Fleet It ain't yours, if you didn't build it!

03-07-2005, 02:41 PM	#2
JerseyGirl American Woman! Join Date: Jan 2005 Location: TN Posts: 1,046	Isn't C10=Custom 10?? __________________ Tree Was Here! Click here to see pics of my new rig!

03-07-2005, 02:50 PM	#4
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	I think CST is Custom Sport Truck, and C and Custom are the same. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

03-07-2005, 03:06 PM	#5
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	The number denoted tonnage. 10 = 1/2 ton, 20=3/4 ton, and 30=1 ton, unless you're a GMC then it's 1500, 2500, and 3500. C/10 and Custom/10 are the same. C/10 is badging used in 69-70, Custom/10 is 71/72 badging. Just the series # was used in 67/68 Cheyenne and CST are synonimous, again CST being 67/70, Cheyenne being 71/72. Basically you're talking levels of trim, CST (Cheyenne Super )being the highest level. Trim consists of vinyl options/inserts/scrolling, bright trim work on knobs and around glass, headliners, and special insulation, etc. In 67 you did get bucket seats too. There is a mid-line trim level that falls in between Custom and Cheyenne. In 71/72, it was called "Custom Deluxe", in 67/70 it was called "Custom". So a 67-70 C/10 Custom is not the same truck as a 71/72 Custom/10. Confused yet? None of these trim levels ever got you a special powertrain and or PS, PB, A/C, etc. These were all separate RPO's from the trim level RPO. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

03-07-2005, 03:54 PM	#6
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,454	It's been a long time since I have seen the emblems on my truck, but I was sure that they read 910. Could this be right. Also since mine is now a 1 ton what should the emblems be for it ('68 GMC). __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed,

03-07-2005, 02:47 PM	#3
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	I thought CST 10 was custom 10?

03-07-2005, 07:52 PM	#7
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	910 920 930 etc are designations for Canadian GMC trucks. 910 being 1/2 ton, 920 3/4 ton 930 1 ton. Good luck finding some 930 emblems

03-07-2005, 08:04 PM	#9
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	I posted a thread like this a long time ago but it had to do with C/20, Custom/20, and CST/20. I think my truck originally had Custom/20 emblems but I think the regular C/20 emblems look better so that's what I went with. Now I have almost 8 of the C/20 emblems. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

03-08-2005, 08:49 PM	#10
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	i thought c-10 was just a 2wd half ton? i know a k-10 is a 4wd, right? __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

03-08-2005, 08:55 PM	#11
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	C= 4x2 K= 4x4 __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.